Bug#488799: linux-image-2.6.25-2-686: power button produces multiple events - Debian

This is a discussion on Bug#488799: linux-image-2.6.25-2-686: power button produces multiple events - Debian ; Package: linux-image-2.6.25-2-686 Version: 2.6.25-5 Severity: normal Pressing the power button produces two acpi events most of the time. This makes using the event for something like hibernate quite difficult. I do not see any particular pattern in the behaviour. Pressing ...

+ Reply to Thread
Results 1 to 5 of 5

Thread: Bug#488799: linux-image-2.6.25-2-686: power button produces multiple events

  1. Bug#488799: linux-image-2.6.25-2-686: power button produces multiple events

    Package: linux-image-2.6.25-2-686
    Version: 2.6.25-5
    Severity: normal


    Pressing the power button produces two acpi events most of the time.
    This makes using the event for something like hibernate quite difficult.

    I do not see any particular pattern in the behaviour. Pressing the
    power button usually produces two events but sometimes only one is
    produced.


    -- Package-specific info:
    ** Version:
    Linux version 2.6.25-2-686 (Debian 2.6.25-5) (waldi@debian.org) (gcc version 4.1.3 20080420 (prerelease) (Debian 4.1.2-22)) #1 SMP Thu Jun 12 16:26:30 UTC 2008

    ** Command line:
    root=/dev/mapper/nc4010-root ro video=radeonfb

    ** Not tainted

    ** Kernel log:
    [17910.246553] .max_vruntime : 0.000001
    [17910.246555] .spread : 0.000000
    [17910.246557] .spread0 : 0.000000
    [17910.246559] .nr_running : 0
    [17910.246561] .load : 0
    [17910.246563] .nr_spread_over : 0
    [17910.246564]
    [17910.246565] cfs_rq
    [17910.246567] .exec_clock : 0.000000
    [17910.246569] .MIN_vruntime : 0.000001
    [17910.246571] .min_vruntime : 3462698.548046
    [17910.246573] .max_vruntime : 0.000001
    [17910.246575] .spread : 0.000000
    [17910.246577] .spread0 : 0.000000
    [17910.246579] .nr_running : 0
    [17910.246581] .load : 0
    [17910.246583] .nr_spread_over : 0
    [17910.246584]
    [17910.246585] cfs_rq
    [17910.246587] .exec_clock : 0.000000
    [17910.246589] .MIN_vruntime : 0.000001
    [17910.246591] .min_vruntime : 3462698.548046
    [17910.246594] .max_vruntime : 0.000001
    [17910.246596] .spread : 0.000000
    [17910.246598] .spread0 : 0.000000
    [17910.246600] .nr_running : 1
    [17910.246601] .load : 1024
    [17910.246603] .nr_spread_over : 0
    [17910.246606]
    [17910.246607] runnable tasks:
    [17910.246608] task PID tree-key switches prio exec-runtime sum-exec sum-sleep
    [17910.246610] ----------------------------------------------------------------------------------------------------------
    [17910.246619] R s2disk 22175 2528841.509814 3575934 120 0 0 0.000000 0.000000 0.000000
    [17910.246626]
    [17910.246643] cifsd
    [17910.246648]
    [17910.246650] Restarting tasks ... done.
    [17910.433877] input: Power Button (FF) as /class/input/input29
    [17910.466845] ACPI: Power Button (FF) [PWRF]
    [17910.468782] input: Sleep Button (CM) as /class/input/input30
    [17910.494842] ACPI: Sleep Button (CM) [C13C]
    [17910.496740] input: Lid Switch as /class/input/input31
    [17910.507008] ACPI: Lid Switch [C13B]
    [17910.528340] ACPI: PCI Interrupt 0000:00:12.2[C] -> Link [C0C6] -> GSI 10 (level, low) -> IRQ 10
    [17910.530299] ehci_hcd 0000:00:12.2: EHCI Host Controller
    [17910.530815] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 3
    [17910.532699] ehci_hcd 0000:00:12.2: irq 10, io mem 0x98400000
    [17910.546804] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    [17910.548817] usb usb3: configuration #1 chosen from 1 choice
    [17910.550663] hub 3-0:1.0: USB hub found
    [17910.550770] hub 3-0:1.0: 5 ports detected
    [17910.654991] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
    [17910.656851] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [17910.658510] usb usb3: Product: EHCI Host Controller
    [17910.658764] usb usb3: Manufacturer: Linux 2.6.25-2-686 ehci_hcd
    [17910.660542] usb usb3: SerialNumber: 0000:00:12.2
    [17911.998964] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
    [17911.999010] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
    [17911.999083] agpgart: Putting AGP V2 device at 0000:01:05.0 into 4x mode
    [17920.195368] CIFS VFS: Unexpected lookup error -112
    [18042.508246] tg3: eth0: Link is down.
    [18044.797119] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [18053.843828] tg3: eth0: Link is up at 100 Mbps, full duplex.
    [18053.843828] tg3: eth0: Flow control is on for TX and on for RX.
    [18053.843828] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [18064.096826] eth0: no IPv6 routers present
    [18592.691736] usb 3-3: new high speed USB device using ehci_hcd and address 2
    [18592.796195] usb 3-3: configuration #1 chosen from 1 choice
    [18592.797573] usb 3-3: New USB device found, idVendor=090c, idProduct=1000
    [18592.797588] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [18592.797596] usb 3-3: Product: Flash Voyager
    [18592.797602] usb 3-3: Manufacturer: Corsair
    [18592.797608] usb 3-3: SerialNumber: A900000000012912
    [18593.034311] Initializing USB Mass Storage driver...
    [18593.037841] scsi0 : SCSI emulation for USB Mass Storage devices
    [18593.038497] usbcore: registered new interface driver usb-storage
    [18593.038509] USB Mass Storage support registered.
    [18593.076928] usb-storage: device found at 2
    [18593.076942] usb-storage: waiting for device to settle before scanning
    [18598.051110] usb-storage: device scan complete
    [18598.052751] scsi 0:0:0:0: Direct-Access Corsair Flash Voyager 1100 PQ: 0 ANSI: 0 CCS
    [18598.174677] Driver 'sd' needs updating - please use bus_type methods
    [18598.178991] sd 0:0:0:0: [sda] 15859712 512-byte hardware sectors (8120 MB)
    [18598.179745] sd 0:0:0:0: [sda] Write Protect is off
    [18598.179752] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
    [18598.179756] sd 0:0:0:0: [sda] Assuming drive cache: write through
    [18598.182489] sd 0:0:0:0: [sda] 15859712 512-byte hardware sectors (8120 MB)
    [18598.184921] sd 0:0:0:0: [sda] Write Protect is off
    [18598.184929] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
    [18598.184933] sd 0:0:0:0: [sda] Assuming drive cache: write through
    [18598.184937] sda: sda1
    [18598.210786] sd 0:0:0:0: [sda] Attached SCSI removable disk
    [18604.055184] usb 3-3: USB disconnect, address 2
    [18608.571461] CIFS VFS: Unexpected lookup error -112
    [21965.262362] tg3: eth0: Link is down.
    [21967.686119] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [22096.413024] tg3: eth0: Link is up at 100 Mbps, full duplex.
    [22096.413024] tg3: eth0: Flow control is on for TX and on for RX.
    [22096.413024] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [22106.555693] eth0: no IPv6 routers present

