Bug#463104: badness at net/core/dev.c - Debian

This is a discussion on Bug#463104: badness at net/core/dev.c - Debian ; Package: linux-image-2.6.24-1-powerpc64 Version: 2.6.24-1 Severity: normal This report is from a Powermac G5 (machine: PowerMac7,3). Shortly after booting linux-image-2.6.24-1-powerpc64, the kernel throws the following message, but the network seems to continue to work. Badness at net/core/dev.c:2199 NIP: c0000000002ef828 LR: c0000000002ef808 ...

+ Reply to Thread
Results 1 to 2 of 2

Thread: Bug#463104: badness at net/core/dev.c

  1. Bug#463104: badness at net/core/dev.c

    Package: linux-image-2.6.24-1-powerpc64
    Version: 2.6.24-1
    Severity: normal

    This report is from a Powermac G5 (machine: PowerMac7,3).

    Shortly after booting linux-image-2.6.24-1-powerpc64, the kernel throws the
    following message, but the network seems to continue to work.

    Badness at net/core/dev.c:2199
    NIP: c0000000002ef828 LR: c0000000002ef808 CTR: c0000000002e8600
    REGS: c00000007b123640 TRAP: 0700 Not tainted (2.6.24-1-powerpc64)
    MSR: 9000000000029032 CR: 44ffff24 XER: 200fffff
    TASK = c00000007b0f6040[0] 'swapper' THREAD: c00000007b120000 CPU: 1
    GPR00: 0000000000000001 c00000007b1238c0 c000000000529ee0 000000000000004a
    GPR04: 00000000000005a8 00000000000005a8 0000000000000000 0000000000000010
    GPR08: 0000000000000013 c0000000005a93cc 0000000000000003 d000080083780000
    GPR12: d000000000315040 c000000000485980 00000000f8000000 0000000000000000
    GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
    GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
    GPR24: 0000000000000001 00000000ffff67d1 000000000000012c 0000000000000000
    GPR28: c0000000005fa1b0 0000000000000040 c0000000004dcca8 c0000000780fc748
    NIP [c0000000002ef828] .net_rx_action+0x114/0x280
    LR [c0000000002ef808] .net_rx_action+0xf4/0x280
    Call Trace:
    [c00000007b1238c0] [c0000000002ef808] .net_rx_action+0xf4/0x280 (unreliable)
    [c00000007b123970] [c00000000005e998] .__do_softirq+0xa8/0x164
    [c00000007b123a10] [c00000000000be4c] .do_softirq+0x4c/0x7c
    [c00000007b123a90] [c00000000005eb08] .irq_exit+0x60/0xb0
    [c00000007b123b10] [c00000000000c5d0] .do_IRQ+0xbc/0xec
    [c00000007b123b90] [c000000000004790] hardware_interrupt_entry+0x18/0x1c
    --- Exception: 501 at .cpu_idle+0x110/0x1f0
    LR = .cpu_idle+0x110/0x1f0
    [c00000007b123e80] [c000000000010fec] .cpu_idle+0x64/0x1f0 (unreliable)
    [c00000007b123f00] [c0000000000280ac] .start_secondary+0x164/0x188
    [c00000007b123f90] [c0000000000083c0] .start_secondary_prolog+0xc/0x10
    Instruction dump:
    7d6903a6 e8490008 e9690010 4e800421 e8410028 7f83e800 40bd0030 e93e82c8
    80090000 7c000034 5400d97e 78000020 <0b000000> 2fa00000 41be0010 e93e82c8

    Let me know about any other information you need,

    Mark

    -- Package-specific info:
    ** Version:
    Linux version 2.6.24-1-powerpc64 (Debian 2.6.24-1) (waldi@debian.org) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 SMP Sat Jan 26 12:02:02 CET 2008

