Package: linux-image-2.6.26-1-amd64
Version: 2.6.26-2
Severity: normal

I have LG modem, which connected by USB and have /dev/ttyACM0 name
(usually). I have internet connection using pppd daemon, which uses
/dev/ttyACM0. Randomly internet connection looses ip when kernel
re-enables USB port (see last 9 lines of kernel log attached).


-- Package-specific info:
** Version:
Linux version 2.6.26-1-amd64 (Debian 2.6.26-2) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Fri Aug 8 13:17:41 UTC 2008

** Command line:
root=/dev/sda5 ro

** Not tainted

** Kernel log:
[28390.194218] CPU1 attaching sched-domain:
[28390.194220] domain 0: span 0-1
[28390.194222] groups: 1 0
[28390.194224] domain 1: span 0-1
[28390.194226] groups: 0-1
[28390.109917] CPU1 is up
[28390.228738] Clockevents: could not switch to one-shot mode: lapic is not functional.
[28390.228742] Could not switch to high resolution mode on CPU 1
[28390.263178] ACPI: EC: non-query interrupt received, switching to interrupt mode
[28390.662041] PCI: Setting latency timer of device 0000:00:05.0 to 64
[28390.662064] PCI: Setting latency timer of device 0000:00:06.0 to 64
[28390.662101] PM: Writing back config space on device 0000:00:12.0 at offset 1 (was a300003, writing a300007)
[28390.662122] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
[28390.662148] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16
[28390.716818] usb usb1: root hub lost power or was reset
[28390.716829] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17
[28390.772815] usb usb2: root hub lost power or was reset
[28390.772826] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18
[28390.828817] usb usb3: root hub lost power or was reset
[28390.828827] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17
[28390.884825] usb usb4: root hub lost power or was reset
[28390.884836] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18
[28390.940812] usb usb5: root hub lost power or was reset
[28390.940827] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19
[28390.940874] usb usb6: root hub lost power or was reset
[28390.941858] ehci_hcd 0000:00:13.5: debug port 1
[28390.941958] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
[28390.957785] PM: Writing back config space on device 0000:00:14.2 at offset f (was 10a, writing a)
[28390.957809] PM: Writing back config space on device 0000:00:14.2 at offset 1 (was 4100006, writing 4100002)
[28390.957826] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
[28390.981785] ata3: SATA link down (SStatus 0 SControl 300)
[28390.981839] ata4: SATA link down (SStatus 0 SControl 300)
[28390.981865] ata2: SATA link down (SStatus 0 SControl 300)
[28391.062236] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 17
[28391.077768] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[28391.077807] PM: Writing back config space on device 0000:05:00.0 at offset 1 (was 100003, writing 100007)
[28391.113770] ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 21 (level, low) -> IRQ 21
[28391.113806] PM: Writing back config space on device 0000:08:00.0 at offset 1 (was 100002, writing 100006)
[28391.145763] ata1: softreset failed (device not ready)
[28391.145766] ata1: failed due to HW bug, retry pmp=0
[28391.149787] PM: Writing back config space on device 0000:08:01.0 at offset 4 (was 0, writing c0302000)
[28391.149794] PM: Writing back config space on device 0000:08:01.0 at offset 3 (was 800000, writing 804000)
