Bug#466719: linux-image-2.6.24-1-amd64: sometimes doesn't join multicast groups, breaks IPv6 - Debian

This is a discussion on Bug#466719: linux-image-2.6.24-1-amd64: sometimes doesn't join multicast groups, breaks IPv6 - Debian ; Package: linux-image-2.6.24-1-amd64 Version: 2.6.24-4 Severity: important After booting there will be multicast addresses missing on eth0. Sometimes 33:33:00:00:00:01 is missing and I will not receive router advertisements, other times 33:33:ff:81:16:3a is missing and neighbor discovery breaks instead. There was a ...

+ Reply to Thread
Results 1 to 3 of 3

Thread: Bug#466719: linux-image-2.6.24-1-amd64: sometimes doesn't join multicast groups, breaks IPv6

  1. Bug#466719: linux-image-2.6.24-1-amd64: sometimes doesn't join multicast groups, breaks IPv6

    Package: linux-image-2.6.24-1-amd64
    Version: 2.6.24-4
    Severity: important

    After booting there will be multicast addresses missing on eth0.
    Sometimes 33:33:00:00:00:01 is missing and I will not receive router
    advertisements, other times 33:33:ff:81:16:3a is missing and neighbor
    discovery breaks instead. There was a similar problem in bug #410375.

    But it's different multicast addresses missing on each boot. Here is
    the output from the "ip maddr" command from a few boots:

    2: eth0
    link 33:33:ff:81:16:3a users 2
    link 33:33:00:00:00:01 users 2
    inet 224.0.0.1
    inet6 ff02::1:ff81:163a users 2
    inet6 ff02::1

    2: eth0
    link 33:33:00:00:00:01 users 2
    inet 224.0.0.1
    inet6 ff02::1:ff81:163a users 2
    inet6 ff02::1

    2: eth0
    link 33:33:ff:81:16:3a users 2
    link 33:33:00:00:00:01 users 2
    link 01:00:5e:00:00:01 users 2
    inet 224.0.0.1
    inet6 ff02::1:ff81:163a users 2
    inet6 ff02::1

    2: eth0
    link 33:33:ff:81:16:3a users 2
    inet 224.0.0.1
    inet6 ff02::1:ff81:163a users 2
    inet6 ff02::1

    A colleague of mine has the same problem with Gentoo and this kernel:
    Linux oberon 2.6.24.2 #2 SMP Mon Feb 11 22:39:41 CET 2008 x86_64 Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz GenuineIntel GNU/Linux

    Note that we both run 2.6.24 with dual-core processors.


    -- Package-specific info:
    ** Version:
    Linux version 2.6.24-1-amd64 (Debian 2.6.24-4) (waldi@debian.org) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 SMP Mon Feb 11 13:47:43 UTC 2008

