Bug#462221: linux-image-2.6.23-1-amd64: No detection of dual, core and Kernel Panic - Debian

This is a discussion on Bug#462221: linux-image-2.6.23-1-amd64: No detection of dual, core and Kernel Panic - Debian ; Hi, I'm so sorry to be such a bad bug reporter. Anyway, I've upgrade to 2.6.24-1 : uname -a Linux lgmt-th3 2.6.24-1-amd64 #1 SMP Thu Mar 27 16:52:38 UTC 2008 x86_64 GNU/Linux I *can* boot with the noacpi. Here is ...

+ Reply to Thread
Results 1 to 2 of 2

Thread: Bug#462221: linux-image-2.6.23-1-amd64: No detection of dual, core and Kernel Panic

  1. Bug#462221: linux-image-2.6.23-1-amd64: No detection of dual, core and Kernel Panic

    Hi,

    I'm so sorry to be such a bad bug reporter.

    Anyway,

    I've upgrade to 2.6.24-1 :

    uname -a
    Linux lgmt-th3 2.6.24-1-amd64 #1 SMP Thu Mar 27 16:52:38 UTC 2008 x86_64
    GNU/Linux

    I *can* boot with the noacpi. Here is my /boot/grub/menu.lst with noacpi :

    title Debian GNU/Linux, kernel 2.6.24-1-amd64
    root (hd0,1)
    kernel /boot/vmlinuz-2.6.24-1-amd64 root=/dev/sda2 ro noacpi
    initrd /boot/initrd.img-2.6.24-1-amd64


    The previous options were :
    title Debian GNU/Linux, kernel 2.6.18-5-amd64
    root (hd0,1)
    kernel /boot/vmlinuz-2.6.18-5-amd64 root=/dev/sda2 ro acpi=off
    initrd /boot/initrd.img-2.6.18-5-amd64



    Thank you for your help.

    xabi


    For information :

