Bug#458191: more info - Debian

This is a discussion on Bug#458191: more info - Debian ; If I open the device (eg cat /dev/ttyS0) the interrupt does show up. Still no data from the device on it. If I connect the device to an other serial port (e.g. an usb converter) I do see data so ...

+ Reply to Thread
Results 1 to 2 of 2

Thread: Bug#458191: more info

  1. Bug#458191: more info

    If I open the device (eg cat /dev/ttyS0) the interrupt does show up.
    Still no data from the device on it. If I connect the device to an other
    serial port (e.g. an usb converter) I do see data so I don't think the
    device connected is the problem.

    belle:/home/folkert# cat /proc/tty/driver/serial
    serinfo:1.0 driver revision:
    0: uart:16550A port:000003F8 irq:4 tx:157 rx:0 RTS|DTR
    1: uart:unknown port:000002F8 irq:3
    2: uart:unknown port:000003E8 irq:4
    3: uart:unknown port:000002E8 irq:3

    the motherboard (it is an on-board port) is a gigabyte 965G-DS3.

    I also tried an other device, nothing came in for that device too (known
    good device; right as we speak it works fine on an other system).


    Folkert van Heusden

    --
    MultiTail cok yonlu kullanimli bir program, loglari okumak, verilen
    kommandolari yerine getirebilen. Filter, renk verme, merge, 'diff-
    view', vs. http://www.vanheusden.com/multitail/
    ----------------------------------------------------------------------
    Phone: +31-6-41278122, PGP-key: 1F28D8AE, www.vanheusden.com



    --
    To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

  2. Bug#458191: more info

    More info: I also have another core2duo system, with 2 dualcore
    processor though. But this system has a motherboard with the same
    chipset: G965. And...it has the same problem! Serial port not
    functioning.

    On Sat, Dec 29, 2007 at 02:13:14PM +0100, Folkert van Heusden wrote:
    > If I open the device (eg cat /dev/ttyS0) the interrupt does show up.
    > Still no data from the device on it. If I connect the device to an other
    > serial port (e.g. an usb converter) I do see data so I don't think the
    > device connected is the problem.
    >
    > belle:/home/folkert# cat /proc/tty/driver/serial
    > serinfo:1.0 driver revision:
    > 0: uart:16550A port:000003F8 irq:4 tx:157 rx:0 RTS|DTR
    > 1: uart:unknown port:000002F8 irq:3
    > 2: uart:unknown port:000003E8 irq:4
    > 3: uart:unknown port:000002E8 irq:3
    >
    > the motherboard (it is an on-board port) is a gigabyte 965G-DS3.
    >
    > I also tried an other device, nothing came in for that device too (known
    > good device; right as we speak it works fine on an other system).
    >
    >
    > Folkert van Heusden
    >
    > --
    > MultiTail cok yonlu kullanimli bir program, loglari okumak, verilen
    > kommandolari yerine getirebilen. Filter, renk verme, merge, 'diff-
    > view', vs. http://www.vanheusden.com/multitail/
    > ----------------------------------------------------------------------
    > Phone: +31-6-41278122, PGP-key: 1F28D8AE, www.vanheusden.com



    Folkert van Heusden

    --
    Feeling generous? -> http://www.vanheusden.com/wishlist.php
    ----------------------------------------------------------------------
    Phone: +31-6-41278122, PGP-key: 1F28D8AE, www.vanheusden.com



    --
    To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

+ Reply to Thread