Package: installation-reports
Version: 2.29
Severity: important



-- Package-specific info:

Boot method: CD
Image version: 40r3-i386-netinst (build 20070308etch2)
Date: 2008-06-09

Machine: Microway 1U server
Partitions:

Disk /dev/hda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/hda1 * 1 34 273073+ 83 Linux
/dev/hda2 35 9729 77875087+ 5 Extended
/dev/hda5 35 642 4883728+ 83 Linux
/dev/hda6 643 1007 2931831 83 Linux
/dev/hda7 1008 1337 2650693+ 82 Linux swap / Solaris
/dev/hda8 1338 1386 393561 83 Linux
/dev/hda9 1387 9729 67015116 83 Linux

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [E]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]

Comments/Problems:

Overall, the install process was fine. After booting into new system I
noticed that the system was running a little slower than expected.
After poking around I noticed that a 486 kernel had been installed
instead of the 686 kernel that should have installed. I have four of
these machines, and all four suffered from the indentical problem.

Installing the 686 kernel and removing the 486 kernel fixed the problem.

This is a dual Athlon system.

--

Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.

Once you have filled out this report, mail it to submit@bugs.debian.org.

==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="4.0 (installer build 20070308etch2)"
X_INSTALLATION_MEDIUM=cdrom

==============================================
Installer hardware-summary:
==============================================
umame -a: Linux cytoplasm 2.6.18-6-486 #1 Sat Jan 26 08:50:43 UTC 2008 i686 unknown
lspci -nn: 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] System Controller [1022:700c] (rev 11)
lspci -nn: 00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] AGP Bridge [1022:700d]
lspci -nn: 00:07.0 ISA bridge [0601]: Advanced Micro Devices [AMD] AMD-768 [Opus] ISA [1022:7440] (rev 05)
lspci -nn: 00:07.1 IDE interface [0101]: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE [1022:7441] (rev 04)
lspci -nn: 00:07.3 Bridge [0680]: Advanced Micro Devices [AMD] AMD-768 [Opus] ACPI [1022:7443] (rev 03)
lspci -nn: 00:10.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-768 [Opus] PCI [1022:7448] (rev 05)
lspci -nn: 02:00.0 USB Controller [0c03]: Advanced Micro Devices [AMD] AMD-768 [Opus] USB [1022:7449] (rev 07)
lspci -nn: 02:06.0 VGA compatible controller [0300]: ATI Technologies IncRage 128 Pro Ultra TR [1002:5452]
lspci -nn: 02:08.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado] [10b7:9200] (rev 78)
lspci -vnn: 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] System Controller [1022:700c] (rev 11)
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 32
lspci -vnn: Memory at f4000000 (32-bit, prefetchable) [size=64M]
lspci -vnn: Memory at f03e0000 (32-bit, prefetchable) [size=4K]
lspci -vnn: I/O ports at 1010 [disabled] [size=4]
lspci -vnn: Capabilities: [a0] AGP version 2.0
lspci -vnn:
lspci -vnn: 00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] AGP Bridge [1022:700d]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 64
lspci -vnn: Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
lspci -vnn:
lspci -vnn: 00:07.0 ISA bridge [0601]: Advanced Micro Devices [AMD] AMD-768 [Opus] ISA [1022:7440] (rev 05)
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 0
lspci -vnn:
lspci -vnn: 00:07.1 IDE interface [0101]: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE [1022:7441] (rev 04) (prog-if 8a [Master SecP PriP])
lspci -vnn: Subsystem: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE [1022:7441]
lspci -vnn: Flags: bus master, medium devsel, latency 0
lspci -vnn: I/O ports at f000 [size=16]
lspci -vnn:
lspci -vnn: 00:07.3 Bridge [0680]: Advanced Micro Devices [AMD] AMD-768 [Opus] ACPI [1022:7443] (rev 03)
lspci -vnn: Subsystem: Advanced Micro Devices [AMD] AMD-768 [Opus] ACPI [1022:7443]
lspci -vnn: Flags: medium devsel
lspci -vnn:
lspci -vnn: 00:10.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-768 [Opus] PCI [1022:7448] (rev 05)
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 99
lspci -vnn: Bus: primary=00, secondary=02, subordinate=02, sec-latency=168
lspci -vnn: I/O behind bridge: 00002000-00002fff
lspci -vnn: Memory behind bridge: f0000000-f00fffff
lspci -vnn: Prefetchable memory behind bridge: f8000000-fbffffff