[28391.149802] PM: Writing back config space on device 0000:08:01.0 at offset 1 (was 2100000, writing 2100006)
[28391.149822] ACPI: PCI Interrupt 0000:08:01.0[B] -> GSI 20 (level, low) -> IRQ 20
[28391.150869] PM: Writing back config space on device 0000:08:01.1 at offset 4 (was c0302c00, writing c0302400)
[28391.337785] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[28391.338890] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[28391.339507] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[28391.339510] ata1.00: configured for UDMA/100
[28391.339571] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[28391.339588] sd 0:0:0:0: [sda] Write Protect is off
[28391.339591] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[28391.339617] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[28392.682352] sd 0:0:0:0: [sda] Starting disk
[28392.990648] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[28392.994051] hda: UDMA/33 mode selected
[28393.070250] Restarting tasks ... <6>usb 3-1: USB disconnect, address 13
[28393.072911] done.
[28393.344958] usb 3-1: new full speed USB device using ohci_hcd and address 14
[28393.566051] usb 3-1: configuration #1 chosen from 1 choice
[28393.568121] cdc_acm 3-1:1.0: ttyACM1: USB ACM device
[28393.574202] usb 3-1: New USB device found, idVendor=1004, idProduct=6000
[28393.574206] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[28393.574209] usb 3-1: Product: LG CDMA USB Modem
[28393.574211] usb 3-1: Manufacturer: LG Eletronics, Inc
[28393.574247] usb 4-1: USB disconnect, address 3
[28393.864912] usb 4-1: new low speed USB device using ohci_hcd and address 4
[28394.035034] usb 4-1: configuration #1 chosen from 1 choice
[28394.042356] input: Genius Optical Mouse as /class/input/input10
[28394.064951] input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:13.3-1
[28394.065328] usb 4-1: New USB device found, idVendor=0458, idProduct=003a
[28394.065331] usb 4-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[28394.065334] usb 4-1: Product: Optical Mouse
[28394.065336] usb 4-1: Manufacturer: Genius
[28411.239240] [drm] Loading R300 Microcode
[28411.239265] [drm] Num pipes: 2
[28471.484229] usb 3-1: USB disconnect, address 14
[28473.796463] usb 3-1: new full speed USB device using ohci_hcd and address 15
[28474.017484] usb 3-1: configuration #1 chosen from 1 choice
[28474.019591] cdc_acm 3-1:1.0: ttyACM0: USB ACM device
[28474.026096] usb 3-1: New USB device found, idVendor=1004, idProduct=6000
[28474.026105] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[28474.026108] usb 3-1: Product: LG CDMA USB Modem
[28474.026110] usb 3-1: Manufacturer: LG Eletronics, Inc
[30523.081297] APIC error on CPU0: 00(40)
[31406.041856] APIC error on CPU0: 40(40)
[33824.144430] APIC error on CPU0: 40(40)
[34661.146098] APIC error on CPU0: 40(40)
[36027.732852] APIC error on CPU0: 40(40)
[38862.954356] APIC error on CPU0: 40(40)
[39596.104746] APIC error on CPU0: 40(40)
[42023.631473] hub 3-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[42023.631481] usb 3-1: USB disconnect, address 15
[42023.765312] usb 3-1: new full speed USB device using ohci_hcd and address 16
[42023.986547] usb 3-1: configuration #1 chosen from 1 choice
[42023.988819] cdc_acm 3-1:1.0: ttyACM0: USB ACM device
[42023.997752] usb 3-1: New USB device found, idVendor=1004, idProduct=6000
[42023.997760] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[42023.997763] usb 3-1: Product: LG CDMA USB Modem
[42023.997766] usb 3-1: Manufacturer: LG Eletronics, Inc