    ** Command line:
    root=/dev/sda5 ro

    ** Not tainted

    ** Kernel log:
    Driver 'sd' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15
    sd 0:0:0:0: [sda] Attached SCSI disk
    usb 5-1.3: new low speed USB device using ehci_hcd and address 5
    usb 5-1.3: configuration #1 chosen from 1 choice
    eth0: Link is up at 1000 Mbps, full-duplex.
    usb 5-4.2: new full speed USB device using ehci_hcd and address 6
    usb 5-4.2: configuration #1 chosen from 1 choice
    usb 5-1.1.1: new low speed USB device using ehci_hcd and address 7
    usb 5-1.1.1: configuration #1 chosen from 1 choice
    usb 5-1.1.3: new full speed USB device using ehci_hcd and address 8
    usb 5-1.1.3: configuration #1 chosen from 1 choice
    hiddev0hidraw0: USB HID v1.11 Device [Apple Cinema Display] on usb-0001:02:0b.2-1.3
    hiddev1hidraw1: USB HID v1.11 Device [Apple Computer, Inc. Apple Cinema Display] on usb-0001:02:0b.2-4.2
    input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
    input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0001:02:0b.2-1.1.1
    input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input3
    input,hidraw3: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:02:0b.2-1.1.3
    input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input4
    input,hidraw4: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:02:0b.2-1.1.3
    usbcore: registered new interface driver usbhid
    drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    Linux agpgart interface v0.102
    agpgart: Detected Apple U3H chipset
    agpgart: configuring for size idx: 8
    agpgart: AGP aperture is 32M @ 0x0
    snd-aoa-fabric-layout: found bus with layout 36
    snd-aoa-fabric-layout: Using PMF GPIOs
    snd-aoa-codec-tas: found 'deq' node
    snd-aoa-fabric-layout: can use this codec
    snd-aoa-codec-tas: tas found, addr 0x35 on /ht@0,f2000000/pci@3/mac-io@7/i2c@18000/deq@6a
    EXT3 FS on sda5, internal journal
    snd-powermac no longer handles any machines with a layout-id property in the device-tree, use snd-aoa.
    device-mapper: uevent: version 1.0.3
    device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
    eth0: Link is up at 1000 Mbps, full-duplex.
    eth0: Pause is disabled
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    lp: driver loaded but no devices found
    [drm] Initialized drm 1.1.0 20060810
    [drm] Initialized radeon 1.28.0 20060524 on minor 0
    agpgart: Putting AGP V3 device at 0000:f0:0b.0 into 8x mode
    agpgart: Putting AGP V3 device at 0000:f0:10.0 into 8x mode
    [drm] Setting GART location based on new memory map
    [drm] Loading R300 Microcode
    [drm] writeback test succeeded in 1 usecs
    ioctl32(xfce4-terminal:4032): Unknown cmd fd(0) cmd(0000530b){t:'S';sz:0} arg(0fe7108c) on /dev/pts/0
    ioctl32(xfce4-terminal:4032): Unknown cmd fd(0) cmd(0000530b){t:'S';sz:0} arg(0fe71094) on /dev/pts/0
    ioctl32(xfce4-terminal:4032): Unknown cmd fd(0) cmd(0000530b){t:'S';sz:0} arg(0fe7109c) on /dev/pts/0
    ioctl32(xfce4-terminal:4126): Unknown cmd fd(0) cmd(0000530b){t:'S';sz:0} arg(0fe7108c) on /dev/pts/1
    ioctl32(xfce4-terminal:4126): Unknown cmd fd(0) cmd(0000530b){t:'S';sz:0} arg(0fe71094) on /dev/pts/1
    ioctl32(xfce4-terminal:4126): Unknown cmd fd(0) cmd(0000530b){t:'S';sz:0} arg(0fe7109c) on /dev/pts/1
    ioctl32(xfce4-terminal:4132): Unknown cmd fd(0) cmd(0000530b){t:'S';sz:0} arg(0fe7108c) on /dev/pts/2
    ioctl32(xfce4-terminal:4132): Unknown cmd fd(0) cmd(0000530b){t:'S';sz:0} arg(0fe71094) on /dev/pts/2
    ioctl32(xfce4-terminal:4132): Unknown cmd fd(0) cmd(0000530b){t:'S';sz:0} arg(0fe7109c) on /dev/pts/2
    ------------[ cut here ]------------
    Badness at net/core/dev.c:2199
    NIP: c0000000002ef828 LR: c0000000002ef808 CTR: c0000000002e8600
    REGS: c00000007b123640 TRAP: 0700 Not tainted (2.6.24-1-powerpc64)
    MSR: 9000000000029032 CR: 44ffff24 XER: 200fffff
    TASK = c00000007b0f6040[0] 'swapper' THREAD: c00000007b120000 CPU: 1
    GPR00: 0000000000000001 c00000007b1238c0 c000000000529ee0 000000000000004a
    GPR04: 00000000000005a8 00000000000005a8 0000000000000000 0000000000000010
    GPR08: 0000000000000013 c0000000005a93cc 0000000000000003 d000080083780000
    GPR12: d000000000315040 c000000000485980 00000000f8000000 0000000000000000
    GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
    GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
    GPR24: 0000000000000001 00000000ffff67d1 000000000000012c 0000000000000000
    GPR28: c0000000005fa1b0 0000000000000040 c0000000004dcca8 c0000000780fc748
    NIP [c0000000002ef828] .net_rx_action+0x114/0x280
    LR [c0000000002ef808] .net_rx_action+0xf4/0x280
    Call Trace:
    [c00000007b1238c0] [c0000000002ef808] .net_rx_action+0xf4/0x280 (unreliable)
    [c00000007b123970] [c00000000005e998] .__do_softirq+0xa8/0x164
    [c00000007b123a10] [c00000000000be4c] .do_softirq+0x4c/0x7c
    [c00000007b123a90] [c00000000005eb08] .irq_exit+0x60/0xb0
    [c00000007b123b10] [c00000000000c5d0] .do_IRQ+0xbc/0xec
    [c00000007b123b90] [c000000000004790] hardware_interrupt_entry+0x18/0x1c
    --- Exception: 501 at .cpu_idle+0x110/0x1f0
    LR = .cpu_idle+0x110/0x1f0
    [c00000007b123e80] [c000000000010fec] .cpu_idle+0x64/0x1f0 (unreliable)
    [c00000007b123f00] [c0000000000280ac] .start_secondary+0x164/0x188
    [c00000007b123f90] [c0000000000083c0] .start_secondary_prolog+0xc/0x10
    Instruction dump:
    7d6903a6 e8490008 e9690010 4e800421 e8410028 7f83e800 40bd0030 e93e82c8
    80090000 7c000034 5400d97e 78000020 <0b000000> 2fa00000 41be0010 e93e82c8
    ioctl32(xfce4-terminal:4370): Unknown cmd fd(0) cmd(0000530b){t:'S';sz:0} arg(0fe7108c) on /dev/pts/3
    ioctl32(xfce4-terminal:4370): Unknown cmd fd(0) cmd(0000530b){t:'S';sz:0} arg(0fe71094) on /dev/pts/3
    ioctl32(xfce4-terminal:4370): Unknown cmd fd(0) cmd(0000530b){t:'S';sz:0} arg(0fe7109c) on /dev/pts/3