lspci -vnn:
lspci -vnn: 02:00.0 USB Controller [0c03]: Advanced Micro Devices [AMD] AMD-768 [Opus] USB [1022:7449] (rev 07) (prog-if 10)
lspci -vnn: Subsystem: Advanced Micro Devices [AMD] AMD-768 [Opus] USB [1022:7449]
lspci -vnn: Flags: bus master, medium devsel, latency 64, IRQ 169
lspci -vnn: Memory at f0004000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn:
lspci -vnn: 02:06.0 VGA compatible controller [0300]: ATI Technologies Inc Rage 128 Pro Ultra TR [1002:5452]
lspci -vnn: Subsystem: ATI Technologies Inc Unknown device [1002:0009]
lspci -vnn: Flags: bus master, stepping, medium devsel, latency 64, IRQ 11
lspci -vnn: Memory at f8000000 (32-bit, prefetchable) [size=64M]
lspci -vnn: I/O ports at 2000 [size=256]
lspci -vnn: Memory at f0000000 (32-bit, non-prefetchable) [size=16K]
lspci -vnn: [virtual] Expansion ROM at f0020000 [disabled] [size=128K]
lspci -vnn: Capabilities: [5c] Power Management version 2
lspci -vnn:
lspci -vnn: 02:08.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado] [10b7:9200] (rev 78)
lspci -vnn: Subsystem: Tyan Computer Unknown device [10f1:2466]
lspci -vnn: Flags: bus master, medium devsel, latency 80, IRQ 169
lspci -vnn: I/O ports at 2400 [size=128]
lspci -vnn: Memory at f0005000 (32-bit, non-prefetchable) [size=128]
lspci -vnn: [virtual] Expansion ROM at f0040000 [disabled] [size=128K]
lspci -vnn: Capabilities: [dc] Power Management version 2
lspci -vnn:
modulemap: 1022:7441 amd74xx
modulemap: 1022:7449 ohci_hcd
modulemap: 10b7:9200 3c59x
lsmod: Module Size Used by
lsmod: sd_mod 18832 0
lsmod: qnx4 10612 0
lsmod: ntfs 184084 0
lsmod: xfs 464756 0
lsmod: reiserfs 210432 0
lsmod: jfs 156380 0
lsmod: ext3 116488 5
lsmod: jbd 47272 1 ext3
lsmod: vfat 11392 0
lsmod: fat 45596 1 vfat
lsmod: 3c59x 40360 0
lsmod: mii 5376 1 3c59x
lsmod: nls_iso8859_1 4096 0
lsmod: rsrc_nonstatic 11648 0
lsmod: pcmcia_core 35856 1 rsrc_nonstatic
lsmod: isofs 31544 0
lsmod: ide_cd 35360 0
lsmod: ide_generic 1280 0 [permanent]
lsmod: pdc202xx_new 7808 0 [permanent]
lsmod: sc1200 6528 0 [permanent]
lsmod: sis5513 12296 0 [permanent]
lsmod: opti621 3972 0 [permanent]
lsmod: piix 9092 0 [permanent]
lsmod: pdc202xx_old 9344 0 [permanent]
lsmod: it821x 7684 0 [permanent]
lsmod: siimage 10880 0 [permanent]
lsmod: atiixp 5776 0 [permanent]
lsmod: cy82c693 4356 0 [permanent]
lsmod: trm290 3972 0 [permanent]
lsmod: alim15x3 11020 0 [permanent]
lsmod: via82cxxx 8324 0 [permanent]
lsmod: hpt34x 4992 0 [permanent]
lsmod: ns87415 4168 0 [permanent]
lsmod: rz1000 2688 0 [permanent]
lsmod: cs5520 4608 0 [permanent]
lsmod: serverworks 8328 0 [permanent]
lsmod: cs5535 4224 0 [permanent]
lsmod: jmicron 4096 0 [permanent]
lsmod: cs5530 4864 0 [permanent]
lsmod: triflex 3712 0 [permanent]
lsmod: slc90e66 4992 0 [permanent]
lsmod: aec62xx 6656 0 [permanent]
lsmod: cmd64x 9884 0 [permanent]
lsmod: sg 30108 0
lsmod: sr_mod 15652 0
lsmod: cdrom 32160 2 ide_cd,sr_mod
lsmod: vga16fb 11148 2
lsmod: vgastate 7680 1 vga16fb
lsmod: usbserial 28136 0
lsmod: usbhid 35552 0
lsmod: usbkbd 6656 0
lsmod: thermal 13320 0
lsmod: processor 23212 1 thermal
lsmod: fan 4740 0
lsmod: ide_disk 14720 7
lsmod: usb_storage 70976 0
lsmod: scsi_mod 121352 4 sd_mod,sg,sr_mod,usb_storage
lsmod: amd74xx 12956 0 [permanent]
lsmod: floppy 51748 0
lsmod: parport_pc 31268 0
lsmod: parport 31816 1 parport_pc
lsmod: generic 4740 0 [permanent]
lsmod: ide_core 107248 31 ide_cd,ide_generic,pdc202xx_new,sc1200,sis5513,opt i621,piix,pdc202xx_old,it821x,siimage,atiixp,cy82c 693,trm290,alim15x3,via82cxxx,hpt34x,ns87415,rz100 0,cs5520,serverworks,cs5535,jmicron,cs5530,triflex ,slc90e66,aec62xx,cmd64x,ide_disk,usb_storage,amd7 4xx,generic
lsmod: ohci_hcd 17284 0
lsmod: usbcore 108676 6 usbserial,usbhid,usbkbd,usb_storage,ohci_hcd
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 453396 428 452968 0% /dev
df: tmpfs 453396 428 452968 0% /dev
df: tmpfs 453396 428 452968 0% /.dev
df: /dev/ide/host0/bus0/target0/lun0/part1 264445 92625 158167 37% /target
df: /dev/ide/host0/bus0/target0/lun0/part9 65962184 184288 62427144 0% /target/home
df: /dev/ide/host0/bus0/target0/lun0/part8 381138 10289 351171 3% /target/tmp
df: /dev/ide/host0/bus0/target0/lun0/part5 4806904 357560 4205160 8% /target/usr
df: /dev/ide/host0/bus0/target0/lun0/part6 2885780 202184 2537008 7% /target/var
