Subject: installation-reports: Debian GUI Installer
Package: installation-reports
Severity: wishlist

*** Please type your report below this line ***

-- Package-specific info:

Boot method: CD
Image version: http://ftp.osuosl.org/debian-cdimage...6-kde-CD-1.iso
Build date: 20070819-12:11
Date: 11/19/07

Machine: AMD K7-based home-built x86 workstation
1GB RAM; AGP 8x-based nVidia GeForce 6200 LE video card

Partitions:
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/hdb1 ext3 41286796 11115220 28074292 29% /
tmpfs tmpfs 518184 0 518184 0% /lib/init/rw
udev tmpfs 10240 140 10100 2% /dev
tmpfs tmpfs 518184 0 518184 0% /dev/shm
/dev/hdb2 ext3 10317860 3779180 6014560 39% /home
/dev/hda1 ntfs 57175300 31479404 25695896 56% /mnt/hda1
/dev/hda2 ext3 15615224 3185048 11636968 22% /mnt/hda2
/dev/hda3 ext3 5051900 609560 4442340 13% /mnt/hda3
/dev/hdb4 vfat 106586240 26064960 80521280 25% /mnt/hdb4


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [ ]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]

Comments/Problems:

and ideas you had during the initial install.>

NOTE: The installation completed successfully with no problems. So
this is _not_ a bug report.
It's more of a list of wishes and gripes. (You love reading
gripes, don't you?)

(I reinstalled Etch after some years of using Debian in order to get
rid of "cruft" in my /home
directory. I used existing partitions, and upgraded from Etch to
Testing immediately after
installation. I used the KDE CD, running the installer's "expertgui" mode.)

1. Why are the GUI-based installer and the ncurses-based installer
exactly the same? All the
GUI-based installer has over the text-based one is anti-aliased
fonts and mouse support. Does
it have to be this way? Why can't a GUI-based installer offer more
GUI-based tools? (See
#2.)

2. In keeping with #1, it would be very nice if the GUI installer
included a GUI-based partitioner,
even if it was nothing more than a call to gparted.

3. Ideally, the GUI installer should offer a graphical interface for
package selection, instead
of (in the case of the KDE CD) just dumping every package onto the
hard drive. Or perhaps
"in addition to". (See #4.)

4. The installer should prompt the user for additional media (i.e. CD
2, CD 3...) before package
installation commences, rather than making the user use "apt-cdrom" manually.

5. The installer allows you to load the ntfs driver, so it "sees" an
existing NTFS partition
during the partitioning/mounting step, but it doesn't allow the
user to set a mountpoint for
it (or create an fstab entry). That _is_ a bug.

6. The default fstab entry created for a FAT32 partition doesn't allow
a regular user write access
to it. That's also a bug.

It seems to me that the installer should offer the choice of
setting up an existing FAT32
partition for read/write access by a normal user, and also allow
for setting up an existing NTFS
partition for read-only access by a normal user.

I understand that this is Debian - i.e. "By the developers, for the
dvelopers" - and the end user
is expected to fend for himself. But IMO it's this user-unfriendly
lack of functionality
which drives people to use derivative distros like *buntu, Kanotix,
Sidux, etc. You've got the
installer to the point where X.org and KDE work with no further
user configuration needed.
Why stop there?


Thanks for listening. Happy holidays!
Andrew Heil
--

Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.

Once you have filled out this report, mail it to submit@bugs.debian.org.

==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="4.0 (installer build 20070308etch1)"
X_INSTALLATION_MEDIUM=cdrom

