Bug#479381: linux-image-2.6.25-1-686: Booting pauses for about 30 seconds on Acer Aspire 5710Z - Debian

This is a discussion on Bug#479381: linux-image-2.6.25-1-686: Booting pauses for about 30 seconds on Acer Aspire 5710Z - Debian ; Package: linux-image-2.6.25-1-686 Version: 2.6.25-1 Severity: normal Since version 2.6.24 booting the Debian kernel is quite slow because it pauses for about 30 seconds. It always happens after those lines in the booting process: [ 9.990058] iTCO_wdt: Found a ICH7-M TCO ...

+ Reply to Thread
Results 1 to 7 of 7

Thread: Bug#479381: linux-image-2.6.25-1-686: Booting pauses for about 30 seconds on Acer Aspire 5710Z

  1. Bug#479381: linux-image-2.6.25-1-686: Booting pauses for about 30 seconds on Acer Aspire 5710Z

    Package: linux-image-2.6.25-1-686
    Version: 2.6.25-1
    Severity: normal

    Since version 2.6.24 booting the Debian kernel is quite slow because it
    pauses for about 30 seconds. It always happens after those lines in the
    booting process:

    [ 9.990058] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
    [ 9.990091] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)

    Since the interval is "heartbeat=30 sec" and also the pause is always
    about 30 seconds long, there might be a connection. The problem happens
    on an Acer Aspire 5710Z laptop.

    Sebastian

    -- Package-specific info:
    ** Version:
    Linux version 2.6.25-1-686 (Debian 2.6.25-1) (waldi@debian.org) (gcc version 4.1.3 20080420 (prerelease) (Debian 4.1.2-22)) #1 SMP Mon Apr 28 13:54:58 UTC 2008