free: total used free shared buffers
free: Mem: 906792 569024 337768 0 45812
free: Swap: 2650684 0 2650684
free: Total: 3557476 569024 2988452
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 50: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 51: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : AuthenticAMD
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 6
/proc/cpuinfo: model name : AMD Athlon(tm) MP 2000+
/proc/cpuinfo: stepping : 2
/proc/cpuinfo: cpu MHz : 1666.826
/proc/cpuinfo: cache size : 256 KB
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 1
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow ts
/proc/cpuinfo: bogomips : 3336.14
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 01f0-01f7 : ide0
/proc/ioports: 02f8-02ff : serial
/proc/ioports: 0378-037a : parport0
/proc/ioports: 037b-037f : parport0
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f2-03f5 : floppy
/proc/ioports: 03f6-03f6 : ide0
/proc/ioports: 03f7-03f7 : floppy DIR
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 04d0-04d1 : pnp 00:06
/proc/ioports: 0778-077a : parport0
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: 1010-1013 : 0000:00:00.0
/proc/ioports: 2000-2fff : PCI Bus #02
/proc/ioports: 2000-20ff : 0000:02:06.0
/proc/ioports: 2400-247f : 0000:02:08.0
/proc/ioports: 8000-8003 : ACPI PM1a_EVT_BLK
/proc/ioports: 8004-8005 : ACPI PM1a_CNT_BLK
/proc/ioports: 8008-800b : ACPI PM_TMR
/proc/ioports: 8010-8015 : ACPI CPU throttle
/proc/ioports: 8020-8023 : ACPI GPE0_BLK
/proc/ioports: f000-f00f : 0000:00:07.1
/proc/ioports: f000-f007 : ide0
/proc/ioports: f008-f00f : ide1
/proc/iomem: 00000000-0009f7ff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 0009f800-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000c7fff : Video ROM
/proc/iomem: 000c8000-000c87ff : Adapter ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-3feeffff : System RAM
/proc/iomem: 00100000-00276ef8 : Kernel code
/proc/iomem: 00276ef9-0030cc73 : Kernel data
/proc/iomem: 3fef0000-3fefefff : ACPI Tables
/proc/iomem: 3feff000-3fefffff : ACPI Non-volatile Storage
/proc/iomem: 3ff00000-3ff7ffff : System RAM
/proc/iomem: 3ff80000-3fffffff : reserved
/proc/iomem: f0000000-f00fffff : PCI Bus #02
/proc/iomem: f0000000-f0003fff : 0000:02:06.0
/proc/iomem: f0004000-f0004fff : 0000:02:00.0
/proc/iomem: f0004000-f0004fff : ohci_hcd
/proc/iomem: f0005000-f000507f : 0000:02:08.0
/proc/iomem: f0020000-f003ffff : 0000:02:06.0
/proc/iomem: f0040000-f005ffff : 0000:02:08.0
/proc/iomem: f03e0000-f03e0fff : 0000:00:00.0
/proc/iomem: f4000000-f7ffffff : 0000:00:00.0
/proc/iomem: f8000000-fbffffff : PCI Bus #02
/proc/iomem: f8000000-fbffffff : 0000:02:06.0
/proc/iomem: fec00000-fec03fff : reserved
/proc/iomem: fee00000-fee00fff : reserved
/proc/iomem: fff80000-ffffffff : reserved
/proc/interrupts: CPU0
/proc/interrupts: 0: 142564 IO-APIC-edge timer
/proc/interrupts: 1: 355 IO-APIC-edge i8042
/proc/interrupts: 6: 8 IO-APIC-edge floppy
/proc/interrupts: 7: 0 IO-APIC-edge parport0
/proc/interrupts: 9: 0 IO-APIC-level acpi
/proc/interrupts: 14: 37185 IO-APIC-edge ide0
/proc/interrupts: 169: 67007 IO-APIC-level ohci_hcd:usb1, eth0
/proc/interrupts: NMI: 0
/proc/interrupts: LOC: 142524
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 906792 kB
/proc/meminfo: MemFree: 337792 kB
/proc/meminfo: Buffers: 45812 kB
/proc/meminfo: Cached: 459504 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 293064 kB
/proc/meminfo: Inactive: 225780 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 906792 kB
/proc/meminfo: LowFree: 337792 kB
/proc/meminfo: SwapTotal: 2650684 kB
/proc/meminfo: SwapFree: 2650684 kB
/proc/meminfo: Dirty: 788 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 13256 kB
/proc/meminfo: Mapped: 1716 kB
/proc/meminfo: Slab: 40384 kB
/proc/meminfo: PageTables: 216 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: CommitLimit: 3104080 kB
/proc/meminfo: Committed_AS: 16968 kB
/proc/meminfo: VmallocTotal: 122576 kB
/proc/meminfo: VmallocUsed: 8428 kB
/proc/meminfo: VmallocChunk: 113220 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 feffffdf ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
dmidecode: # dmidecode 2.8
dmidecode: SMBIOS 2.3 present.
dmidecode: 31 structures occupying 925 bytes.
dmidecode: Table at 0x000F0710.