    ** Loaded modules:
    Module Size Used by
    radeon 172384 2
    drm 146672 3 radeon
    lp 22732 0
    parport 63400 1 lp
    nfs 391480 8
    lockd 108272 1 nfs
    nfs_acl 9640 1 nfs
    sunrpc 284488 19 nfs,lockd,nfs_acl
    dm_snapshot 33144 0
    dm_mirror 39588 0
    dm_mod 102632 2 dm_snapshot,dm_mirror
    snd_powermac 86696 0
    ide_disk 28912 0
    snd_aoa_codec_tas 25200 2
    snd_aoa_fabric_layout 23048 2
    snd_aoa 31716 2 snd_aoa_codec_tas,snd_aoa_fabric_layout
    snd_aoa_i2sbus 37340 1
    snd_aoa_soundbus 14876 2 snd_aoa_fabric_layout,snd_aoa_i2sbus
    snd_pcm_oss 69784 0
    snd_mixer_oss 31056 1 snd_pcm_oss
    snd_pcm 135548 4 snd_powermac,snd_aoa_i2sbus,snd_pcm_oss
    snd_page_alloc 19648 1 snd_pcm
    snd_timer 40904 2 snd_pcm
    snd 99680 11 snd_powermac,snd_aoa_codec_tas,snd_aoa_fabric_layo ut,snd_aoa,snd_aoa_i2sbus,snd_pcm_oss,snd_mixer_os s,snd_pcm,snd_timer
    soundcore 16240 1 snd
    uninorth_agp 19464 1
    agpgart 57292 2 drm,uninorth_agp
    evdev 23680 2
    ext3 201272 1
    jbd 83880 1 ext3
    mbcache 18164 1 ext3
    sd_mod 43112 2
    ata_generic 14380 0
    sata_svw 18204 1
    libata 213136 2 ata_generic,sata_svw
    scsi_mod 233776 2 sd_mod,libata
    usbhid 67440 0
    hid 55608 1 usbhid
    ff_memless 12872 1 usbhid
    generic 10484 0 [permanent]
    ehci_hcd 58460 0
    sungem 56788 0
    sungem_phy 22704 1 sungem
    ide_cd 60296 0
    cdrom 51448 1 ide_cd
    firewire_ohci 37520 0
    firewire_core 71100 1 firewire_ohci
    crc_itu_t 6832 1 firewire_core
    windfarm_pid 8432 0
    therm_pm72 40060 0
    i2c_powermac 12432 0