    ** Command line:
    root=/dev/sda5 ro quiet

    ** Not tainted

    ** Kernel log:
    [ 8.027540] ACPI: WMI: Mapper loaded
    [ 8.099282] input: Power Button (FF) as /class/input/input2
    [ 8.285803] acer-wmi: Acer Laptop ACPI-WMI Extras version 0.1
    [ 8.145506] ACPI: Power Button (FF) [PWRF]
    [ 8.145576] input: Lid Switch as /class/input/input3
    [ 8.177615] ACPI: Lid Switch [LID]
    [ 8.177683] input: Sleep Button (CM) as /class/input/input4
    [ 8.241504] ACPI: Sleep Button (CM) [SLPB]
    [ 8.241580] input: Power Button (CM) as /class/input/input5
    [ 8.305592] ACPI: Power Button (CM) [PWRB]
    [ 8.324898] ACPI: AC Adapter [ACAD] (on-line)
    [ 8.337447] ACPI: device:03 is registered as cooling_device2
    [ 8.484265] input: Video Bus as /class/input/input6
    [ 8.535663] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    [ 8.565224] ACPI: device:07 is registered as cooling_device3
    [ 8.565372] input: Video Bus as /class/input/input7
    [ 8.615159] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 8.859224] ACPI: Battery Slot [BAT1] (battery present)
    [ 8.798578] intel_rng: FWH not detected
    [ 9.146404] input: PC Speaker as /class/input/input8
    [ 9.198700] Real Time Clock Driver v1.12ac
    [ 9.294007] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
    [ 9.339410] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
    [ 9.341907] sdhci: Secure Digital Host Controller Interface driver
    [ 9.341910] sdhci: Copyright(c) Pierre Ossman
    [ 9.341941] sdhci: SDHCI controller found at 0000:06:00.1 [1524:0750] (rev 0)
    [ 9.341961] PCI: Enabling device 0000:06:00.1 (0000 -> 0002)
    [ 9.341970] ACPI: PCI Interrupt 0000:06:00.1[A] -> GSI 20 (level, low) -> IRQ 20
    [ 9.342007] PCI: Setting latency timer of device 0000:06:00.1 to 64
    [ 9.342065] mmc0: SDHCI at 0xd0200400 irq 20 DMA
    [ 9.342077] sdhci: SDHCI controller found at 0000:06:00.3 [1524:0751] (rev 0)
    [ 9.342094] PCI: Enabling device 0000:06:00.3 (0000 -> 0002)
    [ 9.342101] ACPI: PCI Interrupt 0000:06:00.3[A] -> GSI 20 (level, low) -> IRQ 20
    [ 9.342114] sdhc1:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
    [ 9.342122] PCI: Setting latency timer of device 0000:06:00.3 to 64
    [ 9.342151] mmc1: SDHCI at 0xd0200100 irq 20 DMA
    [ 9.477742] b43-phy0: Broadcom 4311 WLAN found
    [ 9.545960] phy0: Selected rate control algorithm 'pid'
    [ 9.539405] Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ]
    [ 9.541948] udev: renamed network interface wmaster0 to eth1
    [ 9.632791] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
    [ 9.632824] PCI: Setting latency timer of device 0000:00:1b.0 to 64
    [ 9.864404] input: PS/2 Mouse as /class/input/input9
    [ 9.929540] input: AlpsPS/2 ALPS GlidePoint as /class/input/input10
    [ 9.990058] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
    [ 9.990091] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 41.260551] Adding 1004020k swap on /dev/sda6. Priority:-1 extents:1 across:1004020k
    [ 41.747905] EXT3 FS on sda5, internal journal
    [ 42.306225] loop: module loaded
    [ 42.563179] fuse init (API version 7.9)
    [ 48.165224] warning: `named' uses 32-bit capabilities (legacy support in use)
    [ 48.398454] NET: Registered protocol family 10
    [ 48.399064] lo: Disabled Privacy Extensions
    [ 48.399589] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 48.965280] lp: driver loaded but no devices found
    [ 49.156939] ppdev: user-space parallel port driver
    [ 53.065655] Bluetooth: Core ver 2.11
    [ 53.067120] NET: Registered protocol family 31
    [ 53.067126] Bluetooth: HCI device and connection manager initialized
    [ 53.067131] Bluetooth: HCI socket layer initialized
    [ 53.430853] Bluetooth: L2CAP ver 2.9
    [ 53.430865] Bluetooth: L2CAP socket layer initialized
    [ 53.163425] Bluetooth: RFCOMM socket layer initialized
    [ 53.163448] Bluetooth: RFCOMM TTY layer initialized
    [ 53.163453] Bluetooth: RFCOMM ver 1.8
    [ 53.388785] input: b43-phy0 as /class/input/input11
    [ 53.844929] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
    [ 55.697763] Registered led device: b43-phy0::tx
    [ 55.697791] Registered led device: b43-phy0::rx
    [ 55.697815] Registered led device: b43-phy0::radio
    [ 55.752358] ADDRCONF(NETDEV_UP): wlan0_rename: link is not ready
    [ 55.413717] hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
    [ 55.413717] hda: task_no_data_intr: error=0x04 { AbortedCommand }
    [ 55.413717] ide: failed opcode was: 0xef
    [ 58.916339] [drm] Initialized drm 1.1.0 20060810
    [ 58.919673] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
    [ 58.919684] PCI: Setting latency timer of device 0000:00:02.0 to 64
    [ 58.919759] [drm] Initialized i915 1.6.0 20060119 on minor 0