dmidecode:
dmidecode: Handle 0x0000, DMI type 0, 20 bytes
dmidecode: BIOS Information
dmidecode: Vendor: Phoenix Technologies Ltd.
dmidecode: Version:
dmidecode: Release Date: 04/11/2003
dmidecode: Address: 0xE5AA0
dmidecode: Runtime Size: 107872 bytes
dmidecode: ROM Size: 256 kB
dmidecode: Characteristics:
dmidecode: ISA is supported
dmidecode: PCI is supported
dmidecode: PNP is supported
dmidecode: BIOS is upgradeable
dmidecode: BIOS shadowing is allowed
dmidecode: ESCD support is available
dmidecode: Boot from CD is supported
dmidecode: Selectable boot is supported
dmidecode: 5.25"/360 KB floppy services are supported (int 13h)
dmidecode: 5.25"/1.2 MB floppy services are supported (int 13h)
dmidecode: 3.5"/720 KB floppy services are supported (int 13h)
dmidecode: 3.5"/2.88 MB floppy services are supported (int 13h)
dmidecode: Print screen service is supported (int 5h)
dmidecode: 8042 keyboard services are supported (int 9h)
dmidecode: Serial services are supported (int 14h)
dmidecode: Printer services are supported (int 17h)
dmidecode: CGA/mono video services are supported (int 10h)
dmidecode: ACPI is supported
dmidecode: USB legacy is supported
dmidecode: AGP is supported
dmidecode: LS-120 boot is supported
dmidecode:
dmidecode: Handle 0x0001, DMI type 1, 25 bytes
dmidecode: System Information
dmidecode: Manufacturer: Unknown
dmidecode: Product Name: Unknown
dmidecode: Version: X2.0
dmidecode: Serial Number:
dmidecode: UUID: Not Settable
dmidecode: Wake-up Type: Power Switch
dmidecode:
dmidecode: Handle 0x0002, DMI type 2, 8 bytes
dmidecode: Base Board Information
dmidecode: Manufacturer: TYAN
dmidecode: Product Name: S2466 TIGER MPX
dmidecode: Version: A2
dmidecode: Serial Number:
dmidecode:
dmidecode: Handle 0x0003, DMI type 3, 17 bytes
dmidecode: Chassis Information
dmidecode: Manufacturer: Unknown
dmidecode: Type: Unknown
dmidecode: Lock: Not Present
dmidecode: Version: XX0000
dmidecode: Serial Number: None
dmidecode: Asset Tag: No Asset Tag
dmidecode: Boot-up State: Unknown
dmidecode: Power Supply State: Unknown
dmidecode: Thermal State: Unknown
dmidecode: Security Status: Unknown
dmidecode: OEM Information: 0x00000000
dmidecode:
dmidecode: Handle 0x0004, DMI type 4, 32 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: CPU0
dmidecode: Type: Central Processor
dmidecode: Family: Athlon
dmidecode: Manufacturer: AuthenticAMD
dmidecode: ID: 62 06 00 00 FF FB 83 03
dmidecode: Signature: Family 6, Model 6, Stepping 2
dmidecode: Flags:
dmidecode: FPU (Floating-point unit on-chip)
dmidecode: VME (Virtual mode extension)
dmidecode: DE (Debugging extension)
dmidecode: PSE (Page size extension)
dmidecode: TSC (Time stamp counter)
dmidecode: MSR (Model specific registers)
dmidecode: PAE (Physical address extension)
dmidecode: MCE (Machine check exception)
dmidecode: CX8 (CMPXCHG8 instruction supported)
dmidecode: APIC (On-chip APIC hardware supported)
dmidecode: SEP (Fast system call)
dmidecode: MTRR (Memory type range registers)
dmidecode: PGE (Page global enable)
dmidecode: MCA (Machine check architecture)
dmidecode: CMOV (Conditional move instruction supported)
dmidecode: PAT (Page attribute table)
dmidecode: PSE-36 (36-bit page size extension)
dmidecode: MMX (MMX technology supported)
dmidecode: FXSR (Fast floating-point save and restore)
dmidecode: SSE (Streaming SIMD extensions)
dmidecode: Version: AMD Athlon(tm) pr
dmidecode: Voltage: 1.6 V
dmidecode: External Clock: Unknown
dmidecode: Max Speed: 2100 MHz
dmidecode: Current Speed: Unknown
dmidecode: Status: Populated, Enabled
dmidecode: Upgrade: Slot 1
dmidecode: L1 Cache Handle: 0x000B
dmidecode: L2 Cache Handle: 0x000C
dmidecode: L3 Cache Handle: Not Provided
dmidecode:
dmidecode: Handle 0x0005, DMI type 4, 32 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: CPU1
dmidecode: Type: Central Processor
dmidecode: Family: Athlon
dmidecode: Manufacturer: GenuineIntel
dmidecode: ID: 62 06 00 00 FF FB 83 03
dmidecode: Signature: Family 6, Model 6, Stepping 2
dmidecode: Flags:
dmidecode: FPU (Floating-point unit on-chip)
dmidecode: VME (Virtual mode extension)
dmidecode: DE (Debugging extension)
dmidecode: PSE (Page size extension)
dmidecode: TSC (Time stamp counter)
dmidecode: MSR (Model specific registers)
dmidecode: PAE (Physical address extension)
dmidecode: MCE (Machine check exception)
