Bug#481130: linux-image-2.6.24-1-686: hwclock fails to carry out select() calls on /dev/rtc after update from 2.6.22 to 2.6.24 - Debian

This is a discussion on Bug#481130: linux-image-2.6.24-1-686: hwclock fails to carry out select() calls on /dev/rtc after update from 2.6.22 to 2.6.24 - Debian ; Package: linux-image-2.6.24-1-686 Version: 2.6.24-6 Severity: important the system clock is no more set correctly at boot time after I upgraded the kernel from 2.6.22 to 2.6.24. This might be due to the hwclock commands which becomes unable to perform I/O ...

+ Reply to Thread
Results 1 to 2 of 2

Thread: Bug#481130: linux-image-2.6.24-1-686: hwclock fails to carry out select() calls on /dev/rtc after update from 2.6.22 to 2.6.24

  1. Bug#481130: linux-image-2.6.24-1-686: hwclock fails to carry out select() calls on /dev/rtc after update from 2.6.22 to 2.6.24

    Package: linux-image-2.6.24-1-686
    Version: 2.6.24-6
    Severity: important



    the system clock is no more set correctly at boot time after
    I upgraded the kernel from 2.6.22 to 2.6.24. This might be due to the
    hwclock commands which becomes unable to perform I/O operations on
    /dev/rtc

    # hwclock
    select() to /dev/rtc to wait for clock tick timed out

    the time lag between right and wrong times suggests that the
    timezone is not being taken into account (the hardware clock
    follows the local time, being the machine a dual Debian/Windows
    Asus V6800V machine)

    rebooting the machine with a 2.6.22 kernel restores the correct
    behavior

    regards

    -- Massimo

    -- Package-specific info:
    ** Version:
    Linux version 2.6.24-1-686 (Debian 2.6.24-6) (waldi@debian.org) (gcc version 4.1.3 20080308 (prerelease) (Debian 4.1.2-21)) #1 SMP Sat Apr 19 00:37:55 UTC 2008

    ** Command line:
    root=/dev/hda3 ro vga=771

    ** Not tainted

    ** Kernel log:
    usb 4-1: configuration #1 chosen from 1 choice
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci: SDHCI controller found at 0000:03:01.2 [1180:0822] (rev 17)
    ACPI: PCI Interrupt 0000:03:01.2[C] -> GSI 18 (level, low) -> IRQ 21
    sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
    mmc0: SDHCI at 0xfbffb400 irq 21 DMA
    ieee80211_crypt: registered algorithm 'NULL'
    ieee80211: 802.11 data/management/control stack, git-1.1.13
    ieee80211: Copyright (C) 2004-2005 Intel Corporation
    ACPI: AC Adapter [AC0] (off-line)
    ACPI: Battery Slot [BAT0] (battery present)
    input: Video Bus as /class/input/input7
    ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
    ipw2200: Copyright(c) 2003-2006 Intel Corporation
    ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 17 (level, low) -> IRQ 17
    ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
    Bluetooth: Core ver 2.11
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
    ipw2200: Unable to load firmware: -2
    ipw2200: failed to register network device
    ACPI: PCI interrupt for device 0000:03:02.0 disabled
    ipw2200: probe of 0000:03:02.0 failed with error -5
    ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1e.3 to 64
    Bluetooth: HCI USB driver ver 2.9
    usbcore: registered new interface driver hci_usb
    cs: IO port probe 0x100-0x4ff: clean.
    cs: IO port probe 0x800-0x8ff: clean.
    cs: IO port probe 0xc00-0xcff: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    MC'97 1 converters and GPIO not ready (0xff00)
    ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:1e.2 to 64
    intel8x0_measure_ac97_clock: measured 55502 usecs
    intel8x0: clocking to 48000
    Adding 1951856k swap on /dev/hda5. Priority:-1 extents:1 across:1951856k
    EXT3 FS on hda3, internal journal
    Probing IDE interface ide1...
    Driver 'sr' needs updating - please use bus_type methods
    device-mapper: uevent: version 1.0.3
    device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
    ReiserFS: hda9: found reiserfs format "3.6" with standard journal
    ReiserFS: hda9: using ordered data mode
    ReiserFS: hda9: journal params: device hda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: hda9: checking transaction log (hda9)
    ReiserFS: hda9: Using r5 hash to sort names
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on hda6, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on hda8, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on hda7, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    lp: driver loaded but no devices found
    ppdev: user-space parallel port driver
    Bluetooth: L2CAP ver 2.9
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: RFCOMM socket layer initialized
    Bluetooth: RFCOMM TTY layer initialized
    Bluetooth: RFCOMM ver 1.8
    hdb: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
    hdb: drive_cmd: error=0x04 { AbortedCommand }
    ide: failed opcode was: 0xef
    [drm] Initialized drm 1.1.0 20060810
    ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:01:00.0 to 64
    [drm] Initialized radeon 1.28.0 20060524 on minor 0
    [drm] Setting GART location based on new memory map
    [drm] Loading R300 Microcode
    [drm] writeback test succeeded in 1 usecs
    NET: Registered protocol family 4
    NET: Registered protocol family 3
    NET: Registered protocol family 5
    ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
    ipw2200: Copyright(c) 2003-2006 Intel Corporation
    ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 17 (level, low) -> IRQ 17
    ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
    ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
    udev: renamed network interface eth1 to eth2
    eth2: no IPv6 routers present
    skge eth0: enabling interface
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    ACPI: PCI interrupt for device 0000:03:02.0 disabled
    ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
    ipw2200: Copyright(c) 2003-2006 Intel Corporation
    ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 17 (level, low) -> IRQ 17
    ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
    ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
    udev: renamed network interface eth1 to eth2
    ieee80211_crypt: registered algorithm 'WEP'
    eth2: no IPv6 routers present

