Bug#463788: b43legacy oopses - Debian

This is a discussion on Bug#463788: b43legacy oopses - Debian ; Package: linux-image-2.6.24-1-powerpc Version: 2.6.24-2 Severity: normal Hi, The "b43legacy" driver produces an oops on my system (an Apple PowerBook G4, 1.3Ghz). Please see the kernel dmesg output below for details. (or ask me, if that's not enough...) -- Package-specific info: ...

+ Reply to Thread
Results 1 to 2 of 2

Thread: Bug#463788: b43legacy oopses

  1. Bug#463788: b43legacy oopses

    Package: linux-image-2.6.24-1-powerpc
    Version: 2.6.24-2
    Severity: normal

    Hi,

    The "b43legacy" driver produces an oops on my system (an Apple PowerBook
    G4, 1.3Ghz). Please see the kernel dmesg output below for details.

    (or ask me, if that's not enough...)

    -- Package-specific info:
    ** Version:
    Linux version 2.6.24-1-powerpc (Debian 2.6.24-2) (waldi@debian.org) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 Thu Jan 31 18:52:10 CET 2008

    ** Command line:
    root=/dev/hda5 ro resume=/dev/hda3

    ** Tainted: G (128)

    ** Kernel log:
    b43-phy0: Broadcom 4306 WLAN found
    phy0: Selected rate control algorithm 'simple'
    udev: renamed network interface wmaster0 to eth1
    Adding 1009972k swap on /dev/hda3. Priority:-1 extents:1 across:1009972k
    EXT3 FS on hda5, internal journal
    input: PowerMac Beep as /class/input/input7
    adt746x: version 1 (supported)
    adt746x: Thermostat bus: 1, address: 0x2e, limit_adjust: 0, fan_speed: -1
    sensor 0: HDD BOTTOMSIDE
    sensor 1: CPU TOPSIDE
    sensor 2: GPU ON DIE
    adt746x: ADT7460 initializing
    adt746x: Lowering max temperatures from 73, 80, 109 to 70, 50, 70
    device-mapper: uevent: version 1.0.3
    device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
    hfs: write access to a jounaled filesystem is not supported, use the force option at your own risk, mounting read-only.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    lp: driver loaded but no devices found
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
    NFSD: starting 90-second grace period
    hda: host max PIO4 wanted PIO0 selected PIO0
    Bluetooth: Core ver 2.11
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    usb 1-1: USB disconnect, address 2
    Bluetooth: L2CAP ver 2.9
    Bluetooth: L2CAP socket layer initialized
    usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -108
    Bluetooth: RFCOMM socket layer initialized
    Bluetooth: RFCOMM TTY layer initialized
    Bluetooth: RFCOMM ver 1.8
    usb 1-1: new full speed USB device using ohci_hcd and address 3
    usb 1-1: configuration #1 chosen from 1 choice
    Bluetooth: HCI USB driver ver 2.9
    usbcore: registered new interface driver hci_usb
    hda: host max PIO4 wanted PIO0 selected PIO0
    hda: host max PIO4 wanted PIO0 selected PIO0
    hda: host max PIO4 wanted PIO0 selected PIO0
    hda: host max PIO4 wanted PIO0 selected PIO0
    hda: host max PIO4 wanted PIO0 selected PIO0
    hda: host max PIO4 wanted PIO0 selected PIO0
    hda: host max PIO4 wanted PIO0 selected PIO0
    hda: host max PIO4 wanted PIO0 selected PIO0
    hda: host max PIO4 wanted PIO0 selected PIO0
    usb 2-1: new low speed USB device using ohci_hcd and address 2
    usb 2-1: configuration #1 chosen from 1 choice
    input: Logitech Optical USB Mouse as /class/input/input8