    ** Loaded modules:
    Module Size Used by
    sd_mod 26072 0
    usb_storage 76896 0
    ehci_hcd 32620 0
    button 8240 0
    nls_utf8 2080 1
    cifs 204148 1
    nls_base 7268 2 nls_utf8,cifs
    binfmt_misc 11144 1
    radeon 113152 2
    drm 72280 3 radeon
    ppdev 8676 0
    lp 11012 0
    sbs 8544 0
    sbshc 6784 1 sbs
    acpi_cpufreq 9260 0
    cpufreq_conservative 7432 0
    cpufreq_ondemand 8428 1
    cpufreq_userspace 3812 0
    cpufreq_stats 5216 0
    freq_table 4512 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
    cpufreq_powersave 1856 0
    ipv6 241956 22
    loop 16708 0
    joydev 11328 0
    irtty_sir 6176 0
    pcmcia 36044 0
    sir_dev 13764 1 irtty_sir
    firmware_class 9088 1 pcmcia
    parport_pc 25860 1
    irda 106200 1 sir_dev
    parport 33868 3 ppdev,lp,parport_pc
    crc_ccitt 2176 1 irda
    rtc 14272 0
    pcspkr 3136 0
    snd_ali5451 21740 1
    serio_raw 6532 0
    snd_ac97_codec 91300 1 snd_ali5451
    ac97_bus 1952 1 snd_ac97_codec
    psmouse 35920 0
    snd_pcm_oss 37824 0
    snd_pcm 68228 3 snd_ali5451,snd_ac97_codec,snd_pcm_oss
    snd_mixer_oss 14880 1 snd_pcm_oss
    snd_seq_dummy 3780 0
    container 4736 0
    snd_seq_oss 28544 0
    snd_seq_midi 8064 0
    video 19728 0
    output 3712 1 video
    snd_rawmidi 22528 1 snd_seq_midi
    snd_seq_midi_event 6976 2 snd_seq_oss,snd_seq_midi
    snd_seq 45872 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event
    i2c_ali15x3 7492 0
    i2c_ali1535 6788 0
    wmi 7880 0
    snd_timer 21320 2 snd_pcm,snd_seq
    snd_seq_device 7564 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi ,snd_seq
    battery 8448 0
    snd 48772 12 snd_ali5451,snd_ac97_codec,snd_pcm_oss,snd_pcm,snd _mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_tim er,snd_seq_device
    ac 4448 0
    soundcore 7488 1 snd
    snd_page_alloc 9992 1 snd_pcm
    yenta_socket 24300 2
    rsrc_nonstatic 11584 1 yenta_socket
    pcmcia_core 36436 3 pcmcia,yenta_socket,rsrc_nonstatic
    ati_agp 8524 1
    shpchp 29716 0
    pci_hotplug 26980 1 shpchp
    agpgart 31720 2 drm,ati_agp
    evdev 11328 6
    ext3 120360 3
    jbd 43444 1 ext3
    mbcache 8260 1 ext3
    dm_mirror 25316 0
    dm_snapshot 17444 0
    dm_mod 55656 9 dm_mirror,dm_snapshot
    ide_disk 13952 3
    ata_generic 8004 0
    libata 142288 1 ata_generic
    scsi_mod 138508 3 sd_mod,usb_storage,libata
    dock 10448 1 libata
    ide_pci_generic 4228 0 [permanent]
    ohci_hcd 21668 0
    tg3 89316 0
    usbcore 130032 4 usb_storage,ehci_hcd,ohci_hcd
    alim15x3 10156 0 [permanent]
    ide_core 100312 3 ide_disk,ide_pci_generic,alim15x3
    thermal 19100 0
    processor 39660 3 acpi_cpufreq,thermal
    fan 5636 0
    radeonfb 96640 1
    fb_ddc 2624 1 radeonfb
    i2c_algo_bit 5892 1 radeonfb
    i2c_core 22548 5 i2c_ali15x3,i2c_ali1535,radeonfb,fb_ddc,i2c_algo_b it