    ** Command line:
    root=/dev/mapper/industria-root ro

    ** Tainted: P (1)

    ** Kernel log:
    ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 23
    sata_nv 0000:00:08.0: Using ADMA mode
    PCI: Setting latency timer of device 0000:00:08.0 to 64
    scsi2 : sata_nv
    scsi3 : sata_nv
    ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc000 irq 23
    ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc008 irq 23
    ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata3.00: ATA-8: SAMSUNG HD321KJ, CP100-10, max UDMA7
    ata3.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32)
    ata3.00: configured for UDMA/133
    ata4: SATA link down (SStatus 0 SControl 300)
    scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5
    ata3: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
    Driver 'sd' needs updating - please use bus_type methods
    sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    sd 2:0:0:0: [sda] Write Protect is off
    sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    sd 2:0:0:0: [sda] Write Protect is off
    sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda:<4>Driver 'sr' needs updating - please use bus_type methods
    sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 0:0:0:0: Attached scsi CD-ROM sr0
    sda1 sda2 < sda5 >
    sd 2:0:0:0: [sda] Attached SCSI disk
    sr 0:0:0:0: Attached scsi generic sg0 type 5
    sd 2:0:0:0: Attached scsi generic sg1 type 0
    device-mapper: uevent: version 1.0.3
    device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
    Attempting manual resume
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    input: Power Button (FF) as /class/input/input4
    i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
    i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
    ACPI: Power Button (FF) [PWRF]
    input: Power Button (CM) as /class/input/input5
    ACPI: Power Button (CM) [PWRB]
    input: PC Speaker as /class/input/input6
    pnp: the driver 'parport_pc' has been registered
    parport_pc 00:09: reported by Plug and Play ACPI
    parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
    ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
    ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 22
    PCI: Setting latency timer of device 0000:00:04.0 to 64
    parport_pc 00:09: driver attached
    intel8x0_measure_ac97_clock: measured 53733 usecs
    intel8x0: clocking to 46895
    EXT3 FS on dm-4, internal journal
    loop: module loaded
    powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ processors (2 cpu cores) (version 2.20.00)
    powernow-k8: 0 : fid 0x14 (2800 MHz), vid 0x8
    powernow-k8: 1 : fid 0x12 (2600 MHz), vid 0xa
    powernow-k8: 2 : fid 0x10 (2400 MHz), vid 0xc
    powernow-k8: 3 : fid 0xe (2200 MHz), vid 0xe
    powernow-k8: 4 : fid 0xc (2000 MHz), vid 0x10
    powernow-k8: 5 : fid 0xa (1800 MHz), vid 0x10
    powernow-k8: 6 : fid 0x2 (1000 MHz), vid 0x12
    fuse init (API version 7.9)
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda1, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-6, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-3, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-0, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-1, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    NET: Registered protocol family 15
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    802.1Q VLAN Support v1.8 Ben Greear
    All bugs added by David S. Miller
    Initializing XFRM netlink socket
    Bluetooth: Core ver 2.11
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: L2CAP ver 2.9
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: RFCOMM socket layer initialized
    Bluetooth: RFCOMM TTY layer initialized
    Bluetooth: RFCOMM ver 1.8
    Clocksource tsc unstable (delta = -71451060 ns)
    nvidia: module license 'NVIDIA' taints kernel.
    ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
    ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:05:00.0 to 64
    NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.09 Fri Jan 11 14:04:37 PST 2008
    eth0.3: no IPv6 routers present

    ** Loaded modules:
    Module Size Used by
    nvidia 8851908 34
    rfcomm 46240 0
    l2cap 29568 5 rfcomm
    bluetooth 65540 4 rfcomm,l2cap
    cpufreq_userspace 9604 1
    ac 11400 0
    battery 19976 0
    xfrm4_mode_transport 6656 12
    xfrm_user 30592 4
    xfrm4_tunnel 7552 0
    tunnel4 8592 1 xfrm4_tunnel
    ipcomp 12684 0
    esp4 12800 6
    ah4 10880 0
    8021q 27664 0
    ipv6 286248 36
    deflate 8448 0
    zlib_deflate 24088 1 deflate
    zlib_inflate 19328 1 deflate
    twofish 11392 0
    twofish_common 42240 1 twofish
    camellia 34432 0
    serpent 23040 0
    blowfish 13184 0
    des_generic 21376 0
    ecb 8192 0
    xcbc 10248 0
    sha256_generic 13312 0
    sha1_generic 7296 6
    crypto_null 7296 0
    af_key 42388 0
    fuse 53680 1
    aes_generic 31040 0
    aes_x86_64 29992 7
    cbc 9088 7
    blkcipher 11780 2 ecb,cbc
    dm_crypt 18568 1
    powernow_k8 18464 1
    freq_table 9728 1 powernow_k8
    loop 22788 0
    snd_intel8x0 41000 0
    parport_pc 42408 0
    serio_raw 11908 0
    snd_ac97_codec 118232 1 snd_intel8x0
    parport 44812 1 parport_pc
    psmouse 45724 0
    ac97_bus 6912 1 snd_ac97_codec
    pcspkr 7808 0
    k8temp 10496 0
    snd_pcm_oss 46624 0
    snd_mixer_oss 21376 1 snd_pcm_oss
    snd_pcm 89352 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
    i2c_nforce2 11136 0
    snd_timer 28552 1 snd_pcm
    button 13984 0
    i2c_core 29824 2 nvidia,i2c_nforce2
    snd 65896 6 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_ oss,snd_pcm,snd_timer
    soundcore 13216 1 snd
    snd_page_alloc 15248 2 snd_intel8x0,snd_pcm
    joydev 17536 0
    evdev 17024 0
    ext3 139024 6
    jbd 55976 1 ext3
    mbcache 13952 1 ext3
    dm_mirror 27008 0
    dm_snapshot 21960 0
    dm_mod 67832 19 dm_crypt,dm_mirror,dm_snapshot
    sg 41752 0
    sr_mod 22820 0
    cdrom 39464 1 sr_mod
    sd_mod 33408 3
    sata_nv 33032 2
    usbhid 35168 0
    hid 41792 1 usbhid
    ata_generic 13060 0
    amd74xx 14360 0 [permanent]
    libata 162736 2 sata_nv,ata_generic
    scsi_mod 170296 4 sg,sr_mod,sd_mod,libata
    floppy 66664 0
    generic 9732 0 [permanent]
    ide_core 144920 2 amd74xx,generic
    forcedeth 54540 0
    ohci_hcd 28164 0
    ehci_hcd 39692 0
    thermal 22688 0
    processor 45032 2 powernow_k8,thermal
    fan 9864 0