    ** PCI devices:
    0000:f0:0b.0 Host bridge [0600]: Apple Computer Inc. U3H AGP Bridge [106b:0059]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 16, Cache Line Size: 32 bytes
    Capabilities: [80] AGP version 3.0
    Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans+ 64bit+ FW+ AGP3+ Rate=x4,x8
    Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit+ FW- Rate=x8

    0000:f0:10.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 AR [Radeon 9600] [1002:4152] (prog-if 00 [VGA])
    Subsystem: ATI Technologies Inc RV350 AR [Radeon 9600] [1002:4152]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 16 (2000ns min), Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 48
    Region 0: Memory at a0000000 (32-bit, prefetchable) [size=256M]
    Region 1: I/O ports at 0400 [size=256]
    Region 2: Memory at 90000000 (32-bit, non-prefetchable) [size=64K]
    Expansion ROM at 90020000 [disabled] [size=128K]
    Capabilities: [58] AGP version 3.0
    Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
    Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    0001:00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge [1022:7450] (rev 12) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32
    Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
    Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
    Capabilities: [a0] PCI-X bridge device
    Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=100MHz
    Status: Dev=00:01.0 64bit+ 133MHz+ SCD- USC- SCO- SRD-
    Upstream: Capacity=14 CommitmentLimit=65535
    Downstream: Capacity=2 CommitmentLimit=65535
    Capabilities: [b8] HyperTransport: Interrupt Discovery and Configuration
    Capabilities: [c0] HyperTransport: Slave or Primary Interface
    !!! Possibly incomplete decoding
    Command: BaseUnitID=1 UnitCnt=2 MastHost- DefDir-
    Link Control 0: CFlE+ CST- CFE- Link Config 0: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
    Link Control 1: CFlE- CST- CFE- Link Config 1: MLWI=8bit MLWO=8bit LWI=8bit LWO=8bit
    Revision ID: 1.02

    0001:00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge [1022:7450] (rev 12) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32
    Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
    Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
    Capabilities: [a0] PCI-X bridge device
    Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
    Status: Dev=00:02.0 64bit+ 133MHz+ SCD- USC- SCO- SRD-
    Upstream: Capacity=14 CommitmentLimit=65535
    Downstream: Capacity=2 CommitmentLimit=65535
    Capabilities: [b8] HyperTransport: Interrupt Discovery and Configuration

    0001:00:03.0 PCI bridge [0604]: Apple Computer Inc. K2 HT-PCI Bridge [106b:0045] (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
    Memory behind bridge: 80000000-800fffff
    Prefetchable memory behind bridge: 00000000-000fffff
    Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
    Capabilities: [70] HyperTransport: Slave or Primary Interface
    Command: BaseUnitID=3 UnitCnt=5 MastHost- DefDir- DUL-
    Link Control 0: CFlE- CST- CFE- Link Config 0: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
    Link Control 1: CFlE- CST- CFE- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
    Revision ID: 1.04
    Link Frequency 0: 400MHz
    Link Error 0: Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
    Feature Capability: IsocFC- LDTSTOP+ CRCTM+ ECTLT- 64bA- UIDRD-
    Link Frequency 1: 200MHz
    Link Error 1: Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
    Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
    Prefetchable memory behind bridge Upper: 00-00
    Bus Number: 00
    Capabilities: [90] HyperTransport: Interrupt Discovery and Configuration