** Loaded modules:
Module Size Used by
kvm_amd 29324 0
kvm 127208 1 kvm_amd
ppp_deflate 9216 0
zlib_deflate 23960 1 ppp_deflate
zlib_inflate 18944 1 ppp_deflate
bsd_comp 9600 0
ppp_async 13056 1
crc_ccitt 6528 1 ppp_async
ppp_generic 27816 7 ppp_deflate,bsd_comp,ppp_async
slhc 10112 1 ppp_generic
radeon 133920 3
drm 91488 4 radeon
powernow_k8 17156 1
freq_table 9344 1 powernow_k8
ppdev 11656 0
parport_pc 31016 0
lp 14724 0
parport 41776 3 ppdev,parport_pc,lp
ipv6 288200 20
jfs 157904 1
nls_base 12932 1 jfs
ext2 66448 1
fuse 53184 1
dm_snapshot 19400 0
dm_mirror 20608 0
dm_log 13956 1 dm_mirror
dm_mod 58864 3 dm_snapshot,dm_mirror,dm_log
loop 19468 0
snd_hda_intel 434776 6
joydev 14848 0
arc4 6272 2
snd_pcm_oss 41760 0
ecb 7296 2
crypto_blkcipher 21636 1 ecb
snd_pcm 81800 3 snd_hda_intel,snd_pcm_oss
snd_mixer_oss 18816 1 snd_pcm_oss
b43 126376 0
rfkill 11168 1 b43
snd_seq_midi 11072 0
snd_rawmidi 26784 1 snd_seq_midi
video 24084 0
output 7808 1 video
snd_seq_dummy 7428 0
rng_core 8968 1 b43
mac80211 162864 1 b43
snd_seq_oss 33152 0
snd_seq_midi_event 11904 2 snd_seq_midi,snd_seq_oss
snd_seq 54304 6 snd_seq_midi,snd_seq_dummy,snd_seq_oss,snd_seq_mid i_event
cfg80211 30224 1 mac80211
wmi 11712 0
ac 8192 0
snd_timer 25744 3 snd_pcm,snd_seq
snd_seq_device 11668 5 snd_seq_midi,snd_rawmidi,snd_seq_dummy,snd_seq_oss ,snd_seq
serio_raw 9860 0
led_class 8968 1 b43
button 11680 0
shpchp 34080 0
i2c_piix4 13072 0
snd 63688 19 snd_hda_intel,snd_pcm_oss,snd_pcm,snd_mixer_oss,sn d_rawmidi,snd_seq_oss,snd_seq,snd_timer,snd_seq_de vice
battery 12032 0
input_polldev 8720 1 b43
k8temp 9216 0
dcdbas 11952 0
i2c_core 27936 1 i2c_piix4
cdc_acm 18720 2
psmouse 42268 0
soundcore 12064 1 snd
snd_page_alloc 13072 2 snd_hda_intel,snd_pcm
evdev 14208 7
pci_hotplug 32056 1 shpchp
pcspkr 7040 0
ext3 124688 2
jbd 51240 1 ext3
mbcache 12804 2 ext2,ext3
ide_cd_mod 36360 0
cdrom 37928 1 ide_cd_mod
usbhid 45792 0
hid 41792 1 usbhid
ff_memless 9224 1 usbhid
ata_generic 10116 0
sd_mod 29376 6
ide_pci_generic 9220 0 [permanent]
sdhci 19460 0
mmc_core 52448 1 sdhci
b44 29968 0
ricoh_mmc 8448 0
mii 9856 1 b44
ahci 32520 5
atiixp 8324 0 [permanent]
ide_core 128284 3 ide_cd_mod,ide_pci_generic,atiixp
libata 165472 2 ata_generic,ahci
ehci_hcd 36108 0
scsi_mod 160760 2 sd_mod,libata
dock 14112 1 libata
ohci_hcd 25092 0
ssb 43140 2 b43,b44
pcmcia 38680 2 b43,ssb
pcmcia_core 41508 3 b43,ssb,pcmcia
firmware_class 12544 2 b43,pcmcia
thermal 22688 0
processor 42304 2 powernow_k8,thermal
fan 9352 0
thermal_sys 17728 4 video,thermal,processor,fan

** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc RS480 Host Bridge [1002:5950] (rev 10)
Subsystem: Dell Device [1028:01f5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64

00:01.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a3f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: c0100000-c01fffff
Prefetchable memory behind bridge: 00000000c8000000-00000000cfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities:
Kernel modules: shpchp

00:05.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a37]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities:
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:06.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a38]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=07, sec-latency=0
Memory behind bridge: c0200000-c02fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities:
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01)
Subsystem: Dell Device [1028:01f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 8438 [size=8]
Region 1: I/O ports at 8454 [size=4]
Region 2: I/O ports at 8430 [size=8]
Region 3: I/O ports at 8450 [size=4]
Region 4: I/O ports at 8400 [size=16]
Region 5: Memory at c0004000 (32-bit, non-prefetchable) [size=1K]
Capabilities:
Kernel driver in use: ahci
Kernel modules: ahci

00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10)
Subsystem: Dell Device [1028:01f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c0005000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd

00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] (prog-if 10)
Subsystem: Dell Device [1028:01f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at c0006000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd

00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] (prog-if 10)
Subsystem: Dell Device [1028:01f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at c0007000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd

00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] (prog-if 10)
Subsystem: Dell Device [1028:01f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at c0008000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd

00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] (prog-if 10)
Subsystem: Dell Device [1028:01f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at c0009000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd

00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] (prog-if 20)
Subsystem: Dell Device [1028:01f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 19
Region 0: Memory at c0004400 (32-bit, non-prefetchable) [size=256]
Capabilities:
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14)
Subsystem: Dell Device [1028:01f5]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Region 0: I/O ports at 8410 [size=16]
Region 1: Memory at fed00000 (32-bit, non-prefetchable) [size=1K]
Capabilities:
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4

00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 8a [Master SecP PriP])
Subsystem: Dell Device [1028:01f5]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 8420 [size=16]
Kernel driver in use: ATIIXP_IDE
Kernel modules: atiixp, ide-pci-generic, ata_generic

00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia [1002:4383]
Subsystem: Dell Device [1028:01f5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin ? routed to IRQ 16
Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=16K]
Capabilities:
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d]
Subsystem: Dell Device [1028:01f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0

00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64
Bus: primary=00, secondary=08, subordinate=0a, sec-latency=64
Memory behind bridge: c0300000-c03fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Capabilities:

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Capabilities:
Kernel driver in use: k8temp
Kernel modules: k8temp

01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS485 [Radeon Xpress 1100 IGP] [1002:5975]
Subsystem: Dell Device [1028:01f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 66 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at c8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at c0120000 [disabled] [size=128K]
Capabilities:
Kernel modules: radeonfb

05:00.0 Network controller [0280]: Broadcom Corporation BCM94311MCG wlan mini-PCI [14e4:4311] (rev 01)
Subsystem: Dell Device [1028:0007]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at c0200000 (32-bit, non-prefetchable) [size=16K]
Capabilities:
Kernel driver in use: b43-pci-bridge
Kernel modules: ssb

08:00.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02)
Subsystem: Dell Device [1028:01f5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 64
Interrupt: pin A routed to IRQ 21
Region 0: Memory at c0300000 (32-bit, non-prefetchable) [size=8K]
Capabilities:
Kernel driver in use: b44
Kernel modules: b44

08:01.0 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 19)
Subsystem: Dell Device [1028:01f5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64
Interrupt: pin B routed to IRQ 20
Region 0: Memory at c0302000 (32-bit, non-prefetchable) [size=256]
Capabilities:
Kernel driver in use: sdhci
Kernel modules: sdhci

08:01.1 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 01)
Subsystem: Dell Device [1028:01f5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
Interrupt: pin B routed to IRQ 9
Region 0: Memory at c0302400 (32-bit, non-prefetchable) [size=256]
Capabilities:
Kernel modules: ricoh_mmc



-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.26-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.23 Debian configuration management sy
ii initramfs-tools [linux-initr 0.92e tools for generating an initramfs
ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo

linux-image-2.6.26-1-amd64 recommends no packages.

Versions of packages linux-image-2.6.26-1-amd64 suggests:
ii grub 0.97-28 GRand Unified Bootloader
pn linux-doc-2.6.26 (no description available)

-- debconf information:
linux-image-2.6.26-1-amd64/postinst/create-kimage-link-2.6.26-1-amd64: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-amd64/postinst/old-initrd-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/bootloader-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/initrd-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/postinst/old-system-map-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/depmod-error-initrd-2.6.26-1-amd64: false
linux-image-2.6.26-1-amd64/preinst/overwriting-modules-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/elilo-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/bootloader-error-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/abort-install-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/lilo-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/depmod-error-2.6.26-1-amd64: false
linux-image-2.6.26-1-amd64/prerm/removing-running-kernel-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/prerm/would-invalidate-boot-loader-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/bootloader-test-error-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/abort-overwrite-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/postinst/old-dir-initrd-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-amd64/preinst/failed-to-move-modules-2.6.26-1-amd64:



--
To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org