    cat /proc/cmdline
    root=/dev/sda2 ro noacpi



    dmesg
    Initializing cgroup subsys cpuset
    Linux version 2.6.24-1-amd64 (Debian 2.6.24-5) (waldi@debian.org) (gcc
    version 4.1.3 20080308 (prerelease) (Debian 4.1.2-21)) #1 SMP Thu Mar 27
    16:52:38 UTC 2008
    Command line: root=/dev/sda2 ro noacpi
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000007e7b1d00 (usable)
    BIOS-e820: 000000007e7b1d00 - 000000007e7b3d00 (ACPI NVS)
    BIOS-e820: 000000007e7b3d00 - 000000007f000000 (reserved)
    BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved)
    BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved)
    Entering add_active_range(0, 0, 159) 0 entries of 3200 used
    Entering add_active_range(0, 256, 518065) 1 entries of 3200 used
    end_pfn_map = 1048576
    DMI 2.4 present.
    ACPI: RSDP 000E7610, 0014 (r0 COMPAQ)
    ACPI: RSDT 7E7C3D40, 003C (r1 HPQOEM SLIC-BPC 20071115 0)
    ACPI: FACP 7E7C3DE8, 0074 (r1 COMPAQ BROADH2O 1 0)
    ACPI: DSDT 7E7C4143, 96F0 (r1 COMPAQ DSDT_PRJ 1 MSFT 100000E)
    ACPI: FACS 7E7C3D00, 0040
    ACPI: APIC 7E7C3E5C, 0068 (r1 COMPAQ BROADH2O 1 0)
    ACPI: ASF! 7E7C3EC4, 0063 (r32 COMPAQ BROADH2O 1 0)
    ACPI: MCFG 7E7C3F27, 003C (r1 COMPAQ BROADH2O 1 0)
    ACPI: TCPA 7E7C3F63, 0032 (r1 COMPAQ BROADH2O 1 0)
    ACPI: HPET 7E7C410B, 0038 (r1 COMPAQ BROADH2O 1 0)
    ACPI: DMI detected: Hewlett-Packard
    No NUMA configuration found
    Faking a node at 0000000000000000-000000007e7b1000
    Entering add_active_range(0, 0, 159) 0 entries of 3200 used
    Entering add_active_range(0, 256, 518065) 1 entries of 3200 used
    Bootmem setup node 0 0000000000000000-000000007e7b1000
    Zone PFN ranges:
    DMA 0 -> 4096
    DMA32 4096 -> 1048576
    Normal 1048576 -> 1048576
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0 -> 159
    0: 256 -> 518065
    On node 0 totalpages: 517968
    DMA zone: 56 pages used for memmap
    DMA zone: 1066 pages reserved
    DMA zone: 2877 pages, LIFO batch:0
    DMA32 zone: 7026 pages used for memmap
    DMA32 zone: 506943 pages, LIFO batch:31
    Normal zone: 0 pages used for memmap
    Movable zone: 0 pages used for memmap
    ACPI: PM-Timer IO Port: 0xf808
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Processor #0 (Bootup-CPU)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Processor #1
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Setting APIC routing to flat
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    Using ACPI (MADT) for SMP configuration information
    swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
    swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e8000
    swsusp: Registered nosave memory region: 00000000000e8000 - 0000000000100000
    Allocating PCI resources starting at 80000000 (gap: 7f000000:75000000)
    SMP: Allowing 2 CPUs, 0 hotplug CPUs
    PERCPU: Allocating 34400 bytes of per cpu data
    Built 1 zonelists in Node order, mobility grouping on. Total pages: 509820
    Policy zone: DMA32
    Kernel command line: root=/dev/sda2 ro noacpi
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 32768 bytes)
    hpet clockevent registered
    TSC calibrated against HPET
    time.c: Detected 2127.999 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Checking aperture...
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Memory: 2032368k/2072260k available (2143k kernel code, 39504k reserved,
    1003k data, 316k init)
    Calibrating delay using timer specific routine.. 4259.09 BogoMIPS
    (lpj=8518189)
    Security Framework initialized
    SELinux: Disabled at boot.
    Capability LSM initialized
    Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Mount-cache hash table entries: 256
    Initializing cgroup subsys ns
    Initializing cgroup subsys cpuacct
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    CPU 0/0 -> Node 0
    using mwait in idle threads.
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU0: Thermal monitoring enabled (TM2)
    SMP alternatives: switching to UP code
    ACPI: Core revision 20070126
    Using local APIC timer interrupts.
    APIC timer calibration result 16624992
    Detected 16.624 MHz APIC timer.
    SMP alternatives: switching to SMP code
    Booting processor 1/2 APIC 0x1
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 4255.99 BogoMIPS
    (lpj=8511996)
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    CPU 1/1 -> Node 0
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    CPU1: Thermal monitoring enabled (TM2)
    Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 02
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Brought up 2 CPUs
    net_namespace: 120 bytes
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: Using MMCONFIG at f4000000 - f7ffffff
    ACPI: EC: Look up EC in DSDT
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI quirk: region f800-f87f claimed by ICH6 ACPI/GPIO/TCO
    PCI quirk: region fa00-fa3f claimed by ICH6 GPIO
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 14 15)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 14 15)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 14 15)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
    pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
    pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
    pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
    pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
