Bug#481433: Installation report: minor partitioning display bug, otherwise fine (Daily i386 netboot build, 13-May-2008) - Debian

This is a discussion on Bug#481433: Installation report: minor partitioning display bug, otherwise fine (Daily i386 netboot build, 13-May-2008) - Debian ; Package: installation-reports Boot method: Network boot (PXE) Image version: http://people.debian.org/~joeyh/d-i/...netboot.tar.gz (Daily i386 netboot build, 13-May-2008) Date: 2008-05-13 7:30 PM US/Eastern time Machine: Generic w/ Intel SE7500CW2 motherboard Processor: Intel 2.00 GHz Xeon (Prestonia) Memory: 1024 MB Partitions: Filesystem Type 1K-blocks ...

+ Reply to Thread
Results 1 to 4 of 4

Thread: Bug#481433: Installation report: minor partitioning display bug, otherwise fine (Daily i386 netboot build, 13-May-2008)

  1. Bug#481433: Installation report: minor partitioning display bug, otherwise fine (Daily i386 netboot build, 13-May-2008)

    Package: installation-reports

    Boot method: Network boot (PXE)
    Image version: http://people.debian.org/~joeyh/d-i/...netboot.tar.gz
    (Daily i386 netboot build, 13-May-2008)
    Date: 2008-05-13 7:30 PM US/Eastern time

    Machine: Generic w/ Intel SE7500CW2 motherboard
    Processor: Intel 2.00 GHz Xeon (Prestonia)
    Memory: 1024 MB

    Partitions:
    Filesystem Type 1K-blocks Used Available Use% Mounted on
    /dev/hda1 ext3 7692876 685724 6616376 10% /
    tmpfs tmpfs 517872 0 517872 0% /lib/init/rw
    udev tmpfs 10240 76 10164 1% /dev
    tmpfs tmpfs 517872 0 517872 0% /dev/shm


    Output of lspci -nn and lspci -vnn:

    lspci -nn:
    00:00.0 Host bridge [0600]: Intel Corporation E7500 Memory Controller
    Hub [8086:2540] (rev 03)
    00:00.1 Class [ff00]: Intel Corporation E7500/E7501 Host RASUM
    Controller [8086:2541] (rev 03)
    00:02.0 PCI bridge [0604]: Intel Corporation E7500/E7501 Hub Interface
    B PCI-to-PCI Bridge [8086:2543] (rev 03)
    00:1d.0 USB Controller [0c03]: Intel Corporation 82801CA/CAM USB
    Controller #1 [8086:2482] (rev 02)
    00:1d.1 USB Controller [0c03]: Intel Corporation 82801CA/CAM USB
    Controller #2 [8086:2484] (rev 02)
    00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
    [8086:244e] (rev 42)
    00:1f.0 ISA bridge [0601]: Intel Corporation 82801CA LPC Interface
    Controller [8086:2480] (rev 02)
    00:1f.1 IDE interface [0101]: Intel Corporation 82801CA Ultra ATA
    Storage Controller [8086:248b] (rev 02)
    00:1f.3 SMBus [0c05]: Intel Corporation 82801CA/CAM SMBus Controller
    [8086:2483] (rev 02)
    01:1c.0 PIC [0800]: Intel Corporation 82870P2 P64H2 I/OxAPIC
    [8086:1461] (rev 03)
    01:1d.0 PCI bridge [0604]: Intel Corporation 82870P2 P64H2 Hub PCI
    Bridge [8086:1460] (rev 03)
    01:1e.0 PIC [0800]: Intel Corporation 82870P2 P64H2 I/OxAPIC
    [8086:1461] (rev 03)
    01:1f.0 PCI bridge [0604]: Intel Corporation 82870P2 P64H2 Hub PCI
    Bridge [8086:1460] (rev 03)
    04:03.0 VGA compatible controller [0300]: ATI Technologies Inc Rage XL
    [1002:4752] (rev 27)
    04:04.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1
    Ethernet Pro 100 [8086:1229] (rev 0d)
    04:05.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1
    Ethernet Pro 100 [8086:1229] (rev 0d)


    lspci -vnn:
    00:00.0 Host bridge [0600]: Intel Corporation E7500 Memory Controller
    Hub [8086:2540] (rev 03)
    Flags: bus master, fast devsel, latency 0
    Kernel driver in use: e7xxx_edac
    Kernel modules: e7xxx_edac

    00:00.1 Class [ff00]: Intel Corporation E7500/E7501 Host RASUM
    Controller [8086:2541] (rev 03)
    Subsystem: Intel Corporation Device [8086:3419]
    Flags: fast devsel

    00:02.0 PCI bridge [0604]: Intel Corporation E7500/E7501 Hub Interface
    B PCI-to-PCI Bridge [8086:2543] (rev 03)
    Flags: bus master, 66MHz, fast devsel, latency 64
    Bus: primary=00, secondary=01, subordinate=03, sec-latency=0
    Memory behind bridge: fc100000-fc1fffff
    Kernel modules: shpchp