    ** Loaded modules:
    Module Size Used by
    arc4 2016 2
    ecb 3552 2
    blkcipher 6724 1 ecb
    ieee80211_crypt_wep 5248 1
    ipw2200 134568 0
    appletalk 33408 2
    ax25 49872 2
    ipx 25892 2
    p8023 2112 1 ipx
    radeon 112096 2
    drm 74132 3 radeon
    rfcomm 36784 4
    l2cap 22880 9 rfcomm
    ppdev 8804 0
    parport_pc 33668 0
    lp 11076 0
    parport 34280 3 ppdev,parport_pc,lp
    ipv6 240836 23
    reiserfs 210976 1
    dm_snapshot 16964 0
    dm_mirror 21600 0
    dm_mod 55812 2 dm_snapshot,dm_mirror
    sr_mod 16708 0
    firewire_sbp2 14252 0
    ide_generic 1280 0 [permanent]
    hci_usb 14780 2
    bluetooth 53636 7 rfcomm,l2cap,hci_usb
    pcmcia 37036 0
    joydev 11360 0
    snd_intel8x0 32028 5
    snd_intel8x0m 16844 1
    snd_ac97_codec 92932 2 snd_intel8x0,snd_intel8x0m
    ac97_bus 2176 1 snd_ac97_codec
    snd_pcm_oss 38272 0
    snd_pcm 71780 6 snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm_ oss
    snd_mixer_oss 15296 1 snd_pcm_oss
    snd_seq_dummy 3780 0
    video 18672 0
    output 3744 1 video
    battery 13572 0
    ac 6116 0
    ieee80211 31048 1 ipw2200
    ieee80211_crypt 5888 2 ieee80211_crypt_wep,ieee80211
    sdhci 16836 0
    firmware_class 9312 2 ipw2200,pcmcia
    snd_seq_oss 29472 0
    mmc_core 47300 1 sdhci
    yenta_socket 24844 1
    rsrc_nonstatic 11872 1 yenta_socket
    pcmcia_core 36884 3 pcmcia,yenta_socket,rsrc_nonstatic
    snd_seq_midi 8160 0
    snd_rawmidi 22624 1 snd_seq_midi
    snd_seq_midi_event 6976 2 snd_seq_oss,snd_seq_midi
    asus_laptop 17432 0
    snd_seq 46544 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event
    led_class 5156 1 asus_laptop
    snd_timer 21092 4 snd_pcm,snd_seq
    snd_seq_device 7820 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi ,snd_seq
    button 8432 0
    i2c_i801 9232 0
    intel_agp 23412 0
    psmouse 36464 0
    irda 174236 0
    i2c_core 22432 1 i2c_i801
    agpgart 31688 2 drm,intel_agp
    snd 48612 19 snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm_ oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi, snd_seq,snd_timer,snd_seq_device
    soundcore 7552 1 snd
    serio_raw 6660 0
    evdev 11104 7
    iTCO_wdt 11268 0
    crc_ccitt 2176 1 irda
    snd_page_alloc 10056 3 snd_intel8x0,snd_intel8x0m,snd_pcm
    pcspkr 3200 0
    rtc 13052 0
    ext3 122888 4
    jbd 43732 1 ext3
    mbcache 8288 1 ext3
    ide_cd 36224 1
    cdrom 32512 2 sr_mod,ide_cd
    ide_disk 15648 7
    ata_generic 7428 0
    libata 144464 1 ata_generic
    scsi_mod 141164 3 sr_mod,firewire_sbp2,libata
    piix 7492 0 [permanent]
    generic 4388 0 [permanent]
    ide_core 108292 5 ide_generic,ide_cd,ide_disk,piix,generic
    firewire_ohci 17760 0
    firewire_core 39232 2 firewire_sbp2,firewire_ohci
    crc_itu_t 2176 1 firewire_core
    skge 39184 0
    ehci_hcd 32524 0
    uhci_hcd 23376 0
    usbcore 132940 4 hci_usb,ehci_hcd,uhci_hcd
    thermal 16028 0
    processor 36520 2 thermal
    fan 4772 0