    input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0001:10:1b.0-1
    hda: host max PIO4 wanted PIO0 selected PIO0
    hda: host max PIO4 wanted PIO0 selected PIO0
    b43-phy1: Broadcom 4306 WLAN found
    phy1: Selected rate control algorithm 'simple'
    udev: renamed network interface wmaster0 to eth1
    input: b43-phy1 as /class/input/input9
    b43-phy1 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
    b43-phy1 ERROR: You must go to http://linuxwireless.org/en/users/Dr...devicefirmware and download the correct firmware (version 4).
    input: b43-phy1 as /class/input/input10
    b43-phy1 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
    b43-phy1 ERROR: You must go to http://linuxwireless.org/en/users/Dr...devicefirmware and download the correct firmware (version 4).
    input: b43-phy1 as /class/input/input11
    b43-phy1 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
    b43-phy1 ERROR: You must go to http://linuxwireless.org/en/users/Dr...devicefirmware and download the correct firmware (version 4).
    hda: host max PIO4 wanted PIO0 selected PIO0
    eth0: Link is up at 100 Mbps, half-duplex.
    eth0: Pause is disabled
    ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    eth0: Link is up at 100 Mbps, half-duplex.
    eth0: Pause is disabled
    hda: host max PIO4 wanted PIO0 selected PIO0
    Unable to handle kernel paging request for instruction fetch
    Faulting instruction address: 0xf6253b14
    Oops: Kernel access of bad area, sig: 11 [#1]
    PowerMac
    Modules linked in: rfkill_input binfmt_misc hci_usb rfcomm l2cap bluetooth nfsd exportfs lp parport autofs4 ipv6 rpcsec_gss_krb5 auth_rpcgss nfs lockd nfs_acl sunrpc nls_utf8 hfsplus dm_crypt dm_mirror cpufreq_conservative cpufreq_ondemand cpufreq_powersave dm_snapshot dm_mod therm_adt746x snd_powermac cpufreq_userspace snd_aoa_i2sbus snd_pcm_oss snd_pcm snd_page_alloc snd_mixer_oss snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event arc4 snd_seq snd_timer snd_seq_device ecb blkcipher snd soundcore snd_aoa_soundbus rfkill uninorth_agp agpgart mac80211 evdev cfg80211 input_polldev ext3 jbd mbcache firewire_ohci sungem sungem_phy firewire_core crc_itu_t ide_disk ehci_hcd usbhid ide_cd hid ff_memless cdrom ssb pcmcia pcmcia_core firmware_class i2c_powermac
    NIP: f6253b14 LR: f2088158 CTR: f6253b14
    REGS: ee7ffeb0 TRAP: 0400 Not tainted (2.6.24-1-powerpc)
    MSR: 40009032 CR: 24000084 XER: 00000000
    TASK = ef912f30[10060] 'ipolldevd' THREAD: ee7fe000
    GPR00: f6253b14 ee7fff60 ef912f30 eefca6a0 ee7fffa8 00000001 00005ec0 0000039e
    GPR08: ee7fffb4 ee968760 eefca6b8 ffffffff 00000000 00000000 00000000 00000000
    GPR16: 00000000 00000000 00000000 00000000 00000000 016ecff8 41400000 016eeea0
    GPR24: 00000000 003f1000 c03ac4b0 eefca6b4 c03b0000 eefca6a0 f2088130 ee968760
    NIP [f6253b14] 0xf6253b14
    LR [f2088158] input_polled_device_work+0x28/0x5c [input_polldev]
    Call Trace:
    [ee7fff60] [c0008a28] __switch_to+0x74/0x8c (unreliable)
    [ee7fff80] [c0042268] run_workqueue+0xb4/0x148
    [ee7fffa0] [c0042834] worker_thread+0xd8/0xf4
    [ee7fffd0] [c0046844] kthread+0x4c/0x88
    [ee7ffff0] [c0013404] kernel_thread+0x44/0x60
    Instruction dump:
    XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
    XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
    ---[ end trace c82e7ba47a431aec ]---