    ** Loaded modules:
    Module Size Used by
    aes_i586 8256 1
    aes_generic 29160 1 aes_i586
    i915 27648 2
    drm 72280 3 i915
    rfkill_input 4768 0
    rfcomm 36336 0
    l2cap 22784 5 rfcomm
    bluetooth 52900 4 rfcomm,l2cap
    ppdev 8676 0
    parport_pc 25860 0
    lp 11012 0
    parport 33868 3 ppdev,parport_pc,lp
    ipv6 241988 22
    acpi_cpufreq 9228 2
    cpufreq_ondemand 8428 1
    cpufreq_powersave 1856 0
    cpufreq_conservative 7432 0
    cpufreq_stats 5216 0
    freq_table 4512 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
    cpufreq_userspace 3812 0
    fuse 44348 1
    loop 16708 0
    joydev 11328 0
    snd_hda_intel 310008 1
    snd_pcm_oss 37824 0
    arc4 2016 2
    snd_pcm 68228 2 snd_hda_intel,snd_pcm_oss
    ecb 3552 2
    crypto_blkcipher 18116 1 ecb
    snd_mixer_oss 14880 1 snd_pcm_oss
    snd_seq_dummy 3780 0
    b43 132060 0
    snd_seq_oss 28544 0
    snd_seq_midi 8064 0
    rfkill 7252 3 rfkill_input,b43
    snd_rawmidi 22528 1 snd_seq_midi
    mac80211 121964 1 b43
    snd_seq_midi_event 6976 2 snd_seq_oss,snd_seq_midi
    sdhci 16428 0
    iTCO_wdt 11204 0
    snd_seq 45872 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event
    psmouse 35920 0
    i2c_i801 9520 0
    cfg80211 17800 1 mac80211
    mmc_core 43740 1 sdhci
    i2c_core 22548 1 i2c_i801
    rtc 14272 0
    pcspkr 3136 0
    serio_raw 6532 0
    snd_timer 21320 2 snd_pcm,snd_seq
    snd_seq_device 7564 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi ,snd_seq
    input_polldev 4968 1 b43
    rng_core 4900 1 b43
    snd 48772 11 snd_hda_intel,snd_pcm_oss,snd_pcm,snd_mixer_oss,sn d_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_de vice
    battery 8448 0
    soundcore 7488 1 snd
    video 19728 0
    output 3712 1 video
    ac 4448 0
    snd_page_alloc 9992 2 snd_hda_intel,snd_pcm
    acer_wmi 10548 0
    button 8240 0
    wmi 7880 1 acer_wmi
    intel_agp 25084 1
    agpgart 31720 3 drm,intel_agp
    led_class 5284 2 b43,acer_wmi
    evdev 11328 9
    ext3 120264 1
    jbd 43444 1 ext3
    mbcache 8260 1 ext3
    ide_cd_mod 32864 0
    cdrom 31872 1 ide_cd_mod
    ata_generic 8004 0
    usbhid 40192 0
    hid 36032 1 usbhid
    ff_memless 5384 1 usbhid
    sd_mod 26072 3
    piix 7176 0 [permanent]
    ahci 27336 2
    ide_pci_generic 4228 0 [permanent]
    libata 142032 2 ata_generic,ahci
    scsi_mod 138508 2 sd_mod,libata
    ide_core 100312 3 ide_cd_mod,piix,ide_pci_generic
    dock 10448 1 libata
    ehci_hcd 32620 0
    ssb 30820 1 b43
    pcmcia 36044 2 b43,ssb
    pcmcia_core 36436 2 b43,pcmcia
    firmware_class 9088 2 b43,pcmcia
    uhci_hcd 22352 0
    usbcore 129936 4 usbhid,ehci_hcd,uhci_hcd
    tg3 88804 0
    thermal 19100 0
    processor 39660 4 acpi_cpufreq,thermal
    fan 5636 0

    ** PCI devices:
    00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
    Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0
    Capabilities:
    Kernel driver in use: agpgart-intel
    Kernel modules: intel-agp

    00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) (prog-if 00 [VGA controller])
    Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0
    Interrupt: pin A routed to IRQ 16
    Region 0: Memory at d0300000 (32-bit, non-prefetchable) [size=512K]
    Region 1: I/O ports at 5088 [size=8]
    Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
    Region 3: Memory at d0400000 (32-bit, non-prefetchable) [size=256K]
    Capabilities:
    Kernel modules: intelfb

    00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
    Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0
    Region 0: Memory at d0380000 (32-bit, non-prefetchable) [size=512K]
    Capabilities:

    00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02)
    Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 22
    Region 0: Memory at d0440000 (64-bit, non-prefetchable) [size=16K]
    Capabilities:
    Kernel driver in use: HDA Intel
    Kernel modules: snd-hda-intel