==============================================
Installer hardware-summary:
==============================================
umame -a: Linux bienvenue 2.6.18-5-486 #1 Fri Jun 1 00:07:22 UTC 2007
i686 unknown
lspci -nn: 00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8377
[KT400/KT600 AGP] Host Bridge [1106:3189] (rev 80)
lspci -nn: 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237
PCI Bridge [1106:b198]
lspci -nn: 00:0a.0 Multimedia audio controller [0401]: Creative Labs
SB Audigy [1102:0004] (rev 03)
lspci -nn: 00:0a.1 Input device controller [0980]: Creative Labs SB
Audigy Game Port [1102:7003] (rev 03)
lspci -nn: 00:0a.2 FireWire (IEEE 1394) [0c00]: Creative Labs SB
Audigy FireWire Port [1102:4001]
lspci -nn: 00:0c.0 Ethernet controller [0200]: Realtek Semiconductor
Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
lspci -nn: 00:0f.0 RAID bus controller [0104]: VIA Technologies, Inc.
VIA VT6420 SATA RAID Controller [1106:3149] (rev 80)
lspci -nn: 00:0f.1 IDE interface [0101]: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571]
(rev 06)
lspci -nn: 00:10.0 USB Controller [0c03]: VIA Technologies, Inc.
VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
lspci -nn: 00:10.1 USB Controller [0c03]: VIA Technologies, Inc.
VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
lspci -nn: 00:10.2 USB Controller [0c03]: VIA Technologies, Inc.
VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
lspci -nn: 00:10.3 USB Controller [0c03]: VIA Technologies, Inc.
VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
lspci -nn: 00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB
2.0 [1106:3104] (rev 86)
lspci -nn: 00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237
ISA bridge [KT600/K8T800/K8T890 South] [1106:3227]
lspci -nn: 00:12.0 Ethernet controller [0200]: VIA Technologies, Inc.
VT6102 [Rhine-II] [1106:3065] (rev 78)
lspci -nn: 01:00.0 VGA compatible controller [0300]: nVidia
Corporation Unknown device [10de:0222] (rev a1)
lspci -vnn: 00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8377
[KT400/KT600 AGP] Host Bridge [1106:3189] (rev 80)
lspci -vnn: Subsystem: ASRock Incorporation Unknown device [1849:3189]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 8
lspci -vnn: Memory at e0000000 (32-bit, prefetchable) [size=64M]
lspci -vnn: Capabilities: [80] AGP version 3.5
lspci -vnn: Capabilities: [c0] Power Management version 2
lspci -vnn:
lspci -vnn: 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237
PCI Bridge [1106:b198]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
lspci -vnn: Memory behind bridge: dbe00000-dfefffff
lspci -vnn: Prefetchable memory behind bridge: bbd00000-dbcfffff
lspci -vnn: Capabilities: [80] Power Management version 2
lspci -vnn:
lspci -vnn: 00:0a.0 Multimedia audio controller [0401]: Creative Labs
SB Audigy [1102:0004] (rev 03)
lspci -vnn: Subsystem: Creative Labs Unknown device [1102:0053]
lspci -vnn: Flags: bus master, medium devsel, latency 32, IRQ 3
lspci -vnn: I/O ports at d000 [size=32]
lspci -vnn: Capabilities: [dc] Power Management version 2
lspci -vnn:
lspci -vnn: 00:0a.1 Input device controller [0980]: Creative Labs SB
Audigy Game Port [1102:7003] (rev 03)
lspci -vnn: Subsystem: Creative Labs Unknown device [1102:0040]
lspci -vnn: Flags: bus master, medium devsel, latency 32
lspci -vnn: I/O ports at ec00 [size=8]
lspci -vnn: Capabilities: [dc] Power Management version 2
lspci -vnn:
lspci -vnn: 00:0a.2 FireWire (IEEE 1394) [0c00]: Creative Labs SB
Audigy FireWire Port [1102:4001] (prog-if 10)
lspci -vnn: Subsystem: Creative Labs Unknown device [1102:0010]
lspci -vnn: Flags: bus master, medium devsel, latency 32, IRQ 169
lspci -vnn: Memory at dfffb800 (32-bit, non-prefetchable) [size=2K]
lspci -vnn: Memory at dfff4000 (32-bit, non-prefetchable) [size=16K]
lspci -vnn: Capabilities: [44] Power Management version 2
lspci -vnn:
lspci -vnn: 00:0c.0 Ethernet controller [0200]: Realtek Semiconductor
Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
lspci -vnn: Subsystem: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ [10ec:8139]
lspci -vnn: Flags: bus master, medium devsel, latency 32, IRQ 193
lspci -vnn: I/O ports at cc00 [size=256]
lspci -vnn: Memory at dfffb700 (32-bit, non-prefetchable) [size=256]
lspci -vnn: Capabilities: [50] Power Management version 2
lspci -vnn:
lspci -vnn: 00:0f.0 RAID bus controller [0104]: VIA Technologies, Inc.
VIA VT6420 SATA RAID Controller [1106:3149] (rev 80)
lspci -vnn: Subsystem: ASRock Incorporation Unknown device [1849:3149]
lspci -vnn: Flags: bus master, medium devsel, latency 32, IRQ 177
lspci -vnn: I/O ports at e800 [size=8]
lspci -vnn: I/O ports at e400 [size=4]
lspci -vnn: I/O ports at e000 [size=8]