dmidecode: CX8 (CMPXCHG8 instruction supported)
dmidecode: APIC (On-chip APIC hardware supported)
dmidecode: SEP (Fast system call)
dmidecode: MTRR (Memory type range registers)
dmidecode: PGE (Page global enable)
dmidecode: MCA (Machine check architecture)
dmidecode: CMOV (Conditional move instruction supported)
dmidecode: PAT (Page attribute table)
dmidecode: PSE-36 (36-bit page size extension)
dmidecode: MMX (MMX technology supported)
dmidecode: FXSR (Fast floating-point save and restore)
dmidecode: SSE (Streaming SIMD extensions)
dmidecode: Version: AMD Athlon(tm) pr
dmidecode: Voltage: 1.6 V
dmidecode: External Clock: Unknown
dmidecode: Max Speed: 2100 MHz
dmidecode: Current Speed: Unknown
dmidecode: Status: Populated, Enabled
dmidecode: Upgrade: Slot 1
dmidecode: L1 Cache Handle: 0x0009
dmidecode: L2 Cache Handle: 0x000A
dmidecode: L3 Cache Handle: Not Provided
dmidecode:
dmidecode: Handle 0x0006, DMI type 5, 24 bytes
dmidecode: Memory Controller Information
dmidecode: Error Detecting Method: None
dmidecode: Error Correcting Capabilities:
dmidecode: None
dmidecode: Supported Interleave: One-way Interleave
dmidecode: Current Interleave: One-way Interleave
dmidecode: Maximum Memory Module Size: 4096 MB
dmidecode: Maximum Total Memory Size: 16384 MB
dmidecode: Supported Speeds:
dmidecode: Other
dmidecode: Supported Memory Types:
dmidecode: DIMM
dmidecode: Memory Module Voltage: 3.3 V
dmidecode: Associated Memory Slots: 4
dmidecode: 0x0006
dmidecode: 0x0007
dmidecode: 0x0008
dmidecode: 0x0009
dmidecode: Enabled Error Correcting Capabilities:
dmidecode: Unknown
dmidecode:
dmidecode: Handle 0x0007, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIM1
dmidecode: Bank Connections: 0 1
dmidecode: Current Speed: 10 ns
dmidecode: Type: DIMM SDRAM
dmidecode: Installed Size: 512 MB (Double-bank Connection)
dmidecode: Enabled Size: 512 MB (Double-bank Connection)
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x0008, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIM2
dmidecode: Bank Connections: 2 3
dmidecode: Current Speed: 10 ns
dmidecode: Type: DIMM SDRAM
dmidecode: Installed Size: Not Installed
dmidecode: Enabled Size: Not Installed
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x0009, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIM3
dmidecode: Bank Connections: 4 5
dmidecode: Current Speed: 10 ns
dmidecode: Type: DIMM SDRAM
dmidecode: Installed Size: 512 MB (Double-bank Connection)
dmidecode: Enabled Size: 512 MB (Double-bank Connection)
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x000A, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIM4
dmidecode: Bank Connections: 6 7
dmidecode: Current Speed: 10 ns
dmidecode: Type: DIMM SDRAM
dmidecode: Installed Size: Not Installed
dmidecode: Enabled Size: Not Installed
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x000B, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L1 Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 1
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 64 KB
dmidecode: Maximum Size: 64 KB
dmidecode: Supported SRAM Types:
dmidecode: Burst
dmidecode: Pipeline Burst
dmidecode: Asynchronous
dmidecode: Installed SRAM Type: Asynchronous
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Unknown
dmidecode: System Type: Unknown
dmidecode: Associativity: Unknown
dmidecode:
dmidecode: Handle 0x000C, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L2 Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 2
dmidecode: Operational Mode: Write Through
dmidecode: Location: Internal
dmidecode: Installed Size: 256 KB
dmidecode: Maximum Size: 512 KB
dmidecode: Supported SRAM Types:
dmidecode: Burst
dmidecode: Pipeline Burst
dmidecode: Synchronous
dmidecode: Installed SRAM Type: Synchronous
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Unknown
dmidecode: System Type: Unified
dmidecode: Associativity: Unknown
dmidecode:
dmidecode: Handle 0x000D, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: AGP Slot
dmidecode: Type: 32-bit AGP 2x
dmidecode: Current Usage: Unknown
dmidecode: Length: Long
dmidecode: ID: 0
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x000E, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI Slot 1
dmidecode: Type: 64-bit PCI-66
dmidecode: Current Usage: Unknown
dmidecode: Length: Long