    00:1d.0 USB Controller [0c03]: Intel Corporation 82801CA/CAM USB
    Controller #1 [8086:2482] (rev 02)
    Subsystem: Intel Corporation Device [8086:3419]
    Flags: bus master, medium devsel, latency 0, IRQ 16
    I/O ports at 7000 [size=32]
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci-hcd

    00:1d.1 USB Controller [0c03]: Intel Corporation 82801CA/CAM USB
    Controller #2 [8086:2484] (rev 02)
    Subsystem: Intel Corporation Device [8086:3419]
    Flags: bus master, medium devsel, latency 0, IRQ 17
    I/O ports at 7020 [size=32]
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci-hcd

    00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
    [8086:244e] (rev 42)
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
    I/O behind bridge: 00008000-00008fff
    Memory behind bridge: fc200000-fdffffff
    Kernel modules: shpchp

    00:1f.0 ISA bridge [0601]: Intel Corporation 82801CA LPC Interface
    Controller [8086:2480] (rev 02)
    Flags: bus master, medium devsel, latency 0
    Kernel modules: intel-rng, iTCO_wdt

    00:1f.1 IDE interface [0101]: Intel Corporation 82801CA Ultra ATA
    Storage Controller [8086:248b] (rev 02) (prog-if 8a [Master SecP
    PriP])
    Subsystem: Intel Corporation Device [8086:3419]
    Flags: bus master, medium devsel, latency 0, IRQ 20
    I/O ports at 01f0 [size=8]
    I/O ports at 03f4 [size=1]
    I/O ports at 0170 [size=8]
    I/O ports at 0374 [size=1]
    I/O ports at 7040 [size=16]
    Memory at 50000000 (32-bit, non-prefetchable) [size=1K]
    Kernel driver in use: PIIX_IDE
    Kernel modules: piix

    00:1f.3 SMBus [0c05]: Intel Corporation 82801CA/CAM SMBus Controller
    [8086:2483] (rev 02)
    Subsystem: Intel Corporation Device [8086:3419]
    Flags: medium devsel, IRQ 21
    I/O ports at 7060 [size=32]
    Kernel driver in use: i801_smbus
    Kernel modules: i2c-i801

    01:1c.0 PIC [0800]: Intel Corporation 82870P2 P64H2 I/OxAPIC
    [8086:1461] (rev 03) (prog-if 20)
    Subsystem: Intel Corporation Device [8086:3419]
    Flags: bus master, 66MHz, fast devsel, latency 0
    Memory at fc100000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [50] PCI-X non-bridge device

    01:1d.0 PCI bridge [0604]: Intel Corporation 82870P2 P64H2 Hub PCI
    Bridge [8086:1460] (rev 03)
    Flags: bus master, 66MHz, fast devsel, latency 64
    Bus: primary=01, secondary=02, subordinate=02, sec-latency=64
    Capabilities: [50] PCI-X bridge device
    Kernel modules: shpchp

    01:1e.0 PIC [0800]: Intel Corporation 82870P2 P64H2 I/OxAPIC
    [8086:1461] (rev 03) (prog-if 20)
    Subsystem: Intel Corporation Device [8086:3419]
    Flags: bus master, 66MHz, fast devsel, latency 0
    Memory at fc101000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [50] PCI-X non-bridge device

    01:1f.0 PCI bridge [0604]: Intel Corporation 82870P2 P64H2 Hub PCI
    Bridge [8086:1460] (rev 03)
    Flags: bus master, 66MHz, fast devsel, latency 64
    Bus: primary=01, secondary=03, subordinate=03, sec-latency=64
    Capabilities: [50] PCI-X bridge device
    Kernel modules: shpchp

    04:03.0 VGA compatible controller [0300]: ATI Technologies Inc Rage XL
    [1002:4752] (rev 27)
    Subsystem: Intel Corporation Device [8086:3419]
    Flags: bus master, stepping, medium devsel, latency 66, IRQ 11
    Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
    I/O ports at 8000 [size=256]
    Memory at fc240000 (32-bit, non-prefetchable) [size=4K]
    [virtual] Expansion ROM at fc260000 [disabled] [size=128K]
    Capabilities: [5c] Power Management version 2

    04:04.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1
    Ethernet Pro 100 [8086:1229] (rev 0d)
    Subsystem: Intel Corporation Device [8086:3419]
    Flags: bus master, medium devsel, latency 66, IRQ 18
    Memory at fc241000 (32-bit, non-prefetchable) [size=4K]
    I/O ports at 8400 [size=64]
    Memory at fc200000 (32-bit, non-prefetchable) [size=128K]
    Capabilities: [dc] Power Management version 2
    Kernel driver in use: e100
    Kernel modules: e100, eepro100

    04:05.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1
    Ethernet Pro 100 [8086:1229] (rev 0d)
    Subsystem: Intel Corporation Device [8086:3419]
    Flags: bus master, medium devsel, latency 66, IRQ 19
    Memory at fc242000 (32-bit, non-prefetchable) [size=4K]
    I/O ports at 8440 [size=64]
    Memory at fc220000 (32-bit, non-prefetchable) [size=128K]
    Capabilities: [dc] Power Management version 2
    Kernel driver in use: e100
    Kernel modules: e100, eepro100



    Base System Installation Checklist:
    [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

    Initial boot: [O]
    Detect network card: [O]
    Configure network: [O]
    Detect CD: [O]
    Load installer modules: [O]
    Detect hard drives: [O]
    Partition hard drives: [E]
    Install base system: [O]
    Clock/timezone setup: [O]
    User/password setup: [O]
    Install tasks: [O]
    Install boot loader: [O]
    Overall install: [O]

    Comments/Problems:

    The hard drives in the system are two Segate ST360015As, but they are
    connected through an Arco DupliDisk II.

