Package: linux-image-2.6.22-2-686
Version: 2.6.22-4
Severity: normal


When my system boots, it first says twice that the write cache for sda is enabled. Then it says once that it is
disabled.

What I'd like to get out of this bug report is to know if that last message is correct, and if so, why my
write cache is disabled.

johan@foo:/var/log$ dmesg|grep -B1 sda]
scsi 0:0:0:0: Direct-Access ATA WDC WD2500JS-60M 10.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
--
ata1: EH complete
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
johan@foo:/var/log$

Nothing else seems to be happening around that time:

johan@foo:/var/log$ grep -h " 20:30" *|sort|uniq|tail -n 30
grep: acpid: Åtkomst nekas
grep: acpid.1.gz: Åtkomst nekas
grep: acpid.2.gz: Åtkomst nekas
grep: acpid.3.gz: Åtkomst nekas
grep: acpid.4.gz: Åtkomst nekas
grep: auth.log~: Åtkomst nekas
grep: preload.log: Åtkomst nekas
grep: preload.log.1.gz: Åtkomst nekas
grep: preload.log.2.gz: Åtkomst nekas
grep: preload.log.3.gz: Åtkomst nekas
grep: preload.log.4.gz: Åtkomst nekas
Nov 27 20:30:15 foo kernel: lp0: using parport0 (interrupt-driven).
Nov 27 20:30:15 foo kernel: ppdev: user-space parallel port driver
Nov 27 20:30:19 foo ntpd[3532]: kernel time sync status change 0001
Nov 27 20:30:19 foo ntpd[3532]: synchronized to 81.216.247.88, stratum 1
Nov 27 20:30:19 foo ntpd[3532]: time reset +0.363076 s
Nov 27 20:30:19 foo sensord: Adapter: ISA adapter
Nov 27 20:30:19 foo sensord: Chip: smsc47b397-isa-0480
Nov 27 20:30:19 foo sensord: fan1: 1455.00
Nov 27 20:30:19 foo sensord: fan2: 82.00
Nov 27 20:30:19 foo sensord: fan3: 82.00
Nov 27 20:30:19 foo sensord: fan4: 1304.00
Nov 27 20:30:19 foo sensord: sensord started
Nov 27 20:30:19 foo sensord: temp1: 37.00
Nov 27 20:30:19 foo sensord: temp2: 25.00
Nov 27 20:30:19 foo sensord: temp3: 25.00
Nov 27 20:30:19 foo sensord: temp4: 0.00
Nov 27 20:30:19 foo sshd[3690]: Server listening on 0.0.0.0 port 22.
Nov 27 20:30:20 foo /usr/sbin/cron[3753]: (CRON) INFO (pidfile fd = 3)
Nov 27 20:30:20 foo /usr/sbin/cron[3754]: (CRON) INFO (Running @reboot jobs)
Nov 27 20:30:20 foo /usr/sbin/cron[3754]: (CRON) STARTUP (fork ok)
Nov 27 20:30:22 foo kernel: ata1.00: configured for UDMA/100
Nov 27 20:30:22 foo kernel: ata1: EH complete
Nov 27 20:30:22 foo kernel: sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
Nov 27 20:30:22 foo kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Nov 27 20:30:22 foo kernel: sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO
or FUA
Nov 27 20:30:22 foo kernel: sd 0:0:0:0: [sda] Write Protect is off
Nov 27 20:30:37 foo gdm[3617]: pam_unix(gdm:session): session opened for user johan by (uid=0)
Nov 27 20:30:49 foo hald: mounted /dev/hda on behalf of uid 1000
Nov 27 20:30:49 foo kernel: ISO 9660 Extensions: Microsoft Joliet Level 1
Nov 27 20:30:49 foo kernel: ISOFS: changing to secondary root
johan@foo:/var/log$ grep -ir reboot /etc/cron*
grep: /etc/cron.allow: Åtkomst nekas
/etc/cron.d/logcheck:# @reboot logcheck if [ -x /usr/sbin/logcheck ]; then nice -n10
/usr/sbin/logcheck -R; fi
/etc/cron.d/logcheck~:@reboot logcheck if [ -x /usr/sbin/logcheck ]; then nice -n10
/usr/sbin/logcheck -R; fi
/etc/cron.d/logcheck.dpkg-dist:@reboot logcheck if [ -x /usr/sbin/logcheck ]; then nice -n10
/usr/sbin/logcheck -R; fi