    ** PCI devices:
    00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03)
    Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1882]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0
    Capabilities:
    Kernel modules: intel-agp

    00:01.0 PCI bridge [0604]: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port [8086:2591] (rev 03) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 16 bytes
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 0000b000-0000bfff
    Memory behind bridge: f0000000-fbefffff
    Prefetchable memory behind bridge: d0000000-deffffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities:
    Kernel driver in use: pcieport-driver
    Kernel modules: shpchp

    00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 04) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 16 bytes
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    I/O behind bridge: 0000c000-0000cfff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities:
    Kernel driver in use: pcieport-driver
    Kernel modules: shpchp

    00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 04) (prog-if 00 [UHCI])
    Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1967]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
    Interrupt: pin A routed to IRQ 19
    Region 4: I/O ports at 9800 [size=32]
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci-hcd

    00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 04) (prog-if 00 [UHCI])
    Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1967]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
    Interrupt: pin B routed to IRQ 20
    Region 4: I/O ports at a000 [size=32]
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci-hcd

    00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 04) (prog-if 00 [UHCI])
    Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1967]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
    Interrupt: pin C routed to IRQ 21
    Region 4: I/O ports at a400 [size=32]
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci-hcd

    00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 04) (prog-if 00 [UHCI])
    Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1967]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
    Interrupt: pin D routed to IRQ 16
    Region 4: I/O ports at a800 [size=32]
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci-hcd

    00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 04) (prog-if 20 [EHCI])
    Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1967]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
    Interrupt: pin A routed to IRQ 19
    Region 0: Memory at dffffc00 (32-bit, non-prefetchable) [size=1K]
    Capabilities:
    Kernel driver in use: ehci_hcd
    Kernel modules: ehci-hcd

    00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d4) (prog-if 01 [Subtractive decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0
    Bus: primary=00, secondary=03, subordinate=07, sec-latency=32
    I/O behind bridge: 0000d000-0000efff
    Memory behind bridge: fbf00000-fbffffff
    Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities:

    00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e] (rev 04)
    Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1915]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
    Interrupt: pin A routed to IRQ 17
    Region 0: I/O ports at 8800 [size=256]
    Region 1: I/O ports at 8400 [size=64]
    Region 2: Memory at dffff800 (32-bit, non-prefetchable) [size=512]
    Region 3: Memory at dffff400 (32-bit, non-prefetchable) [size=256]
    Capabilities:
    Kernel driver in use: Intel ICH
    Kernel modules: snd-intel8x0