dmidecode: ID: 0
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x000F, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI Slot 2
dmidecode: Type: 64-bit PCI-66
dmidecode: Current Usage: Unknown
dmidecode: Length: Long
dmidecode: ID: 0
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0010, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI Slot 3
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Unknown
dmidecode: Length: Long
dmidecode: ID: 0
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0011, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI Slot 4
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Unknown
dmidecode: Length: Long
dmidecode: ID: 0
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0012, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI Slot 5
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Unknown
dmidecode: Length: Long
dmidecode: ID: 0
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0013, DMI type 10, 6 bytes
dmidecode: On Board Device Information
dmidecode: Type: Ethernet
dmidecode: Status: Disabled
dmidecode: Description: 3COM 3C920/3C980
dmidecode:
dmidecode: Handle 0x0014, DMI type 11, 5 bytes
dmidecode: OEM Strings
dmidecode: String 1: 0
dmidecode: String 2: 0
dmidecode: String 3: .........................
dmidecode:
dmidecode: Handle 0x0015, DMI type 16, 15 bytes
dmidecode: Physical Memory Array
dmidecode: Location: System Board Or Motherboard
dmidecode: Use: System Memory
dmidecode: Error Correction Type: None
dmidecode: Maximum Capacity: 4 GB
dmidecode: Error Information Handle: Not Provided
dmidecode: Number Of Devices: 4
dmidecode:
dmidecode: Handle 0x0016, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0015
dmidecode: Error Information Handle: No Error
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 32 bits
dmidecode: Size: 512 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: 1
dmidecode: Locator: S1
dmidecode: Bank Locator: Bank 1
dmidecode: Type: DRAM
dmidecode: Type Detail: Synchronous
dmidecode: Speed: Unknown
dmidecode:
dmidecode: Handle 0x0017, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0015
dmidecode: Error Information Handle: No Error
dmidecode: Total Width: Unknown
dmidecode: Data Width: Unknown
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: 2
dmidecode: Locator: S2
dmidecode: Bank Locator: Bank 2
dmidecode: Type: DRAM
dmidecode: Type Detail: Synchronous
dmidecode: Speed: Unknown
dmidecode:
dmidecode: Handle 0x0018, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0015
dmidecode: Error Information Handle: No Error
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 32 bits
dmidecode: Size: 512 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: 3
dmidecode: Locator: S3
dmidecode: Bank Locator: Bank 3
dmidecode: Type: DRAM
dmidecode: Type Detail: Synchronous
dmidecode: Speed: Unknown
dmidecode:
dmidecode: Handle 0x0019, DMI type 19, 15 bytes
dmidecode: Memory Array Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0003FFFFFFF
dmidecode: Range Size: 1 GB
dmidecode: Physical Array Handle: 0x0015
dmidecode: Partition Width: 0
dmidecode:
dmidecode: Handle 0x001A, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0001FFFFFFF
dmidecode: Range Size: 512 MB
dmidecode: Physical Device Handle: 0x0016
dmidecode: Memory Array Mapped Address Handle: 0x0019
dmidecode: Partition Row Position: 1
dmidecode: Interleaved Data Depth: 1
dmidecode:
dmidecode: Handle 0x001B, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x0001FFFFC00
dmidecode: Ending Address: 0x0001FFFFFFF
dmidecode: Range Size: 1 kB
dmidecode: Physical Device Handle: 0x0017
dmidecode: Memory Array Mapped Address Handle: 0x0019
dmidecode: Partition Row Position: 1
dmidecode: Interleaved Data Depth: 1
dmidecode:
dmidecode: Handle 0x001C, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00020000000
dmidecode: Ending Address: 0x0003FFFFFFF
dmidecode: Range Size: 512 MB
dmidecode: Physical Device Handle: 0x0018
dmidecode: Memory Array Mapped Address Handle: 0x0019
dmidecode: Partition Row Position: 1
dmidecode: Interleaved Data Depth: 1
dmidecode:
dmidecode: Handle 0x001D, DMI type 32, 11 bytes
dmidecode: System Boot Information
dmidecode: Status: No errors detected
dmidecode:
dmidecode: Handle 0x001E, DMI type 127, 4 bytes
dmidecode: End Of Table
dmidecode:

==============================================
Installer status:
==============================================
Package: preseed-common
Status: install ok unpacked
Version: 1.28
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding

Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone

Package: localechooser
Status: install ok installed
Version: 1.37
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10

Package: acpi-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: acpi-modules
Depends: kernel-image-2.6.18-6-486-di
Description: ACPI support modules

Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-13etch5
Description: GNU C Library: NSS helper for DNS - udeb

Package: usb-serial-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: usb-serial-modules
Depends: kernel-image-2.6.18-6-486-di, usb-modules-2.6.18-6-486-di
Description: USB serial drivers

Package: cdrom-checker
Status: install ok unpacked
Version: 1.11
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940

Package: sata-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: sata-modules
Depends: kernel-image-2.6.18-6-486-di, scsi-core-modules-2.6.18-6-486-di
Description: SATA drivers

Package: lowmemcheck
Status: install ok unpacked
Version: 1.25
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode

Package: cdrom-retriever
Status: install ok installed
Version: 1.14
Provides: retriever
Depends: cdebconf-udeb, cdrom-detect
Description: Fetch modules from a CDROM

Package: main-menu
Status: install ok unpacked
Version: 1.18
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: Debian installer main menu

Package: di-utils-shell
Status: install ok unpacked
Version: 1.45etch1
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950

Package: cdrom-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: cdrom-modules
Depends: ide-modules-2.6.18-6-486-di, cdrom-core-modules-2.6.18-6-486-di,kernel-image-2.6.18-6-486-di
Description: Esoteric CDROM drivers

Package: di-utils
Status: install ok installed
Version: 1.45etch1
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: Miscellaneous utilities for the debian installer

Package: serial-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: serial-modules
Depends: kernel-image-2.6.18-6-486-di, pcmcia-modules-2.6.18-6-486-di
Description: Serial drivers

Package: ide-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: ide-modules
Depends: kernel-image-2.6.18-6-486-di, ide-core-modules-2.6.18-6-486-di
Description: IDE drivers

Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.114etch1
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0..52
Description: Newt frontend for Debian Configuration Management System

Package: input-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: input-modules
Depends: kernel-image-2.6.18-6-486-di, usb-modules-2.6.18-6-486-di
Description: Input devices support

Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.3-pre4-2
Depends: libc6 (>= 2.3.6-6)
Description: tools for managing Linux kernel modules

Package: rootskel
Status: install ok installed
Version: 1.50+b1
Depends: di-utils (>= 1.43), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer

Package: udev-udeb
Status: install ok unpacked
Version: 0.105-4
Depends: libc6 (>= 2.3.6-6)
Description: /dev/ and hotplug management daemon

Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-7.1
Depends: libc6 (>= 2.3.6-6)
Description: Access software for a blind person using a soft braille terminal

Package: usb-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: usb-modules
Depends: kernel-image-2.6.18-6-486-di
Description: USB support

Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.6-6)
Description: Free Implementation of the Unicode BiDi algorithm

Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.6-6)
Description: text-wrapping library with i18n - runtime udeb

Package: auto-install
Status: install ok unpacked
Version: 0.03
Depends: cdebconf-udeb, netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 19

Package: usb-discover
Status: install ok unpacked
Version: 1.06
Depends: cdebconf-udeb
Description: Discover USB and load kernel modules

Package: rescue-check
Status: install ok unpacked
Version: 1.9
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>=1.18)
Description: enter d-i rescue mode if requested

Package: nano-udeb
Status: install ok unpacked
Version: 2.0.2-1etch1
Provides: editor
Depends: libc6 (>= 2.3.6-6), libslang2-udeb (>= 2.0.6-3)
Description: free Pico clone with some new features - tiny build

Package: cdebconf-udeb
Status: install ok installed
Version: 0.114etch1
Provides: debconf-2.0
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)

Package: ai-choosers
Status: install ok unpacked
Version: 0.03
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 22

Package: cdrom-core-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: cdrom-core-modules
Depends: kernel-image-2.6.18-6-486-di, scsi-core-modules-2.6.18-6-486-di,ide-modules-2.6.18-6-486-di
Description: CDROM support

Package: kernel-image-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer

Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions

Package: load-cdrom
Status: install ok installed
Version: 1.14
Depends: cdebconf-udeb, cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 16

Package: fat-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: fat-modules
Depends: kernel-image-2.6.18-6-486-di
Description: FAT filesystem support

Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.114etch1
Depends: cdebconf-udeb, libc6 (>= 2.3.6-6)
Description: Plain text frontend for Debian Configuration Management System

Package: iso-3166-udeb
Status: install ok installed
Version: 1.0a-1
Description: provides iso_3166.tab file

Package: ide-core-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: ide-core-modules
Depends: kernel-image-2.6.18-6-486-di
Description: IDE support

Package: pcmcia-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: pcmcia-modules
Depends: kernel-image-2.6.18-6-486-di, firmware-modules-2.6.18-6-486-di
Description: Common PCMCIA drivers

Package: floppy-retriever
Status: install ok unpacked
Version: 1.14
Provides: retriever
Depends: cdebconf-udeb, mountfloppy
Description: Fetches modules from a floppy

Package: usb-storage-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: usb-storage-modules
Depends: ide-core-modules-2.6.18-6-486-di, scsi-core-modules-2.6.18-6-486-di, usb-modules-2.6.18-6-486-di
Description: USB storage support