    ** Loaded modules:
    Module Size Used by
    rfkill_input 4800 0
    binfmt_misc 13256 1
    hci_usb 16796 2
    rfcomm 45524 5
    l2cap 25956 9 rfcomm
    bluetooth 67916 7 hci_usb,rfcomm,l2cap
    nfsd 248404 13
    exportfs 5248 1 nfsd
    lp 13548 0
    parport 43472 1 lp
    autofs4 24932 1
    ipv6 295860 41
    rpcsec_gss_krb5 10760 0
    auth_rpcgss 48260 2 nfsd,rpcsec_gss_krb5
    nfs 294856 0
    lockd 77752 3 nfsd,nfs
    nfs_acl 4032 2 nfsd,nfs
    sunrpc 213516 12 nfsd,rpcsec_gss_krb5,auth_rpcgss,nfs,lockd,nfs_acl
    nls_utf8 2208 1
    hfsplus 92516 1
    dm_crypt 16836 0
    dm_mirror 25728 0
    cpufreq_conservative 8864 0
    cpufreq_ondemand 9544 0
    cpufreq_powersave 1824 0
    dm_snapshot 21184 0
    dm_mod 70180 3 dm_crypt,dm_mirror,dm_snapshot
    therm_adt746x 13612 0
    snd_powermac 48416 2
    cpufreq_userspace 4760 1
    snd_aoa_i2sbus 24388 0
    snd_pcm_oss 49216 1
    snd_pcm 92100 3 snd_powermac,snd_aoa_i2sbus,snd_pcm_oss
    snd_page_alloc 11912 1 snd_pcm
    snd_mixer_oss 20384 1 snd_pcm_oss
    snd_seq_oss 39700 0
    snd_seq_midi 9600 0
    snd_rawmidi 28352 1 snd_seq_midi
    snd_seq_midi_event 8160 2 snd_seq_oss,snd_seq_midi
    arc4 1984 0
    snd_seq 61064 5 snd_seq_oss,snd_seq_midi,snd_seq_midi_event
    snd_timer 26180 2 snd_pcm,snd_seq
    snd_seq_device 9452 4 snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
    ecb 4064 0
    blkcipher 8388 1 ecb
    snd 67668 12 snd_powermac,snd_aoa_i2sbus,snd_pcm_oss,snd_pcm,sn d_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_ti mer,snd_seq_device
    soundcore 8900 2 snd
    snd_aoa_soundbus 7620 1 snd_aoa_i2sbus
    rfkill 9008 4 rfkill_input
    uninorth_agp 11692 1
    agpgart 40156 1 uninorth_agp
    mac80211 143486 0
    evdev 13984 17
    cfg80211 16688 1 mac80211
    input_polldev 5832 0
    ext3 156328 1
    jbd 56212 1 ext3
    mbcache 9568 1 ext3
    firewire_ohci 22464 0
    sungem 35268 0
    sungem_phy 12928 1 sungem
    firewire_core 49912 1 firewire_ohci
    crc_itu_t 2112 1 firewire_core
    ide_disk 18816 4
    ehci_hcd 38892 0
    usbhid 49252 0
    ide_cd 47108 0
    hid 44036 1 usbhid
    ff_memless 6184 1 usbhid
    cdrom 42812 1 ide_cd
    ssb 40132 0
    pcmcia 45872 1 ssb
    pcmcia_core 46904 1 pcmcia
    firmware_class 11104 1 pcmcia
    i2c_powermac 5984 0

    ** PCI devices:
    0000:00:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 AGP [106b:0034]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 16, Cache Line Size: 32 bytes
    Capabilities:
    Kernel driver in use: agpgart-uninorth
    Kernel modules: uninorth-agp