    00:1e.3 Modem [0703]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller [8086:266d] (rev 04) (prog-if 00 [Generic])
    Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1886]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
    Interrupt: pin B routed to IRQ 18
    Region 0: I/O ports at 9400 [size=256]
    Region 1: I/O ports at 9000 [size=128]
    Capabilities:
    Kernel driver in use: Intel ICH Modem
    Kernel modules: snd-intel8x0m

    00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 04)
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
    Kernel modules: intel-rng, iTCO_wdt

    00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 04) (prog-if 8a [Master SecP PriP])
    Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1967]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
    Interrupt: pin A routed to IRQ 21
    Region 0: I/O ports at 01f0 [size=8]
    Region 1: I/O ports at 03f4 [size=1]
    Region 2: I/O ports at 0170 [size=8]
    Region 3: I/O ports at 0374 [size=1]
    Region 4: I/O ports at ffa0 [size=16]
    Kernel driver in use: PIIX_IDE
    Kernel modules: piix

    00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 04)
    Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1967]
    Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin B routed to IRQ 20
    Region 4: I/O ports at 0400 [size=32]
    Kernel driver in use: i801_smbus
    Kernel modules: i2c-i801

    01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M24 1P [Radeon Mobility X600] [1002:3150] (prog-if 00 [VGA controller])
    Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1881]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 16 bytes
    Interrupt: pin A routed to IRQ 16
    Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
    Region 1: I/O ports at b000 [size=256]
    Region 2: Memory at f0000000 (32-bit, non-prefetchable) [size=64K]
    Expansion ROM at fbee0000 [disabled] [size=128K]
    Capabilities:
    Kernel modules: radeonfb

    03:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13)
    Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus) [1043:173c]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 16 bytes
    Interrupt: pin A routed to IRQ 21
    Region 0: Memory at fbffc000 (32-bit, non-prefetchable) [size=16K]
    Region 1: I/O ports at d800 [size=256]
    Expansion ROM at fbf00000 [disabled] [size=128K]
    Capabilities:
    Kernel driver in use: skge
    Kernel modules: skge

    03:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b3)
    Subsystem: ASUSTeK Computer Inc. V6800V [1043:1967]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 168
    Interrupt: pin A routed to IRQ 17
    Region 0: Memory at fbf20000 (32-bit, non-prefetchable) [size=4K]
    Bus: primary=03, secondary=04, subordinate=07, sec-latency=176
    Memory window 0: 50000000-53fff000 (prefetchable)
    Memory window 1: 54000000-57fff000
    I/O window 0: 0000d000-0000d0ff
    I/O window 1: 0000d400-0000d4ff
    BridgeCtl: Parity+ SERR+ ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
    16-bit legacy interface ports at 0001
    Kernel driver in use: yenta_cardbus
    Kernel modules: yenta_socket

    03:01.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (rev 08) (prog-if 10 [OHCI])
    Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1967]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 (500ns min, 1000ns max)
    Interrupt: pin B routed to IRQ 16
    Region 0: Memory at fbffa800 (32-bit, non-prefetchable) [size=2K]
    Capabilities:
    Kernel driver in use: firewire_ohci
    Kernel modules: firewire-ohci

    03:01.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 17)
    Subsystem: ASUSTeK Computer Inc. ASUS V6800V [1043:1967]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64
    Interrupt: pin C routed to IRQ 21
    Region 0: Memory at fbffb400 (32-bit, non-prefetchable) [size=256]
    Capabilities:
    Kernel driver in use: sdhci
    Kernel modules: sdhci

    03:01.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 08)
    Subsystem: ASUSTeK Computer Inc. V6800V [1043:1967]
    Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin C routed to IRQ 5
    Region 0: Memory at fbffb800 (32-bit, non-prefetchable) [size=256]
    Capabilities:

    03:01.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 03)
    Subsystem: ASUSTeK Computer Inc. V6800V [1043:1967]
    Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin C routed to IRQ 5
    Region 0: Memory at fbffbc00 (32-bit, non-prefetchable) [size=256]
    Capabilities:

    03:02.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG Network Connection [8086:4220] (rev 05)
    Subsystem: Intel Corporation Unknown device [8086:2701]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 (750ns min, 6000ns max)
    Interrupt: pin A routed to IRQ 17
    Region 0: Memory at fbff9000 (32-bit, non-prefetchable) [size=4K]
    Capabilities:
    Kernel driver in use: ipw2200
    Kernel modules: ipw2200