    0001:00:04.0 PCI bridge [0604]: Apple Computer Inc. K2 HT-PCI Bridge [106b:0046] (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
    Memory behind bridge: 80100000-801fffff
    Prefetchable memory behind bridge: 00000000-000fffff
    Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
    Capabilities: [70] HyperTransport: Revision ID: 1.04

    0001:00:05.0 PCI bridge [0604]: Apple Computer Inc. K2 HT-PCI Bridge [106b:0047] (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
    Memory behind bridge: 80200000-802fffff
    Prefetchable memory behind bridge: 00000000-000fffff
    Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
    Capabilities: [70] HyperTransport: Revision ID: 1.04

    0001:00:06.0 PCI bridge [0604]: Apple Computer Inc. K2 HT-PCI Bridge [106b:0048] (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
    Memory behind bridge: 80300000-805fffff
    Prefetchable memory behind bridge: 00000000-000fffff
    Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
    Capabilities: [70] HyperTransport: Revision ID: 1.04

    0001:00:07.0 PCI bridge [0604]: Apple Computer Inc. K2 HT-PCI Bridge [106b:0049] (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
    Memory behind bridge: 80600000-806fffff
    Prefetchable memory behind bridge: 00000000-000fffff
    Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
    Capabilities: [70] HyperTransport: Revision ID: 1.04

    0001:01:07.0 Unknown class [ff00]: Apple Computer Inc. K2 KeyLargo Mac/IO [106b:0041] (rev 60)
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 16, Cache Line Size: 64 bytes
    Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]

    0001:01:08.0 USB Controller [0c03]: Apple Computer Inc. K2 KeyLargo USB [106b:0040] (prog-if 10 [OHCI])
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 16 (750ns min, 21500ns max), Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 27
    Region 0: Memory at 80081000 (32-bit, non-prefetchable) [size=4K]

    0001:01:09.0 USB Controller [0c03]: Apple Computer Inc. K2 KeyLargo USB [106b:0040] (prog-if 10 [OHCI])
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 16 (750ns min, 21500ns max), Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 28
    Region 0: Memory at 80080000 (32-bit, non-prefetchable) [size=4K]

    0001:02:0b.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
    Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 16 (250ns min, 10500ns max), Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 63
    Region 0: Memory at 80102000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [40] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    0001:02:0b.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
    Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 16 (250ns min, 10500ns max), Cache Line Size: 64 bytes
    Interrupt: pin B routed to IRQ 63
    Region 0: Memory at 80101000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [40] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    0001:02:0b.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20 [EHCI])
    Subsystem: NEC Corporation USB 2.0 [1033:00e0]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 16 (4000ns min, 8500ns max), Cache Line Size: 64 bytes
    Interrupt: pin C routed to IRQ 63
    Region 0: Memory at 80100000 (32-bit, non-prefetchable) [size=256]
    Capabilities: [40] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    0001:03:0d.0 Unknown class [ff00]: Apple Computer Inc. K2 ATA/100 [106b:0043]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32, Cache Line Size: 32 bytes
    Interrupt: pin ? routed to IRQ 39
    Region 0: Memory at 80204000 (32-bit, non-prefetchable) [size=16K]

    0001:03:0e.0 FireWire (IEEE 1394) [0c00]: Apple Computer Inc. K2 FireWire [106b:0042] (prog-if 10 [OHCI])
    Subsystem: Apple Computer Inc. Unknown device [106b:5811]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 248 (3000ns min, 6000ns max), Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 40
    Region 0: Memory at 80200000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [44] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME+

    0001:04:0f.0 Ethernet controller [0200]: Apple Computer Inc. K2 GMAC (Sun GEM) [106b:004c]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- SERR- Latency: 16 (16000ns min, 16000ns max), Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 41
    Region 0: Memory at 80400000 (32-bit, non-prefetchable) [size=2M]
    Expansion ROM at 80300000 [disabled] [size=1M]

    0001:05:0c.0 IDE interface [0101]: Broadcom K2 SATA [1166:0240] (prog-if 8f [Master SecP SecO PriP PriO])
    Subsystem: Broadcom K2 SATA [1166:0240]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 16
    Interrupt: pin ? routed to IRQ 17
    Region 0: I/O ports at [disabled]
    Region 1: I/O ports at [disabled]
    Region 2: I/O ports at [disabled]
    Region 3: I/O ports at [disabled]
    Region 4: I/O ports at [disabled]
    Region 5: Memory at 80600000 (32-bit, non-prefetchable) [size=8K]