    ** PCI devices:
    00:00.0 Memory controller [0580]: nVidia Corporation CK804 Memory Controller [10de:005e] (rev a3)
    Subsystem: ASUSTeK Computer Inc. A8N-E Mainboard [1043:815a]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0
    Capabilities:

    00:01.0 ISA bridge [0601]: nVidia Corporation CK804 ISA Bridge [10de:0050] (rev f3)
    Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
    Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0

    00:01.1 SMBus [0c05]: nVidia Corporation CK804 SMBus [10de:0052] (rev a2)
    Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
    Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Interrupt: pin A routed to IRQ 255
    Region 0: I/O ports at fc00 [size=32]
    Region 4: I/O ports at 4c00 [size=64]
    Region 5: I/O ports at 4c40 [size=64]
    Capabilities:
    Kernel driver in use: nForce2_smbus
    Kernel modules: i2c-nforce2

    00:02.0 USB Controller [0c03]: nVidia Corporation CK804 USB Controller [10de:005a] (rev a2) (prog-if 10 [OHCI])
    Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 (750ns min, 250ns max)
    Interrupt: pin A routed to IRQ 22
    Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
    Capabilities:
    Kernel driver in use: ohci_hcd
    Kernel modules: ohci-hcd

    00:02.1 USB Controller [0c03]: nVidia Corporation CK804 USB Controller [10de:005b] (rev a3) (prog-if 20 [EHCI])
    Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 (750ns min, 250ns max)
    Interrupt: pin B routed to IRQ 23
    Region 0: Memory at feb00000 (32-bit, non-prefetchable) [size=256]
    Capabilities:
    Kernel driver in use: ehci_hcd
    Kernel modules: ehci-hcd

    00:04.0 Multimedia audio controller [0401]: nVidia Corporation CK804 AC'97 Audio Controller [10de:0059] (rev a2)
    Subsystem: ASUSTeK Computer Inc. Unknown device [1043:822c]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 (500ns min, 1250ns max)
    Interrupt: pin A routed to IRQ 22
    Region 0: I/O ports at f000 [size=256]
    Region 1: I/O ports at ec00 [size=256]
    Region 2: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
    Capabilities:
    Kernel driver in use: Intel ICH
    Kernel modules: snd-intel8x0

    00:06.0 IDE interface [0101]: nVidia Corporation CK804 IDE [10de:0053] (rev f2) (prog-if 8a [Master SecP PriP])
    Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 (750ns min, 250ns max)
    Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
    Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
    Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
    Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
    Region 4: I/O ports at e800 [size=16]
    Capabilities:
    Kernel driver in use: AMD_IDE
    Kernel modules: ata_generic, generic, amd74xx

    00:07.0 IDE interface [0101]: nVidia Corporation CK804 Serial ATA Controller [10de:0054] (rev f3) (prog-if 85 [Master SecO PriO])
    Subsystem: ASUSTeK Computer Inc. A8N-E Mainboard [1043:815a]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 (750ns min, 250ns max)
    Interrupt: pin A routed to IRQ 20
    Region 0: I/O ports at 09f0 [size=8]
    Region 1: I/O ports at 0bf0 [size=4]
    Region 2: I/O ports at 0970 [size=8]
    Region 3: I/O ports at 0b70 [size=4]
    Region 4: I/O ports at d400 [size=16]
    Region 5: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
    Capabilities:
    Kernel driver in use: sata_nv
    Kernel modules: ata_generic, sata_nv, generic

    00:08.0 IDE interface [0101]: nVidia Corporation CK804 Serial ATA Controller [10de:0055] (rev f3) (prog-if 85 [Master SecO PriO])
    Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 (750ns min, 250ns max)
    Interrupt: pin A routed to IRQ 23
    Region 0: I/O ports at 09e0 [size=8]
    Region 1: I/O ports at 0be0 [size=4]
    Region 2: I/O ports at 0960 [size=8]
    Region 3: I/O ports at 0b60 [size=4]
    Region 4: I/O ports at c000 [size=16]
    Region 5: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
    Capabilities:
    Kernel driver in use: sata_nv
    Kernel modules: ata_generic, sata_nv, generic