    -- System Information:
    Debian Release: lenny/sid
    APT prefers testing
    APT policy: (500, 'testing')
    Architecture: i386 (i686)

    Kernel: Linux 2.6.24-1-686 (SMP w/1 CPU core)
    Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
    Shell: /bin/sh linked to /bin/bash

    Versions of packages linux-image-2.6.24-1-686 depends on:
    ii debconf [debconf-2.0] 1.5.21 Debian configuration management sy
    ii initramfs-tools [linux-initra 0.92a tools for generating an initramfs
    ii module-init-tools 3.4-1 tools for managing Linux kernel mo

    Versions of packages linux-image-2.6.24-1-686 recommends:
    ii libc6-i686 2.7-10 GNU C Library: Shared libraries [i

    -- debconf information:
    linux-image-2.6.24-1-686/preinst/overwriting-modules-2.6.24-1-686: true
    linux-image-2.6.24-1-686/postinst/bootloader-error-2.6.24-1-686:
    linux-image-2.6.24-1-686/postinst/create-kimage-link-2.6.24-1-686: true
    linux-image-2.6.24-1-686/prerm/would-invalidate-boot-loader-2.6.24-1-686: true
    linux-image-2.6.24-1-686/preinst/initrd-2.6.24-1-686:
    linux-image-2.6.24-1-686/preinst/lilo-has-ramdisk:
    linux-image-2.6.24-1-686/preinst/abort-install-2.6.24-1-686:
    linux-image-2.6.24-1-686/prerm/removing-running-kernel-2.6.24-1-686: true
    linux-image-2.6.24-1-686/preinst/abort-overwrite-2.6.24-1-686:
    linux-image-2.6.24-1-686/postinst/bootloader-test-error-2.6.24-1-686:
    linux-image-2.6.24-1-686/preinst/lilo-initrd-2.6.24-1-686: true
    shared/kernel-image/really-run-bootloader: true
    linux-image-2.6.24-1-686/postinst/old-system-map-link-2.6.24-1-686: true
    linux-image-2.6.24-1-686/preinst/failed-to-move-modules-2.6.24-1-686:
    linux-image-2.6.24-1-686/postinst/depmod-error-initrd-2.6.24-1-686: false
    linux-image-2.6.24-1-686/preinst/bootloader-initrd-2.6.24-1-686: true
    linux-image-2.6.24-1-686/postinst/old-initrd-link-2.6.24-1-686: true
    linux-image-2.6.24-1-686/postinst/old-dir-initrd-link-2.6.24-1-686: true
    linux-image-2.6.24-1-686/postinst/depmod-error-2.6.24-1-686: false
    linux-image-2.6.24-1-686/preinst/elilo-initrd-2.6.24-1-686: true
    linux-image-2.6.24-1-686/postinst/kimage-is-a-directory:



    --
    To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

  2. Bug#481130: marked as done (linux-image-2.6.24-1-686: hwclock fails to carry out select() calls on /dev/rtc after update from 2.6.22 to 2.6.24)


    Your message dated Wed, 14 May 2008 01:08:41 +0200
    with message-id <20080513230841.GX27599@baikonur.stro.at>
    and subject line Re: Bug#481130: linux-image-2.6.24-1-686: hwclock fails tocarry out select() calls on /dev/rtc after update from 2.6.22 to 2.6.24
    has caused the Debian Bug report #481130,
    regarding linux-image-2.6.24-1-686: hwclock fails to carry out select() calls on /dev/rtc after update from 2.6.22 to 2.6.24
    to be marked as done.

    This means that you claim that the problem has been dealt with.
    If this is not the case it is now your responsibility to reopen the
    Bug report if necessary, and/or fix the problem forthwith.

    (NB: If you are a system administrator and have no idea what this
    message is talking about, this may indicate a serious mail system
    misconfiguration somewhere. Please contact owner@bugs.debian.org
    immediately.)


    --
    481130: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=481130
    Debian Bug Tracking System
    Contact owner@bugs.debian.org with problems


+ Reply to Thread