    -- System Information:
    Debian Release: 4.0
    APT prefers stable
    APT policy: (990, 'stable'), (500, 'unstable'), (500, 'testing'), (1, 'experimental')
    Architecture: powerpc (ppc64)
    Shell: /bin/sh linked to /bin/bash
    Kernel: Linux 2.6.24-1-powerpc64
    Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)

    Versions of packages linux-image-2.6.24-1-powerpc64 depends on:
    ii debconf [debconf-2.0] 1.5.11etch1 Debian configuration management sy
    ii initramfs-tools [linux-initr 0.85h tools for generating an initramfs
    ii module-init-tools 3.3-pre4-2 tools for managing Linux kernel mo

    linux-image-2.6.24-1-powerpc64 recommends no packages.

    -- debconf information:
    linux-image-2.6.24-1-powerpc64/preinst/bootloader-initrd-2.6.24-1-powerpc64: true
    linux-image-2.6.24-1-powerpc64/preinst/abort-install-2.6.24-1-powerpc64:
    linux-image-2.6.24-1-powerpc64/postinst/bootloader-error-2.6.24-1-powerpc64:
    linux-image-2.6.24-1-powerpc64/postinst/kimage-is-a-directory:
    linux-image-2.6.24-1-powerpc64/preinst/overwriting-modules-2.6.24-1-powerpc64: true
    linux-image-2.6.24-1-powerpc64/preinst/initrd-2.6.24-1-powerpc64:
    linux-image-2.6.24-1-powerpc64/preinst/lilo-initrd-2.6.24-1-powerpc64: true
    linux-image-2.6.24-1-powerpc64/preinst/failed-to-move-modules-2.6.24-1-powerpc64:
    linux-image-2.6.24-1-powerpc64/prerm/removing-running-kernel-2.6.24-1-powerpc64: true
    shared/kernel-image/really-run-bootloader: true
    linux-image-2.6.24-1-powerpc64/postinst/old-dir-initrd-link-2.6.24-1-powerpc64: true
    linux-image-2.6.24-1-powerpc64/postinst/depmod-error-initrd-2.6.24-1-powerpc64: false
    linux-image-2.6.24-1-powerpc64/postinst/old-initrd-link-2.6.24-1-powerpc64: true
    linux-image-2.6.24-1-powerpc64/postinst/old-system-map-link-2.6.24-1-powerpc64: true
    linux-image-2.6.24-1-powerpc64/preinst/lilo-has-ramdisk:
    linux-image-2.6.24-1-powerpc64/postinst/create-kimage-link-2.6.24-1-powerpc64: true
    linux-image-2.6.24-1-powerpc64/postinst/depmod-error-2.6.24-1-powerpc64: false
    linux-image-2.6.24-1-powerpc64/postinst/bootloader-test-error-2.6.24-1-powerpc64:
    linux-image-2.6.24-1-powerpc64/preinst/abort-overwrite-2.6.24-1-powerpc64:
    linux-image-2.6.24-1-powerpc64/preinst/elilo-initrd-2.6.24-1-powerpc64: true
    linux-image-2.6.24-1-powerpc64/prerm/would-invalidate-boot-loader-2.6.24-1-powerpc64: true



    --
    To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

  2. Bug#463104: marked as done (badness at net/core/dev.c)


    Your message dated Tue, 13 May 2008 02:30:39 +0200
    with message-id <20080513003039.GJ11899@stro.at>
    and subject line Re: badness at net/core/dev.c
    has caused the Debian Bug report #463104,
    regarding badness at net/core/dev.c
    to be marked as done.

    This means that you claim that the problem has been dealt with.
    If this is not the case it is now your responsibility to reopen the
    Bug report if necessary, and/or fix the problem forthwith.

    (NB: If you are a system administrator and have no idea what this
    message is talking about, this may indicate a serious mail system
    misconfiguration somewhere. Please contact owner@bugs.debian.org
    immediately.)


    --
    463104: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=463104
    Debian Bug Tracking System
    Contact owner@bugs.debian.org with problems


+ Reply to Thread