    00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
    Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities:
    Kernel driver in use: pcieport-driver
    Kernel modules: shpchp

    00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
    Memory behind bridge: d0000000-d00fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities:
    Kernel driver in use: pcieport-driver
    Kernel modules: shpchp

    00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
    Memory behind bridge: d0100000-d01fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities:
    Kernel driver in use: pcieport-driver
    Kernel modules: shpchp

    00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
    Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
    Interrupt: pin A routed to IRQ 23
    Region 4: I/O ports at 50a0 [size=32]
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci-hcd

    00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
    Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
    Interrupt: pin B routed to IRQ 19
    Region 4: I/O ports at 50c0 [size=32]
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci-hcd

    00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
    Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
    Interrupt: pin C routed to IRQ 18
    Region 4: I/O ports at 50e0 [size=32]
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci-hcd

    00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
    Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
    Interrupt: pin D routed to IRQ 16
    Region 4: I/O ports at 5400 [size=32]
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci-hcd

    00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
    Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
    Interrupt: pin A routed to IRQ 23
    Region 0: Memory at d0644000 (32-bit, non-prefetchable) [size=1K]
    Capabilities:
    Kernel driver in use: ehci_hcd
    Kernel modules: ehci-hcd

    00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0
    Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
    Memory behind bridge: d0200000-d02fffff
    Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities:

    00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
    Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
    Capabilities:
    Kernel modules: iTCO_wdt, intel-rng

    00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 02) (prog-if 8a [Master SecP PriP])
    Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
    Interrupt: pin B routed to IRQ 19
    Region 0: I/O ports at 01f0 [size=8]
    Region 1: I/O ports at 03f4 [size=1]
    Region 2: I/O ports at 0170 [size=8]
    Region 3: I/O ports at 0374 [size=1]
    Region 4: I/O ports at 5090 [size=16]
    Kernel driver in use: PIIX_IDE
    Kernel modules: piix

    00:1f.2 SATA controller [0106]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller [8086:27c5] (rev 02) (prog-if 01 [AHCI 1.0])
    Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
    Interrupt: pin B routed to IRQ 220
    Region 0: I/O ports at 5478 [size=8]
    Region 1: I/O ports at 5470 [size=4]
    Region 2: I/O ports at 5468 [size=8]
    Region 3: I/O ports at 545c [size=4]
    Region 4: I/O ports at 5440 [size=16]
    Region 5: Memory at d0644400 (32-bit, non-prefetchable) [size=1K]
    Capabilities:
    Kernel driver in use: ahci
    Kernel modules: ahci

    00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 02)
    Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
    Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin B routed to IRQ 19
    Region 4: I/O ports at 5420 [size=32]
    Kernel driver in use: i801_smbus
    Kernel modules: i2c-i801

    04:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express [14e4:1693] (rev 02)
    Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR+ Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 219
    Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=64K]
    Expansion ROM at [disabled]
    Capabilities:
    Kernel driver in use: tg3
    Kernel modules: tg3

    05:00.0 Network controller [0280]: Broadcom Corporation BCM94311MCG wlan mini-PCI [14e4:4311] (rev 01)
    Subsystem: AMBIT Microsystem Corp. Unknown device [1468:0422]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 19
    Region 0: Memory at d0100000 (32-bit, non-prefetchable) [size=16K]
    Capabilities:
    Kernel driver in use: b43-pci-bridge
    Kernel modules: ssb

    06:00.0 FLASH memory [0501]: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller [1524:0730]
    Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 (250ns min, 1000ns max), Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 10
    Region 0: Memory at d0200000 (32-bit, non-prefetchable) [size=128]
    Capabilities:

    06:00.1 SD Host controller [0805]: ENE Technology Inc ENE PCI SmartMedia / xD Card Reader Controller [1524:0750] (prog-if 01)
    Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 (8000ns min, 18000ns max)
    Interrupt: pin A routed to IRQ 20
    Region 0: Memory at d0200400 (32-bit, non-prefetchable) [size=256]
    Capabilities:
    Kernel driver in use: sdhci
    Kernel modules: sdhci