    00:09.0 PCI bridge [0604]: nVidia Corporation CK804 PCI Bridge [10de:005c] (rev f2) (prog-if 01 [Subtractive decode])
    Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=128
    Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-

    00:0a.0 Bridge [0680]: nVidia Corporation CK804 Ethernet Controller [10de:0057] (rev f3)
    Subsystem: ASUSTeK Computer Inc. Unknown device [1043:812a]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 (250ns min, 5000ns max)
    Interrupt: pin A routed to IRQ 21
    Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
    Region 1: I/O ports at bc00 [size=8]
    Capabilities:
    Kernel driver in use: forcedeth
    Kernel modules: forcedeth

    00:0b.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev f3) (prog-if 00 [Normal decode])
    Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities:
    Kernel driver in use: pcieport-driver
    Kernel modules: shpchp

    00:0c.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev f3) (prog-if 00 [Normal decode])
    Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities:
    Kernel driver in use: pcieport-driver
    Kernel modules: shpchp

    00:0d.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev f3) (prog-if 00 [Normal decode])
    Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes
    Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities:
    Kernel driver in use: pcieport-driver
    Kernel modules: shpchp

    00:0e.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes
    Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
    I/O behind bridge: 0000a000-0000afff
    Memory behind bridge: fb000000-fdffffff
    Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities:
    Kernel driver in use: pcieport-driver
    Kernel modules: shpchp

    00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Capabilities:

    00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-
    00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-
    00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Capabilities:
    Kernel driver in use: k8temp
    Kernel modules: k8temp

    05:00.0 VGA compatible controller [0300]: nVidia Corporation G70 [GeForce 7600 GS] [10de:0392] (rev a1) (prog-if 00 [VGA controller])
    Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8231]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0
    Interrupt: pin A routed to IRQ 18
    Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
    Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
    Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
    Region 5: I/O ports at ac00 [size=128]
    [virtual] Expansion ROM at fdfe0000 [disabled] [size=128K]
    Capabilities:
    Kernel driver in use: nvidia
    Kernel modules: nvidia, nvidiafb



    -- System Information:
    Debian Release: lenny/sid
    APT prefers unstable
    APT policy: (500, 'unstable')
    Architecture: amd64 (x86_64)

    Kernel: Linux 2.6.24-1-amd64 (SMP w/2 CPU cores)
    Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
    Shell: /bin/sh linked to /bin/bash

    Versions of packages linux-image-2.6.24-1-amd64 depends on:
    ii debconf [debconf-2.0] 1.5.19 Debian configuration management sy
    ii initramfs-tools [linux-initr 0.91e tools for generating an initramfs
    ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo

    linux-image-2.6.24-1-amd64 recommends no packages.

    -- debconf information excluded



    --
    To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

  2. Bug#466719: linux-image-2.6.24-1-amd64: sometimes doesn't join multicast groups, breaks IPv6

    On Wed, Feb 20, 2008 at 04:23:10PM +0100, weinholt@debian.org wrote:
    > Package: linux-image-2.6.24-1-amd64
    > Version: 2.6.24-4
    > Severity: important
    >
    > After booting there will be multicast addresses missing on eth0.
    > Sometimes 33:33:00:00:00:01 is missing and I will not receive router
    > advertisements, other times 33:33:ff:81:16:3a is missing and neighbor
    > discovery breaks instead. There was a similar problem in bug #410375.


    Can you test this image and see if it fixes the problem for you?
    http://people.debian.org/~dannf/bugs/466719/

    --
    dann frazier




    --
    To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

  3. Bug#466719: marked as done (linux-image-2.6.24-1-amd64: sometimes doesn't join multicast groups, breaks IPv6)


    Your message dated Thu, 27 Mar 2008 16:02:27 +0000
    with message-id
    and subject line Bug#466719: fixed in linux-2.6 2.6.24-5
    has caused the Debian Bug report #466719,
    regarding linux-image-2.6.24-1-amd64: sometimes doesn't join multicast groups, breaks IPv6
    to be marked as done.

    This means that you claim that the problem has been dealt with.
    If this is not the case it is now your responsibility to reopen the
    Bug report if necessary, and/or fix the problem forthwith.

    (NB: If you are a system administrator and have no idea what this
    message is talking about, this may indicate a serious mail system
    misconfiguration somewhere. Please contact owner@bugs.debian.org
    immediately.)


    --
    466719: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=466719
    Debian Bug Tracking System
    Contact owner@bugs.debian.org with problems


+ Reply to Thread