    ** PCI devices:
    00:00.0 Host bridge [0600]: ATI Technologies Inc RS200/RS200M AGP Bridge [IGP 340M] [1002:cbb2] (rev 02)
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64
    Region 0: Memory at 9c000000 (32-bit, prefetchable) [size=64M]
    Region 1: Memory at 98480000 (32-bit, prefetchable) [size=4K]
    Capabilities:
    Kernel driver in use: agpgart-ati
    Kernel modules: ati-agp

    00:01.0 PCI bridge [0604]: ATI Technologies Inc PCI Bridge [IGP 340M] [1002:7010]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 99
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=66
    I/O behind bridge: 00002000-00002fff
    Memory behind bridge: 90000000-900fffff
    Prefetchable memory behind bridge: 94000000-97ffffff
    Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Kernel modules: shpchp

    00:06.0 Multimedia audio controller [0401]: ALi Corporation M5451 PCI AC-Link Controller Audio Device [10b9:5451] (rev 02)
    Subsystem: Compaq Computer Corporation Device [0e11:005a]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR+ Latency: 64 (500ns min, 6000ns max)
    Interrupt: pin A routed to IRQ 11
    Region 0: I/O ports at 3000 [size=256]
    Region 1: Memory at 98080000 (32-bit, non-prefetchable) [size=4K]
    Capabilities:
    Kernel driver in use: ALI 5451
    Kernel modules: trident, snd-ali5451

    00:07.0 ISA bridge [0601]: ALi Corporation M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] [10b9:1533]
    Subsystem: Compaq Computer Corporation Device [0e11:005a]
    Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
    Capabilities:
    Kernel modules: alim7101_wdt, alim1535_wdt

    00:08.0 Modem [0703]: ALi Corporation M5457 AC'97 Modem Controller [10b9:5457]
    Subsystem: Compaq Computer Corporation Device [0e11:005a]
    Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin A routed to IRQ 11
    Region 0: Memory at 98100000 (32-bit, non-prefetchable) [size=4K]
    Region 1: I/O ports at 3400 [size=256]
    Capabilities:

    00:0b.0 CardBus bridge [0607]: O2 Micro, Inc. OZ711M1/MC1 4-in-1 MemoryCardBus Controller [1217:7114] (rev 20)
    Subsystem: Compaq Computer Corporation Device [0e11:005a]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- Latency: 168
    Interrupt: pin A routed to IRQ 11
    Region 0: Memory at 98180000 (32-bit, non-prefetchable) [size=4K]
    Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
    Memory window 0: 20000000-23fff000 (prefetchable)
    Memory window 1: 24000000-27fff000
    I/O window 0: 00001800-000018ff
    I/O window 1: 00001c00-00001cff
    BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
    16-bit legacy interface ports at 0001
    Kernel driver in use: yenta_cardbus
    Kernel modules: yenta_socket

    00:0b.1 CardBus bridge [0607]: O2 Micro, Inc. OZ711M1/MC1 4-in-1 MemoryCardBus Controller [1217:7114] (rev 20)
    Subsystem: Compaq Computer Corporation Device [0e11:005a]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- Latency: 168
    Interrupt: pin A routed to IRQ 11
    Region 0: Memory at 98200000 (32-bit, non-prefetchable) [size=4K]
    Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
    Memory window 0: 28000000-2bfff000 (prefetchable)
    Memory window 1: 2c000000-2ffff000
    I/O window 0: 00003c00-00003cff
    I/O window 1: 00004000-000040ff
    BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
    16-bit legacy interface ports at 0001
    Kernel driver in use: yenta_cardbus
    Kernel modules: yenta_socket

    00:0b.2 System peripheral [0880]: O2 Micro, Inc. OZ711Mx 4-in-1 MemoryCardBus Accelerator [1217:7110]
    Subsystem: Compaq Computer Corporation Device [0e11:005a]
    Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- Interrupt: pin A routed to IRQ 11
    Region 0: Memory at 98280000 (32-bit, non-prefetchable) [size=4K]
    Capabilities:

    00:10.0 IDE interface [0101]: ALi Corporation M5229 IDE [10b9:5229] (rev c4) (prog-if ea)
    Subsystem: Compaq Computer Corporation Device [0e11:005a]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 (500ns min, 1000ns max)
    Interrupt: pin A routed to IRQ 10
    Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
    Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
    Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
    Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
    Region 4: I/O ports at 3800 [size=16]
    Capabilities:
    Kernel driver in use: ALI15x3_IDE
    Kernel modules: alim15x3

    00:11.0 Bridge [0680]: ALi Corporation M7101 Power Management Controller [PMU] [10b9:7101]
    Subsystem: Compaq Computer Corporation Device [0e11:005a]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Kernel driver in use: ali1535_smbus
    Kernel modules: alim7101_wdt, i2c-ali15x3, i2c-ali1535

    00:12.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10)
    Subsystem: Compaq Computer Corporation Device [0e11:005a]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 (250ns min, 10500ns max), Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 10
    Region 0: Memory at 98300000 (32-bit, non-prefetchable) [size=4K]
    Capabilities:
    Kernel driver in use: ohci_hcd
    Kernel modules: ohci-hcd

    00:12.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10)
    Subsystem: Compaq Computer Corporation Device [0e11:005a]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 (250ns min, 10500ns max), Cache Line Size: 64 bytes
    Interrupt: pin B routed to IRQ 10
    Region 0: Memory at 98380000 (32-bit, non-prefetchable) [size=4K]
    Capabilities:
    Kernel driver in use: ohci_hcd
    Kernel modules: ohci-hcd

    00:12.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20)
    Subsystem: Compaq Computer Corporation Device [0e11:005a]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 (4000ns min, 8500ns max), Cache Line Size: 64 bytes
    Interrupt: pin C routed to IRQ 10
    Region 0: Memory at 98400000 (32-bit, non-prefetchable) [size=256]
    Capabilities:
    Kernel driver in use: ehci_hcd
    Kernel modules: ehci-hcd

    00:13.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5705M Gigabit Ethernet [14e4:165d] (rev 03)
    Subsystem: Compaq Computer Corporation Device [0e11:005a]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 (16000ns min), Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 10
    Region 0: Memory at 98000000 (64-bit, non-prefetchable) [size=64K]
    [virtual] Expansion ROM at 30000000 [disabled] [size=64K]
    Capabilities:
    Kernel driver in use: tg3
    Kernel modules: tg3