    06:00.2 FLASH memory [0501]: ENE Technology Inc Unknown device [1524:0720]
    Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin A routed to IRQ 10
    Region 0: Memory at d0200800 (32-bit, non-prefetchable) [disabled] [size=128]
    Capabilities:

    06:00.3 FLASH memory [0501]: ENE Technology Inc ENE PCI Secure Digital / MMC Card Reader Controller [1524:0751]
    Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 (8000ns min, 18000ns max)
    Interrupt: pin A routed to IRQ 20
    Region 0: Memory at d0200100 (32-bit, non-prefetchable) [size=256]
    Capabilities:
    Kernel driver in use: sdhci
    Kernel modules: sdhci



    -- System Information:
    Debian Release: lenny/sid
    APT prefers testing
    APT policy: (500, 'testing')
    Architecture: i386 (i686)

    Kernel: Linux 2.6.25-1-686 (SMP w/2 CPU cores)
    Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
    Shell: /bin/sh linked to /bin/bash

    Versions of packages linux-image-2.6.25-1-686 depends on:
    ii debconf [debconf-2.0] 1.5.21 Debian configuration management sy
    ii initramfs-tools [linux-initra 0.92a tools for generating an initramfs
    ii module-init-tools 3.4-1 tools for managing Linux kernel mo

    Versions of packages linux-image-2.6.25-1-686 recommends:
    ii libc6-i686 2.7-10 GNU C Library: Shared libraries [i

    -- debconf information:
    shared/kernel-image/really-run-bootloader: true
    linux-image-2.6.25-1-686/postinst/kimage-is-a-directory:
    linux-image-2.6.25-1-686/preinst/abort-install-2.6.25-1-686:
    linux-image-2.6.25-1-686/preinst/failed-to-move-modules-2.6.25-1-686:
    linux-image-2.6.25-1-686/postinst/old-dir-initrd-link-2.6.25-1-686: true
    linux-image-2.6.25-1-686/postinst/create-kimage-link-2.6.25-1-686: true
    linux-image-2.6.25-1-686/postinst/bootloader-test-error-2.6.25-1-686:
    linux-image-2.6.25-1-686/preinst/overwriting-modules-2.6.25-1-686: true
    linux-image-2.6.25-1-686/preinst/initrd-2.6.25-1-686:
    linux-image-2.6.25-1-686/postinst/old-initrd-link-2.6.25-1-686: true
    linux-image-2.6.25-1-686/postinst/depmod-error-2.6.25-1-686: false
    linux-image-2.6.25-1-686/preinst/lilo-has-ramdisk:
    linux-image-2.6.25-1-686/prerm/removing-running-kernel-2.6.25-1-686: true
    linux-image-2.6.25-1-686/postinst/bootloader-error-2.6.25-1-686:
    linux-image-2.6.25-1-686/postinst/depmod-error-initrd-2.6.25-1-686: false
    linux-image-2.6.25-1-686/preinst/abort-overwrite-2.6.25-1-686:
    linux-image-2.6.25-1-686/preinst/lilo-initrd-2.6.25-1-686: true
    linux-image-2.6.25-1-686/preinst/bootloader-initrd-2.6.25-1-686: true
    linux-image-2.6.25-1-686/preinst/elilo-initrd-2.6.25-1-686: true
    linux-image-2.6.25-1-686/prerm/would-invalidate-boot-loader-2.6.25-1-686: true
    linux-image-2.6.25-1-686/postinst/old-system-map-link-2.6.25-1-686: true



    --
    To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

  2. Bug#479381: linux-image-2.6.25-1-686: Booting pauses for about 30 seconds on Acer Aspire 5710Z

    On Sun, 04 May 2008, Sebastian Krause wrote:

    > Package: linux-image-2.6.25-1-686
    > Version: 2.6.25-1
    > Severity: normal
    >
    > Since version 2.6.24 booting the Debian kernel is quite slow because it
    > pauses for about 30 seconds. It always happens after those lines in the
    > booting process:
    >
    > [ 9.990058] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
    > [ 9.990091] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    >
    > Since the interval is "heartbeat=30 sec" and also the pause is always
    > about 30 seconds long, there might be a connection. The problem happens
    > on an Acer Aspire 5710Z laptop.