    pnp 00:08: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
    pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)
    pnp 00:0a: Plug and Play ACPI device, IDs PNP0003 (active)
    pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
    pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
    pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    pnp 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
    pnp 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
    pnp: PnP ACPI: found 16 devices
    ACPI: ACPI bus type pnp unregistered
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
    report
    NET: Registered protocol family 8
    NET: Registered protocol family 20
    PCI-GART: No AMD northbridge found.
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    hpet0: 3 64-bit timers, 14318180 Hz
    ACPI: RTC can wake from S4
    Time: tsc clocksource has been installed.
    pnp: the driver 'system' has been registered
    system 00:0c: driver attached
    system 00:0d: ioport range 0x400-0x41f has been reserved
    system 00:0d: ioport range 0x420-0x43f has been reserved
    system 00:0d: ioport range 0x440-0x45f has been reserved
    system 00:0d: ioport range 0x460-0x47f has been reserved
    system 00:0d: ioport range 0x480-0x48f has been reserved
    system 00:0d: ioport range 0xf800-0xf81f has been reserved
    system 00:0d: ioport range 0xf820-0xf83f has been reserved
    system 00:0d: ioport range 0xf840-0xf85f has been reserved
    system 00:0d: ioport range 0xf860-0xf87f has been reserved
    system 00:0d: ioport range 0xfa00-0xfa3f has been reserved
    system 00:0d: ioport range 0xfc00-0xfc7f has been reserved
    system 00:0d: ioport range 0xfc80-0xfcff has been reserved
    system 00:0d: ioport range 0xfe00-0xfe7f has been reserved
    system 00:0d: ioport range 0xfe80-0xfeff has been reserved
    system 00:0d: driver attached
    system 00:0e: ioport range 0x4d0-0x4d1 has been reserved
    system 00:0e: ioport range 0xcb0-0xcbf has been reserved
    system 00:0e: driver attached
    system 00:0f: iomem range 0x0-0x9ffff could not be reserved
    system 00:0f: iomem range 0x100000-0x7effffff could not be reserved
    system 00:0f: iomem range 0xe4000-0xfffff could not be reserved
    system 00:0f: iomem range 0xfec01000-0xfecfffff could not be reserved
    system 00:0f: iomem range 0xfed00400-0xfed3ffff could not be reserved
    system 00:0f: iomem range 0xfed40000-0xffffffff could not be reserved
    system 00:0f: iomem range 0xf4000000-0xf7ffffff could not be reserved
    system 00:0f: iomem range 0xcd000-0xe3fff has been reserved
    system 00:0f: driver attached
    PCI: Bridge: 0000:00:1c.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1e.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
    TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP reno registered
    checking if image is initramfs...<7>Switched to high resolution mode on
    CPU 1
    Switched to high resolution mode on CPU 0
    it is
    Freeing initrd memory: 6706k freed
    audit: initializing netlink socket (disabled)
    audit(1207837323.908:1): initialized
    Total HugeTLB memory allocated, 0
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    Boot video device is 0000:00:02.0
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.0cie00]
    Allocate Port Service[0000:00:1c.0cie02]
    Allocate Port Service[0000:00:1c.0cie03]
    Real Time Clock Driver v1.12ac
    hpet_resources: 0xfed00000 is busy
    Linux agpgart interface v0.102
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    pnp: the driver 'serial' has been registered
    00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    serial 00:08: driver attached
    RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
    input: Macintosh mouse button emulation as /class/input/input0
    pnp: the driver 'i8042 kbd' has been registered
    i8042 kbd 00:06: driver attached
    pnp: the driver 'i8042 aux' has been registered
    i8042 aux 00:05: driver attached
    PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP bic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    registered taskstats version 1
    Freeing unused kernel memory: 316k freed
    input: AT Translated Set 2 keyboard as /class/input/input1
    ACPI: SSDT 7E7CE670, 0320 (r1 COMPAQ CPU_TM2 1 MSFT 100000E)
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: Processor [CPU1] (supports 8 throttling states)
    ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is
    not present [20070126]
    ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is
    not present [20070126]
    Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
    Copyright (c) 1999-2006 Intel Corporation.
    ACPI: PCI Interrupt 0000:00:19.0[B] -> GSI 19 (level, low) -> IRQ 19
    PCI: Setting latency timer of device 0000:00:19.0 to 64
    e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1)
    00:0f:fe:79:c3:f3
    USB Universal Host Controller Interface driver v3.0
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    pnp: the driver 'ide' has been registered
    e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
    ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
    PCI: Setting latency timer of device 0000:00:1a.0 to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001020
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    FDC 0 is a post-1991 82077
    ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
    PCI: Setting latency timer of device 0000:00:1a.1 to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001040
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001060
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001080
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
    PCI: Setting latency timer of device 0000:00:1a.7 to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 5
    ehci_hcd 0000:00:1a.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1a.7
    ehci_hcd 0000:00:1a.7: irq 22, io mem 0xf0525000
    usb 2-2: new full speed USB device using uhci_hcd and address 2
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 4 ports detected
    ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6
    ehci_hcd 0000:00:1d.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf0525400
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb6: configuration #1 chosen from 1 choice
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 4 ports detected
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ata_piix 0000:00:1f.2: version 2.12
    ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x10e0 irq 14
    ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x10e8 irq 15
    usb 5-4: new high speed USB device using ehci_hcd and address 2
    ata1.00: ATA-7: Hitachi HDS721616PLA380, P22OABDA, max UDMA/100
    ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
    ata1.00: configured for UDMA/100
    usb 5-4: configuration #1 chosen from 1 choice
    usb 4-1: new low speed USB device using uhci_hcd and address 2
    ata2.00: ATAPI: ATAPI DVD A DH16A1L, KH39, max UDMA/100
    usb 4-1: configuration #1 chosen from 1 choice
    ata2.00: configured for UDMA/100
    scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5
    scsi 1:0:0:0: CD-ROM ATAPI DVD A DH16A1L KH39 PQ: 0 ANSI: 5
    usbcore: registered new interface driver hiddev
    Driver 'sd' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
    support DPO or FUA
    sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
    support DPO or FUA
    sda:<4>Driver 'sr' needs updating - please use bus_type methods
    input: Logitech Logitech USB Optical Mouse as /class/input/input2
    sda1 sda2 sda3 sda4 < sda5<6>input,hidraw0: USB HID v1.11 Mouse
    [Logitech Logitech USB Optical Mouse] on usb-0000:00:1d.1-1
    usbcore: registered new interface driver usbhid
    drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
    sda6 sda7 sda8 >
    sd 0:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    Attempting manual resume
    swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
    swsusp: Basic memory bitmaps created
    swsusp: Basic memory bitmaps freed
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    agpgart: Detected an Intel 965Q Chipset.
    agpgart: Detected 7676K stolen memory.
    agpgart: AGP aperture is 256M @ 0xe0000000
    input: Power Button (FF) as /class/input/input3
    ACPI: Power Button (FF) [PWRF]
    input: Power Button (CM) as /class/input/input4
    ACPI: Power Button (CM) [PBTN]
    ACPI Exception (video-1532): AE_NOT_FOUND, Evaluating _DOD [20070126]
    input: Video Bus as /class/input/input5
    ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no)
    input: PC Speaker as /class/input/input6
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
    iTCO_wdt: Found a ICH8DO TCO device (Version=2, TCOBASE=0xf860)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    pnp: the driver 'parport_pc' has been registered
    parport_pc 00:07: reported by Plug and Play ACPI
    parport0: PC-style at 0x378 (0x778), irq 7, dma 3
    [PCSPP,TRISTATE,COMPAT,ECP,DMA]
    parport_pc 00:07: driver attached
    ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
    PCI: Setting latency timer of device 0000:00:1b.0 to 64
    Adding 979956k swap on /dev/sda3. Priority:-1 extents:1 across:979956k
    EXT3 FS on sda2, internal journal
    loop: module loaded
    device-mapper: uevent: version 1.0.3
    device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised:
    dm-devel@redhat.com
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda5, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    FAT: bogus number of reserved sectors
    VFS: Can't find a valid FAT filesystem on dev sda7.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda6, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow
    Control: RX/TX
    e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    lp0: using parport0 (interrupt-driven).
    ppdev: user-space parallel port driver
    [drm] Initialized drm 1.1.0 20060810
    ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:02.0 to 64
    [drm] Initialized i915 1.6.0 20060119 on minor 0
    eth0: no IPv6 routers present




    --
    To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

  2. Bug#462221: linux-image-2.6.23-1-amd64: No detection of dual, core and Kernel Panic

    On Thu, Apr 10, 2008 at 02:31:02PM +0200, Xavier Pessoles wrote:
    >
    > I'm so sorry to be such a bad bug reporter.


    well we don't have a real acpi maintainer here.

    > Anyway,
    >
    > I've upgrade to 2.6.24-1 :


    so please test out newer 2.6.25-rc8,
    if problem persists there please file in bugzilla.kernel.org
    and let us know the bug number.

    sunny greetings

    --
    maks



    --
    To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

+ Reply to Thread