    0000:00:10.0 VGA compatible controller [0300]: nVidia Corporation NV34M [GeForce FX Go5200] [10de:0329] (rev a1) (prog-if 00 [VGA controller])
    Subsystem: nVidia Corporation Powerbook G4 [10de:0010]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 248 (1250ns min, 250ns max)
    Interrupt: pin A routed to IRQ 48
    Region 0: Memory at 91000000 (32-bit, non-prefetchable) [size=16M]
    Region 1: Memory at a0000000 (32-bit, prefetchable) [size=128M]
    Expansion ROM at 90000000 [disabled] [size=128K]
    Capabilities:
    Kernel driver in use: nvidiafb

    0001:10:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 PCI [106b:0035]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 16, Cache Line Size: 32 bytes
    Kernel modules: uninorth-agp

    0001:10:12.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03)
    Subsystem: Apple Computer Inc. AirPort Extreme [106b:004e]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 16
    Interrupt: pin A routed to IRQ 52
    Region 0: Memory at 80084000 (32-bit, non-prefetchable) [size=8K]
    Capabilities:
    Kernel driver in use: b43-pci-bridge
    Kernel modules: ssb

    0001:10:17.0 Unknown class [ff00]: Apple Computer Inc. KeyLargo/Intrepid Mac I/O [106b:003e]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 16, Cache Line Size: 32 bytes
    Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
    Kernel driver in use: macio

    0001:10:18.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI])
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin A routed to IRQ 27

    0001:10:19.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI])
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin A routed to IRQ 28

    0001:10:1a.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI])
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 16 (750ns min, 21500ns max), Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 29
    Region 0: Memory at 80083000 (32-bit, non-prefetchable) [size=4K]
    Kernel driver in use: ohci_hcd

    0001:10:1b.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
    Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 16 (250ns min, 10500ns max), Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 63
    Region 0: Memory at 80082000 (32-bit, non-prefetchable) [size=4K]
    Capabilities:
    Kernel driver in use: ohci_hcd

    0001:10:1b.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
    Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 16 (250ns min, 10500ns max), Cache Line Size: 32 bytes
    Interrupt: pin B routed to IRQ 63
    Region 0: Memory at 80081000 (32-bit, non-prefetchable) [size=4K]
    Capabilities:
    Kernel driver in use: ohci_hcd

    0001:10:1b.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20 [EHCI])
    Subsystem: NEC Corporation USB 2.0 [1033:00e0]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 16 (4000ns min, 8500ns max), Cache Line Size: 32 bytes
    Interrupt: pin C routed to IRQ 63
    Region 0: Memory at 80080000 (32-bit, non-prefetchable) [size=256]
    Capabilities:
    Kernel driver in use: ehci_hcd
    Kernel modules: ehci-hcd

    0002:20:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 Internal PCI [106b:0036]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 16, Cache Line Size: 32 bytes
    Kernel modules: uninorth-agp

    0002:20:0d.0 Unknown class [ff00]: Apple Computer Inc. UniNorth/Intrepid ATA/100 [106b:003b]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32, Cache Line Size: 32 bytes
    Interrupt: pin ? routed to IRQ 39
    Region 0: Memory at f5004000 (32-bit, non-prefetchable) [size=16K]
    Kernel driver in use: ide-pmac

    0002:20:0e.0 FireWire (IEEE 1394) [0c00]: Apple Computer Inc. UniNorth 2 FireWire [106b:0031] (rev 81) (prog-if 10 [OHCI])
    Subsystem: Apple Computer Inc. iBook G4 2004 [106b:5811]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 (3000ns min, 6000ns max), Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 40
    Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=4K]
    Capabilities:
    Kernel driver in use: firewire_ohci
    Kernel modules: firewire-ohci

    0002:20:0f.0 Ethernet controller [0200]: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) [106b:0032] (rev 80)
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- SERR- Latency: 16 (16000ns min, 16000ns max), Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 41
    Region 0: Memory at f5200000 (32-bit, non-prefetchable) [size=2M]
    Expansion ROM at f5100000 [disabled] [size=1M]
    Kernel driver in use: gem
    Kernel modules: sungem