    When partitioning, I set everything up and the screen looked like this
    (no problems):
    IDE1 master (hda) - 60.0 GB ST360015A
    #1 primary 8.0 GB B f ext3 /
    #2 primary 510.0 MB f swap swap
    pri/log 51.5 GB FREE SPACE

    However, when I continued on and the screen came up afterwards to
    confirm it looked like the following:
    The partition tables of the following devices are changed:
    IDE1 master (hda)

    The following partitions are going to be formatted:
    partition #1 of IDE1 master (hda) as ext3
    partition #1 of IDE1 master (hda) as swap


    It has both of the partitions listed as #1, when obviously that isn't
    right. Even the previous initial setup screen had them listed as #1
    and #2. This is only a minor display issue; my install was completely
    successful.

    Thanks for your time,

    Johnathan Mayo



    --
    To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

  2. Bug#481433: Installation report: minor partitioning display bug, otherwise fine (Daily i386 netboot build, 13-May-2008)

    reassign 481433 partman-base 117
    retitle 481433 wrong partition numbering when confirming changes
    severity 481433 minor
    tag 481433 patch
    thanks

    On Thu, May 15, 2008 at 08:05:16PM -0400, Johnathan Mayo wrote:
    > However, when I continued on and the screen came up afterwards to
    > confirm it looked like the following:
    > The partition tables of the following devices are changed:
    > IDE1 master (hda)
    >
    > The following partitions are going to be formatted:
    > partition #1 of IDE1 master (hda) as ext3
    > partition #1 of IDE1 master (hda) as swap


    Well spotted!

    The bug has been introduced while adding support for multipath devices.
    I have just commited a fix for this issue.

    Cheers,
    --
    Jérémy Bobbio .''`.
    lunar@debian.org : :Ⓐ : # apt-get install anarchism
    `. `'`
    `-

    -----BEGIN PGP SIGNATURE-----
    Version: GnuPG v1.4.6 (GNU/Linux)

    iD8DBQFIOJmh2PUjs9fQ72URApyDAJ0WVUNIYr1ofNM52ba14W jiCSOmQACcDbt6
    o2LJGAZivlhROpUNeSPO1W0=
    =b+gb
    -----END PGP SIGNATURE-----


  3. Processed: Re: Bug#481433: Installation report: minor partitioning display bug, otherwise fine (Daily i386 netboot build, 13-May-2008)

    Processing commands for control@bugs.debian.org:

    > reassign 481433 partman-base 117

    Bug#481433: Installation report: minor partitioning display bug, otherwise fine (Daily i386 netboot build, 13-May-2008)
    Bug reassigned from package `installation-reports' to `partman-base'.

    > retitle 481433 wrong partition numbering when confirming changes

    Bug#481433: Installation report: minor partitioning display bug, otherwise fine (Daily i386 netboot build, 13-May-2008)
    Changed Bug title to `wrong partition numbering when confirming changes' from `Installation report: minor partitioning display bug, otherwise fine (Daily i386 netboot build, 13-May-2008)'.

    > severity 481433 minor

    Bug#481433: wrong partition numbering when confirming changes
    Severity set to `minor' from `normal'

    > tag 481433 patch

    Bug#481433: wrong partition numbering when confirming changes
    There were no tags set.
    Tags added: patch

    > thanks

    Stopping processing here.

    Please contact me if you need assistance.

    Debian bug tracking system administrator
    (administrator, Debian Bugs database)


    --
    To UNSUBSCRIBE, email to debian-boot-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

  4. Bug#481433: marked as done (wrong partition numbering when confirming changes)


    Your message dated Mon, 26 May 2008 11:17:03 +0000
    with message-id
    and subject line Bug#481433: fixed in partman-base 120
    has caused the Debian Bug report #481433,
    regarding wrong partition numbering when confirming changes
    to be marked as done.

    This means that you claim that the problem has been dealt with.
    If this is not the case it is now your responsibility to reopen the
    Bug report if necessary, and/or fix the problem forthwith.

    (NB: If you are a system administrator and have no idea what this
    message is talking about, this may indicate a serious mail system
    misconfiguration somewhere. Please contact owner@bugs.debian.org
    immediately.)


    --
    481433: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=481433
    Debian Bug Tracking System
    Contact owner@bugs.debian.org with problems


+ Reply to Thread