-- Package-specific info:
** Version:
Linux version 2.6.22-2-686 (Debian 2.6.22-4) (waldi@debian.org) (gcc version 4.1.3 20070812 (prerelease) (Debian 4.1.2-15)) #1 SMP Fri Aug 31 00:24:01 UTC 2007

** Not tainted

** Kernel log:
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 22, io base 0x00002060
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xe0a04000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
usb 2-1: new low speed USB device using uhci_hcd and address 2
ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 18 (level, low) -> IRQ 20
e100: eth1: e100_probe: addr 0xe0420000, irq 20, MAC addr 00:02:B3:94:C4:C0
ICH7: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 17 (level, low) -> IRQ 17
ICH7: chipset revision 1
ICH7: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x20a0-0x20a7, BIOS settings: hdaMA, hdbio
ide1: BM-DMA at 0x20a8-0x20af, BIOS settings: hdcio, hddio
Probing IDE interface ide0...
hda: HL-DT-STDVDRRW GWA-4166B, ATAPI CD/DVD-ROM drive
usb 2-1: new low speed USB device using uhci_hcd and address 3
hda: selected mode 0x43
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
usb 2-1: configuration #1 chosen from 1 choice
usb 2-2: new full speed USB device using uhci_hcd and address 4
hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(44)
Uniform CD-ROM driver Revision: 3.20
usb 2-2: configuration #1 chosen from 1 choice
usb 3-2: new low speed USB device using uhci_hcd and address 2
usb 3-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: A4Tech USB Optical Mouse as /class/input/input1
input: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:1d.1-1
input: Logitech Logitech Extreme 3D Pro as /class/input/input2
input: USB HID v1.10 Joystick [Logitech Logitech Extreme 3D Pro] on usb-0000:00:1d.2-2
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
floppy0: no floppy controllers found
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Real Time Clock Driver v1.12ac
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0xf860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
input: PC Speaker as /class/input/input3
intel_rng: Firmware space is locked read-only. <4>intel_rng: If you can't or
don't want to <4>intel_rng: disable this in firmware setup, and <4>intel_rng: if
you are certain that your <4>intel_rng: system has a functional
RNG, try<4>intel_rng: using the 'no_fwh_detect' option.
parport0: Printer, Brother HL-2070N series
cdc_acm 2-2:1.1: ttyACM0: USB ACM device
cdc_acm 2-2:1.3: ttyACM1: USB ACM device
cdc_acm 2-2:1.5: ttyACM2: USB ACM device
usbcore: registered new interface driver cdc_acm
drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1b.0 to 64
floppy0: no floppy controllers found
EXT3 FS on sda2, internal journal
smsc47b397: found SMSC SCH5307-NS (base address 0x0480, revision 0)
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
NTFS driver 2.1.28 [Flags: R/W MODULE].
NTFS volume version 3.1.
e100: eth1: e100_watchdog: link up, 10Mbps, half-duplex
PM: Writing back config space on device 0000:3f:00.0 at offset 1 (was 100406, writing 100006)
PM: Writing back config space on device 0000:3f:00.0 at offset 1 (was 100406, writing 100006)
PM: Writing back config space on device 0000:3f:00.0 at offset 1 (was 100406, writing 100006)
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
input: Power Button (FF) as /class/input/input4
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input5
ACPI: Power Button (CM) [PBTN]
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
ata1.00: configured for UDMA/100
ata1: EH complete
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
ISO 9660 Extensions: Microsoft Joliet Level 1
ISOFS: changing to secondary root