    please report that upstream on bugzilla.kernel.org and let us know the
    bug number.

    thanks

    --
    maks



    --
    To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

  3. Bug#479381: linux-image-2.6.25-1-686: Booting pauses for about 30 seconds on Acer Aspire 5710Z

    On Fri, May 09, 2008 at 12:08:25AM +0200, maximilian attems wrote:
    > On Sun, 04 May 2008, Sebastian Krause wrote:
    >
    > > Package: linux-image-2.6.25-1-686
    > > Version: 2.6.25-1
    > > Severity: normal
    > >
    > > Since version 2.6.24 booting the Debian kernel is quite slow because it
    > > pauses for about 30 seconds. It always happens after those lines in the
    > > booting process:
    > >
    > > [ 9.990058] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
    > > [ 9.990091] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    > >
    > > Since the interval is "heartbeat=30 sec" and also the pause is always
    > > about 30 seconds long, there might be a connection. The problem happens
    > > on an Acer Aspire 5710Z laptop.

    >
    > please report that upstream on bugzilla.kernel.org and let us know the
    > bug number.


    Sebastian, does the problem still persist with the Lenny kernel?
    If so, did you file the kernel.org bug report as suggested by Maks?

    Cheers,
    Moritz



    --
    To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

  4. Bug#479381: linux-image-2.6.25-1-686: Booting pauses for about 30 seconds on Acer Aspire 5710Z

    Moritz Muehlenhoff wrote:
    > On Fri, May 09, 2008 at 12:08:25AM +0200, maximilian attems wrote:
    >> On Sun, 04 May 2008, Sebastian Krause wrote:
    >>> Since the interval is "heartbeat=30 sec" and also the pause is always
    >>> about 30 seconds long, there might be a connection. The problem happens
    >>> on an Acer Aspire 5710Z laptop.

    >> please report that upstream on bugzilla.kernel.org and let us know the
    >> bug number.

    >
    > Sebastian, does the problem still persist with the Lenny kernel?
    > If so, did you file the kernel.org bug report as suggested by Maks?


    Yes, I did file the bug on kernel.org:
    http://bugzilla.kernel.org/show_bug.cgi?id=10728

    Unfortunately I cannot test this issue anymore since I've changed my
    laptop since then and in my current laptop there are no such problems.

    I did what Andrew Morton suggested in my bug report there. However, it
    couldn't help find the cause since the pause doesn't happen when the
    kernel boots up, but when init has been running for quite a bit already.
    In the end I wasn't even sure anymore if this was actually a kernel bug
    or maybe something with udev, as some comments by Marco Piazza suggested
    in the upstream bug report.

    If I'm the only one who had this problem, I'm fine with simply closing
    this bug report. For me the bug got fixed by buying a new laptop.

    Sebastian



    --
    To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

  5. Bug#479381: linux-image-2.6.25-1-686: Booting pauses for about 30 seconds on Acer Aspire 5710Z

    On Sat, 2008-11-08 at 04:30 +0100, Sebastian Krause wrote:
    > Moritz Muehlenhoff wrote:
    > > On Fri, May 09, 2008 at 12:08:25AM +0200, maximilian attems wrote:
    > >> On Sun, 04 May 2008, Sebastian Krause wrote:
    > >>> Since the interval is "heartbeat=30 sec" and also the pause is always
    > >>> about 30 seconds long, there might be a connection. The problem happens
    > >>> on an Acer Aspire 5710Z laptop.
    > >> please report that upstream on bugzilla.kernel.org and let us know the
    > >> bug number.

    > >
    > > Sebastian, does the problem still persist with the Lenny kernel?
    > > If so, did you file the kernel.org bug report as suggested by Maks?