    01:05.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon IGP 330M/340M/350M [1002:4337]
    Subsystem: Compaq Computer Corporation Device [0e11:005a]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 (2000ns min), Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 10
    Region 0: Memory at 94000000 (32-bit, prefetchable) [size=64M]
    Region 1: I/O ports at 2000 [size=256]
    Region 2: Memory at 90000000 (32-bit, non-prefetchable) [size=64K]
    [virtual] Expansion ROM at 90020000 [disabled] [size=128K]
    Capabilities:
    Kernel driver in use: radeonfb
    Kernel modules: radeonfb



    -- System Information:
    Debian Release: lenny/sid
    APT prefers testing
    APT policy: (990, 'testing'), (300, 'unstable'), (100, 'experimental')
    Architecture: i386 (i686)

    Kernel: Linux 2.6.25-2-686 (SMP w/1 CPU core)
    Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
    Shell: /bin/sh linked to /bin/bash

    Versions of packages linux-image-2.6.25-2-686 depends on:
    ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
    ii initramfs-tools [linux-initra 0.92b tools for generating an initramfs
    ii module-init-tools 3.4-1 tools for managing Linux kernel mo

    Versions of packages linux-image-2.6.25-2-686 recommends:
    ii libc6-i686 2.7-10 GNU C Library: Shared libraries [i

    -- debconf information excluded



    --
    To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

  2. Bug#488799: linux-image-2.6.25-2-686: power button produces multiple events

    On Tue, Jul 01, 2008 at 01:06:31PM +0200, Hramrach wrote:
    > Package: linux-image-2.6.25-2-686
    > Version: 2.6.25-5
    > Severity: normal
    >
    >
    > Pressing the power button produces two acpi events most of the time.
    > This makes using the event for something like hibernate quite difficult.
    >
    > I do not see any particular pattern in the behaviour. Pressing the
    > power button usually produces two events but sometimes only one is
    > produced.


    please try out 2.6.26-rc8 trunk linux image
    see apt lines -> http://wiki.debian.org/DebianKernel

    thanks for feedback

    --
    maks



    --
    To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

  3. Bug#488799: linux-image-2.6.25-2-686: power button produces multiple events


    On Jul 1, 2008, at 2:17 PM, maximilian attems wrote:

    > On Tue, Jul 01, 2008 at 01:06:31PM +0200, Hramrach wrote:
    >> Package: linux-image-2.6.25-2-686
    >> Version: 2.6.25-5
    >> Severity: normal
    >>
    >>
    >> Pressing the power button produces two acpi events most of the time.
    >> This makes using the event for something like hibernate quite
    >> difficult.
    >>
    >> I do not see any particular pattern in the behaviour. Pressing the
    >> power button usually produces two events but sometimes only one is
    >> produced.

    >
    > please try out 2.6.26-rc8 trunk linux image
    > see apt lines -> http://wiki.debian.org/DebianKernel
    >
    >

    2.6.25-6 produces one event most of the time, 2.6.26-rc8 produces two
    events always for me.

    Thanks

    Michal






    --
    To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

  4. Bug#488799: linux-image-2.6.25-2-686: power button produces multiple events

    On Wed, Jul 02, 2008 at 11:55:44AM +0200, Michal Suchanek wrote:
    >
    > On Jul 1, 2008, at 2:17 PM, maximilian attems wrote:
    >
    > >On Tue, Jul 01, 2008 at 01:06:31PM +0200, Hramrach wrote:
    > >>Package: linux-image-2.6.25-2-686
    > >>Version: 2.6.25-5
    > >>Severity: normal
    > >>
    > >>
    > >>Pressing the power button produces two acpi events most of the time.
    > >>This makes using the event for something like hibernate quite
    > >>difficult.
    > >>
    > >>I do not see any particular pattern in the behaviour. Pressing the
    > >>power button usually produces two events but sometimes only one is
    > >>produced.

    > >
    > >please try out 2.6.26-rc8 trunk linux image
    > >see apt lines -> http://wiki.debian.org/DebianKernel
    > >
    > >

    > 2.6.25-6 produces one event most of the time, 2.6.26-rc8 produces two
    > events always for me.


    if you consider it a bug please report upstream on bugzilla.kernel.org
    and let us know the bug number.

    thanks

    --
    maks



    --
    To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

  5. Bug#488799: linux-image-2.6.25-2-686: power button produces multiple events


    On Jul 2, 2008, at 12:09 PM, maximilian attems wrote:
    >
    > if you consider it a bug please report upstream on bugzilla.kernel.org
    > and let us know the bug number.
    >


    http://bugzilla.kernel.org/show_bug.cgi?id=11022

    MS






    --
    To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

+ Reply to Thread