    -- System Information:
    Debian Release: lenny/sid
    APT prefers unstable
    APT policy: (500, 'unstable'), (1, 'experimental')
    Architecture: powerpc (ppc)

    Kernel: Linux 2.6.24-1-powerpc
    Locale: LANG=nl_BE.UTF-8, LC_CTYPE=nl_BE.UTF-8 (charmap=UTF-8)
    Shell: /bin/sh linked to /bin/bash

    Versions of packages linux-image-2.6.24-1-powerpc depends on:
    ii debconf [debconf-2.0] 1.5.19 Debian configuration management sy
    ii initramfs-tools [linux-initr 0.91d tools for generating an initramfs
    ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo
    ii yaird [linux-initramfs-tool] 0.0.12-25 Yet Another mkInitRD

    linux-image-2.6.24-1-powerpc recommends no packages.

    -- debconf information:
    linux-image-2.6.24-1-powerpc/postinst/bootloader-test-error-2.6.24-1-powerpc:
    linux-image-2.6.24-1-powerpc/postinst/depmod-error-2.6.24-1-powerpc: false
    linux-image-2.6.24-1-powerpc/preinst/lilo-initrd-2.6.24-1-powerpc: true
    linux-image-2.6.24-1-powerpc/prerm/removing-running-kernel-2.6.24-1-powerpc: true
    linux-image-2.6.24-1-powerpc/preinst/initrd-2.6.24-1-powerpc:
    linux-image-2.6.24-1-powerpc/preinst/overwriting-modules-2.6.24-1-powerpc: true
    linux-image-2.6.24-1-powerpc/postinst/old-initrd-link-2.6.24-1-powerpc: true
    linux-image-2.6.24-1-powerpc/preinst/elilo-initrd-2.6.24-1-powerpc: true
    linux-image-2.6.24-1-powerpc/preinst/abort-overwrite-2.6.24-1-powerpc:
    linux-image-2.6.24-1-powerpc/preinst/bootloader-initrd-2.6.24-1-powerpc: true
    linux-image-2.6.24-1-powerpc/preinst/lilo-has-ramdisk:
    linux-image-2.6.24-1-powerpc/preinst/abort-install-2.6.24-1-powerpc:
    shared/kernel-image/really-run-bootloader: true
    linux-image-2.6.24-1-powerpc/preinst/failed-to-move-modules-2.6.24-1-powerpc:
    linux-image-2.6.24-1-powerpc/postinst/create-kimage-link-2.6.24-1-powerpc: true
    linux-image-2.6.24-1-powerpc/postinst/old-dir-initrd-link-2.6.24-1-powerpc: true
    linux-image-2.6.24-1-powerpc/prerm/would-invalidate-boot-loader-2.6.24-1-powerpc: true
    linux-image-2.6.24-1-powerpc/postinst/old-system-map-link-2.6.24-1-powerpc: true
    linux-image-2.6.24-1-powerpc/postinst/depmod-error-initrd-2.6.24-1-powerpc: false
    linux-image-2.6.24-1-powerpc/postinst/kimage-is-a-directory:
    linux-image-2.6.24-1-powerpc/postinst/bootloader-error-2.6.24-1-powerpc:



    --
    To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

  2. Bug#463788: b43legacy oopses

    On Sun, 03 Feb 2008, Wouter Verhelst wrote:

    > Package: linux-image-2.6.24-1-powerpc
    > Version: 2.6.24-2
    > Severity: normal
    >
    > Hi,
    >
    > The "b43legacy" driver produces an oops on my system (an Apple PowerBook
    > G4, 1.3Ghz). Please see the kernel dmesg output below for details.
    >
    > (or ask me, if that's not enough...)


    please recheck against 2.6.25 from sid?

    is it reproducible there?
    thanks

    --
    maks



    --
    To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

+ Reply to Thread