    >
    > Yes, I did file the bug on kernel.org:
    > http://bugzilla.kernel.org/show_bug.cgi?id=10728
    >
    > Unfortunately I cannot test this issue anymore since I've changed my
    > laptop since then and in my current laptop there are no such problems.

    [...]

    I've seen this problem too, but never got round to reporting it as a
    bug. I'm not sure whether it's the kernel or udev (or something else)
    at fault. It's totally reproducible on this particular machine so I can
    provide any information necessary to track this down.

    Ben.


    -----BEGIN PGP SIGNATURE-----
    Version: GnuPG v1.4.9 (GNU/Linux)

    iD8DBQBJFcay79ZNCRIGYgcRAs/5AKCMuQ9AfJXoHYC3jJ8pTifwWo4GxwCcDFbX
    UeR5mFEmNOA/ntyWabT9slY=
    =gKYh
    -----END PGP SIGNATURE-----


  6. Bug#479381: linux-image-2.6.25-1-686: Booting pauses for about 30 seconds on Acer Aspire 5710Z

    On 2008-11-08 18:04 +0100, Ben Hutchings wrote:

    > I've seen this problem too, but never got round to reporting it as a
    > bug. I'm not sure whether it's the kernel or udev (or something else)
    > at fault. It's totally reproducible on this particular machine so I can
    > provide any information necessary to track this down.


    Maybe you have a wlan0_rename device or similar? IIRC there were some
    changes in 2.6.24 that cause breakage with the
    /etc/udev/rules.d/70-persistent-net.rules that etch's udev creates¹.
    Some seven months ago I had this problem myself, also on a laptop with
    the b43 driver, the solution was to move said file out of the way and
    reboot. See also this Ubuntu bug:
    https://bugs.launchpad.net/ubuntu/+s...ev/+bug/213903 and its
    duplicates.

    Sven

    ¹ In etch the file is /etc/udev/rules.d/z25_persistent-net.rules, it is
    automatically renamed on udev upgrades.



    --
    To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

  7. Bug#479381: linux-image-2.6.25-1-686: Booting pauses for about 30 seconds on Acer Aspire 5710Z

    On Sat, 2008-11-08 at 17:04 +0000, Ben Hutchings wrote:
    > On Sat, 2008-11-08 at 04:30 +0100, Sebastian Krause wrote:
    > > Moritz Muehlenhoff wrote:
    > > > On Fri, May 09, 2008 at 12:08:25AM +0200, maximilian attems wrote:
    > > >> On Sun, 04 May 2008, Sebastian Krause wrote:
    > > >>> Since the interval is "heartbeat=30 sec" and also the pause is always
    > > >>> about 30 seconds long, there might be a connection. The problem happens
    > > >>> on an Acer Aspire 5710Z laptop.
    > > >> please report that upstream on bugzilla.kernel.org and let us know the
    > > >> bug number.
    > > >
    > > > Sebastian, does the problem still persist with the Lenny kernel?
    > > > If so, did you file the kernel.org bug report as suggested by Maks?

    > >
    > > Yes, I did file the bug on kernel.org:
    > > http://bugzilla.kernel.org/show_bug.cgi?id=10728
    > >
    > > Unfortunately I cannot test this issue anymore since I've changed my
    > > laptop since then and in my current laptop there are no such problems.

    > [...]
    >
    > I've seen this problem too, but never got round to reporting it as a
    > bug. I'm not sure whether it's the kernel or udev (or something else)
    > at fault. It's totally reproducible on this particular machine so I can
    > provide any information necessary to track this down.


    The upstream bug report says udev (or its configuration) is at fault.
    After some further investigation, I found the same is true in my case,
    but it seems unconnected.

    Ben.


    -----BEGIN PGP SIGNATURE-----
    Version: GnuPG v1.4.9 (GNU/Linux)

    iD8DBQBJFdSn79ZNCRIGYgcRAi4YAJ0XJkOgj58GpbgAVDcBCp 5p6fu8xQCfUWwq
    HEg8DuTGYCo5fMbshkAoy+w=
    =nc/l
    -----END PGP SIGNATURE-----


+ Reply to Thread