** Loaded modules:
Module Size Used by
isofs 32828 1
ppdev 8676 0
lp 10980 0
button 7920 0
ac 5188 0
battery 9988 0
acpi_cpufreq 9096 0
cpufreq_userspace 4128 0
cpufreq_stats 5120 0
cpufreq_powersave 1792 0
cpufreq_ondemand 8300 2
freq_table 4512 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
cpufreq_conservative 6888 0
ipt_MASQUERADE 3616 1
xt_tcpudp 3072 23
iptable_nat 7204 1
nf_nat 17964 2 ipt_MASQUERADE,iptable_nat
xt_state 2432 1
ipt_LOG 5952 4
nf_conntrack_ftp 9664 0
nf_conntrack_ipv4 17772 3 iptable_nat
nf_conntrack 60424 6 ipt_MASQUERADE,iptable_nat,nf_nat,xt_state,nf_conn track_ftp,nf_conntrack_ipv4
nfnetlink 5752 3 nf_nat,nf_conntrack_ipv4,nf_conntrack
iptable_filter 2944 1
ip_tables 12260 2 iptable_nat,iptable_filter
x_tables 14372 6 ipt_MASQUERADE,xt_tcpudp,iptable_nat,xt_state,ipt_ LOG,ip_tables
nls_iso8859_1 4128 2
ntfs 203968 1
dm_snapshot 16516 0
dm_mirror 20928 0
dm_mod 52160 2 dm_snapshot,dm_mirror
smsc47b397 6340 0
snd_hda_intel 239160 2
snd_pcm_oss 39200 1
snd_pcm 72324 2 snd_hda_intel,snd_pcm_oss
snd_mixer_oss 15424 1 snd_pcm_oss
snd_seq_dummy 3748 0
snd_seq_oss 29408 0
snd_seq_midi 8160 0
snd_rawmidi 22624 1 snd_seq_midi
snd_seq_midi_event 6880 2 snd_seq_oss,snd_seq_midi
snd_seq 46320 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event
snd_timer 21028 2 snd_pcm,snd_seq
snd_seq_device 7692 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi ,snd_seq
pcspkr 3104 0
cdc_acm 15136 0
parport_pc 33796 1
parport 33960 3 ppdev,lp,parport_pc
psmouse 36016 0
iTCO_wdt 9924 0
rtc 12856 0
evdev 9312 3
tsdev 7968 0
serio_raw 6692 0
joydev 9568 0
snd 48324 15 snd_hda_intel,snd_pcm_oss,snd_pcm,snd_mixer_oss,sn d_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_de vice
soundcore 7520 2 snd
snd_page_alloc 9512 2 snd_hda_intel,snd_pcm
ext3 121224 1
jbd 55336 1 ext3
mbcache 8260 1 ext3
ide_cd 36416 1
cdrom 32832 1 ide_cd
usbhid 25792 0
hid 25248 1 usbhid
piix 8868 0 [permanent]
generic 4836 0 [permanent]
ide_core 113764 3 ide_cd,piix,generic
e100 33644 0
mii 5280 1 e100
ehci_hcd 30796 0
ata_generic 7556 0
uhci_hcd 22960 0
usbcore 125096 5 cdc_acm,usbhid,ehci_hcd,uhci_hcd
tg3 100260 0
thermal 13416 0
processor 31016 2 acpi_cpufreq,thermal
fan 4836 0
sd_mod 27136 3
ahci 21380 2
libata 115664 2 ata_generic,ahci
scsi_mod 136620 2 sd_mod,libata

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 955X Express Memory Controller Hub [8086:2774]
Subsystem: Hewlett-Packard Company Unknown device [103c:3013]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0
Capabilities:

00:01.0 PCI bridge [0604]: Intel Corporation 955X Express PCI Express Root Port [8086:2775] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: e1000000-e31fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000e01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities:

00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: Hewlett-Packard Company Unknown device [103c:3013]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at e0a00000 (64-bit, non-prefetchable) [size=16K]
Capabilities:

00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities:

00:1c.4 PCI bridge [0604]: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 [8086:27e0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=28, subordinate=28, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities:

00:1c.5 PCI bridge [0604]: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 [8086:27e2] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=3f, subordinate=3f, sec-latency=0
Memory behind bridge: e0500000-e07fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities:

00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Unknown device [103c:3013]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
Interrupt: pin A routed to IRQ 19
Region 4: I/O ports at 2000 [size=32]

00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Unknown device [103c:3013]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
Interrupt: pin B routed to IRQ 20
Region 4: I/O ports at 2020 [size=32]

00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Unknown device [103c:3013]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
Interrupt: pin C routed to IRQ 21
Region 4: I/O ports at 2040 [size=32]

00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Unknown device [103c:3013]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
Interrupt: pin D routed to IRQ 22
Region 4: I/O ports at 2060 [size=32]

00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Unknown device [103c:3013]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: Memory at e0a04000 (32-bit, non-prefetchable) [size=1K]
Capabilities:

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
I/O behind bridge: 00001000-00001fff
Memory behind bridge: e0200000-e04fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities:

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
Subsystem: Hewlett-Packard Company Unknown device [103c:3013]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
Capabilities:

00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Unknown device [103c:3013]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 20a0 [size=16]

00:1f.2 SATA controller [0106]: Intel Corporation 82801GR/GH (ICH7 Family) Serial ATA Storage Controller AHCI [8086:27c1] (rev 01) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Unknown device [103c:3013]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
Interrupt: pin B routed to IRQ 219
Region 0: I/O ports at 20d0 [size=8]
Region 1: I/O ports at 20e8 [size=4]
Region 2: I/O ports at 20d8 [size=8]
Region 3: I/O ports at 20ec [size=4]
Region 4: I/O ports at 20b0 [size=16]
Region 5: Memory at e0a04400 (32-bit, non-prefetchable) [size=1K]
Capabilities:

01:00.0 VGA compatible controller [0300]: nVidia Corporation NV44 [Quadro NVS 285] [10de:0165] (rev a1) (prog-if 00 [VGA])
Subsystem: nVidia Corporation Unknown device [10de:029d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e1000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at e2000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at e0000000 [disabled] [size=128K]
Capabilities:

05:09.0 Ethernet controller [0200]: Intel Corporation 82557/8/9 [Ethernet Pro 100] [8086:1229] (rev 0d)
Subsystem: Intel Corporation EtherExpress PRO/100 S Server Adapter [8086:1050]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at e0420000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 1000 [size=64]
Region 2: Memory at e0400000 (32-bit, non-prefetchable) [size=128K]
Capabilities:

3f:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express [14e4:1600] (rev 01)
Subsystem: Hewlett-Packard Company Unknown device [103c:3013]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 218
Region 0: Memory at e0500000 (64-bit, non-prefetchable) [size=64K]
Capabilities:



-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (990, 'testing')
Architecture: i386 (i686)

Kernel: Linux 2.6.22-2-686 (SMP w/2 CPU cores)
Locale: LANG=sv_SE.UTF-8, LC_CTYPE=sv_SE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.22-2-686 depends on:
ii initramfs-tools [linux-initr 0.90a tools for generating an initramfs
ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.22-2-686 recommends:
ii libc6-i686 2.6.1-1+b1 GNU C Library: Shared libraries [i

-- debconf information:
linux-image-2.6.22-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.22-2-686/prerm/would-invalidate-boot-loader-2.6.22-2-686: true
linux-image-2.6.22-2-686/preinst/elilo-initrd-2.6.22-2-686: true
linux-image-2.6.22-2-686/preinst/abort-overwrite-2.6.22-2-686:
linux-image-2.6.22-2-686/preinst/lilo-initrd-2.6.22-2-686: true
linux-image-2.6.22-2-686/postinst/depmod-error-initrd-2.6.22-2-686: false
linux-image-2.6.22-2-686/preinst/overwriting-modules-2.6.22-2-686: true
linux-image-2.6.22-2-686/preinst/failed-to-move-modules-2.6.22-2-686:
linux-image-2.6.22-2-686/preinst/bootloader-initrd-2.6.22-2-686: true
linux-image-2.6.22-2-686/postinst/create-kimage-link-2.6.22-2-686: true
linux-image-2.6.22-2-686/postinst/bootloader-error-2.6.22-2-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.22-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.22-2-686/postinst/old-dir-initrd-link-2.6.22-2-686: true
linux-image-2.6.22-2-686/prerm/removing-running-kernel-2.6.22-2-686: true
linux-image-2.6.22-2-686/preinst/initrd-2.6.22-2-686:
linux-image-2.6.22-2-686/postinst/depmod-error-2.6.22-2-686: false
linux-image-2.6.22-2-686/preinst/already-running-this-2.6.22-2-686:
linux-image-2.6.22-2-686/postinst/old-initrd-link-2.6.22-2-686: true
linux-image-2.6.22-2-686/postinst/bootloader-test-error-2.6.22-2-686:
linux-image-2.6.22-2-686/preinst/abort-install-2.6.22-2-686:
linux-image-2.6.22-2-686/postinst/old-system-map-link-2.6.22-2-686: true



--
To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org