Package: ethdetect
Status: install ok installed
Version: 1.50
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 17

Package: scsi-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: scsi-modules
Depends: kernel-image-2.6.18-6-486-di, scsi-core-modules-2.6.18-6-486-di,parport-modules-2.6.18-6-486-di, cdrom-core-modules-2.6.18-6-486-di, firmware-modules-2.6.18-6-486-di
Description: SCSI drivers

Package: scsi-core-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: scsi-core-modules
Depends: kernel-image-2.6.18-6-486-di
Description: Core SCSI subsystem

Package: firewire-core-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.18-6-486-di, kernel-image-2.6.18-6-486-di
Description: Core FireWire drivers

Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-4
Depends: libc6 (>= 2.3.6-6)
Description: Tiny utilities for the debian-installer

Package: initrd-preseed
Status: install ok unpacked
Version: 1.28
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd

Package: archdetect
Status: install ok installed
Version: 1.50
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50)
Description: Hardware architecture detector

Package: save-logs
Status: install ok unpacked
Version: 2.29
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940

Package: di-utils-reboot
Status: install ok unpacked
Version: 1.45etch1
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 995

Package: anna
Status: install ok installed
Version: 1.27
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it willdo

Package: firmware-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: firmware-modules
Depends: kernel-image-2.6.18-6-486-di
Description: Firmware request modules

Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.1.0-1
Provides: libsysfs2
Depends: libc6 (>= 2.3.6-6)
Description: interface library to sysfs

Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-3
Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6

Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4~pre4-1
Depends: libc6 (>= 2.3.6-6)
Description: Linux PCI Utilities (udeb)

Package: console-keymaps-at
Status: install ok installed
Version: 2:1.01-7
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards

Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.45etch1
Description: Terminfo entries needed by newt/slang in debian installer

Package: hw-detect
Status: install ok installed
Version: 1.50
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it

Package: kbd-chooser
Status: install ok installed
Version: 1.34
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12

Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.50etch1
Depends: libc6 (>= 2.3.6-6)
Description: Library of common debian-installer functions

Package: scsi-common-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: scsi-common-modules
Depends: kernel-image-2.6.18-6-486-di, scsi-core-modules-2.6.18-6-486-di,cdrom-core-modules-2.6.18-6-486-di
Description: Very common SCSI drivers

Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale

Package: parport-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: parport-modules
Depends: kernel-image-2.6.18-6-486-di
Description: Parallel port support

Package: env-preseed
Status: install ok unpacked
Version: 1.28
Description: debconf preseeding via environment variables

Package: mountfloppy
Status: install ok unpacked
Version: 0.11
Depends: cdebconf-udeb, di-utils (>= 1.15)
Description: Mounts a floppy

Package: cdebconf-priority
Status: install ok unpacked
Version: 0.114etch1
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930

Package: netcfg
Status: install ok installed
Version: 1.36
Provides: configured-network
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18

Package: file-preseed
Status: install ok unpacked
Version: 1.28
Depends: cdebconf-udeb, di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14

Package: floppy-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: floppy-modules
Depends: kernel-image-2.6.18-6-486-di
Description: Floppy driver

Package: pcmcia-storage-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.18-6-486-di, ide-core-modules-2.6.18-6-486-di, cdrom-core-modules-2.6.18-6-486-di, pcmcia-modules-2.6.18-6-486-di
Description: PCMCIA storage drivers

Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.114etch1
Depends: libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)

Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.5
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal

Package: fb-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: fb-modules
Depends: kernel-image-2.6.18-6-486-di
Description: Frame buffer support

Package: cdrom-detect
Status: install ok installed
Version: 1.20etch1
Depends: cdebconf-udeb, hw-detect, di-utils (>= 1.45etch1)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 13

Package: debian-installer
Status: install ok installed
Version: cdrom-isolinux-20070308etch2
Description: debian installation image

Package: zlib1g-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Mark Brown
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
zlib is a library implementing the deflate compression method found
in gzip and PKZIP. This minimal package includes the shared library
for use with the Debian installer.

Package: apt-cdrom-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team
Version: 1:0.20etch1
Depends: cdrom-detect, cdebconf-udeb
Provides: apt-mirror-setup
Description: set up a CD in sources.list

Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team
Version: 1:0.20etch1
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list

Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team
Version: 1:0.20etch1
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70

Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 632
Maintainer: Debian Install System Team
Version: 1.76
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19), gpgv-udeb
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65

Package: choose-mirror-bin
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 324
Maintainer: Debian Install System Team
Version: 2.13etch2
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50etch1), cdebconf-udeb
Description: Choose mirror to install from (program)

Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 76
Maintainer: Debian Install System Team
Version: 0.15
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62

Package: crc-modules-2.6.18-6-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team
Version: 1.44etch3
Depends: kernel-image-2.6.18-6-486-di
Provides: crc-modules
Description: CRC modules
This package contains CRC support modules.

Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 168
Maintainer: Anthony Towns
Version: 0.3.3.2etch1
Depends: libc6 (>= 2.3.6-6), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.