lspci -vnn: I/O ports at dc00 [size=4]
lspci -vnn: I/O ports at d800 [size=16]
lspci -vnn: I/O ports at d400 [size=256]
lspci -vnn: Capabilities: [c0] Power Management version 2
lspci -vnn:
lspci -vnn: 00:0f.1 IDE interface [0101]: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571]
(rev 06) (prog-if 8a [Master SecP PriP])
lspci -vnn: Subsystem: ASRock Incorporation Unknown device [1849:0571]
lspci -vnn: Flags: bus master, medium devsel, latency 32, IRQ 177
lspci -vnn: I/O ports at fc00 [size=16]
lspci -vnn: Capabilities: [c0] Power Management version 2
lspci -vnn:
lspci -vnn: 00:10.0 USB Controller [0c03]: VIA Technologies, Inc.
VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
lspci -vnn: Subsystem: ASRock Incorporation Unknown device [1849:3038]
lspci -vnn: Flags: bus master, medium devsel, latency 32, IRQ 185
lspci -vnn: I/O ports at bc00 [size=32]
lspci -vnn: Capabilities: [80] Power Management version 2
lspci -vnn:
lspci -vnn: 00:10.1 USB Controller [0c03]: VIA Technologies, Inc.
VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
lspci -vnn: Subsystem: ASRock Incorporation Unknown device [1849:3038]
lspci -vnn: Flags: bus master, medium devsel, latency 32, IRQ 185
lspci -vnn: I/O ports at c000 [size=32]
lspci -vnn: Capabilities: [80] Power Management version 2
lspci -vnn:
lspci -vnn: 00:10.2 USB Controller [0c03]: VIA Technologies, Inc.
VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
lspci -vnn: Subsystem: ASRock Incorporation Unknown device [1849:3038]
lspci -vnn: Flags: bus master, medium devsel, latency 32, IRQ 185
lspci -vnn: I/O ports at c400 [size=32]
lspci -vnn: Capabilities: [80] Power Management version 2
lspci -vnn:
lspci -vnn: 00:10.3 USB Controller [0c03]: VIA Technologies, Inc.
VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
lspci -vnn: Subsystem: ASRock Incorporation Unknown device [1849:3038]
lspci -vnn: Flags: bus master, medium devsel, latency 32, IRQ 185
lspci -vnn: I/O ports at c800 [size=32]
lspci -vnn: Capabilities: [80] Power Management version 2
lspci -vnn:
lspci -vnn: 00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB
2.0 [1106:3104] (rev 86) (prog-if 20)
lspci -vnn: Subsystem: ASRock Incorporation Unknown device [1849:3104]
lspci -vnn: Flags: bus master, medium devsel, latency 32, IRQ 185
lspci -vnn: Memory at dfffb500 (32-bit, non-prefetchable) [size=256]
lspci -vnn: Capabilities: [80] Power Management version 2
lspci -vnn:
lspci -vnn: 00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237
ISA bridge [KT600/K8T800/K8T890 South] [1106:3227]
lspci -vnn: Subsystem: ASRock Incorporation Unknown device [1849:3227]
lspci -vnn: Flags: bus master, stepping, medium devsel, latency 0
lspci -vnn: Capabilities: [c0] Power Management version 2
lspci -vnn:
lspci -vnn: 00:12.0 Ethernet controller [0200]: VIA Technologies, Inc.
VT6102 [Rhine-II] [1106:3065] (rev 78)
lspci -vnn: Subsystem: ASRock Incorporation Unknown device [1849:3065]
lspci -vnn: Flags: bus master, medium devsel, latency 32, IRQ 201
lspci -vnn: I/O ports at b800 [size=256]
lspci -vnn: Memory at dfffb400 (32-bit, non-prefetchable) [size=256]
lspci -vnn: Capabilities: [40] Power Management version 2
lspci -vnn:
lspci -vnn: 01:00.0 VGA compatible controller [0300]: nVidia
Corporation Unknown device [10de:0222] (rev a1)
lspci -vnn: Subsystem: eVga.com. Corp. Unknown device [3842:a295]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 11
lspci -vnn: Memory at de000000 (32-bit, non-prefetchable) [size=16M]
lspci -vnn: Memory at c0000000 (32-bit, prefetchable) [size=256M]
lspci -vnn: Memory at dd000000 (32-bit, non-prefetchable) [size=16M]
lspci -vnn: Expansion ROM at dfee0000 [disabled] [size=128K]
lspci -vnn: Capabilities: [60] Power Management version 2
lspci -vnn: Capabilities: [44] AGP version 3.0
lspci -vnn:
modulemap: 1102:4001 ohci1394
modulemap: 10ec:8139 8139too
modulemap: 1106:3149 sata_via
modulemap: 1106:0571 via82cxxx
modulemap: 1106:3038 uhci_hcd
modulemap: 1106:3038 uhci_hcd
modulemap: 1106:3038 uhci_hcd
modulemap: 1106:3038 uhci_hcd
modulemap: 1106:3104 ehci_hcd
modulemap: 1106:3065 via_rhine
lsmod: Module Size Used by
lsmod: qnx4 10612 0
lsmod: ntfs 184084 0
lsmod: nls_cp437 5760 1
lsmod: xfs 464756 0
lsmod: reiserfs 210432 0
lsmod: jfs 156380 0
lsmod: ext3 116488 4
lsmod: jbd 47272 1 ext3
lsmod: vfat 11392 1
lsmod: fat 45596 1 vfat
lsmod: via_rhine 21768 0
lsmod: 8139too 24192 0
lsmod: 8139cp 20736 0
lsmod: mii 5376 3 via_rhine,8139too,8139cp
lsmod: eth1394 17540 0
lsmod: nls_iso8859_1 4096 4
lsmod: sbp2 20232 0
lsmod: isofs 31544 0
lsmod: ide_generic 1280 0 [permanent]
lsmod: cs5520 4608 0 [permanent]
lsmod: atiixp 5776 0 [permanent]
lsmod: amd74xx 12956 0 [permanent]
lsmod: sc1200 6528 0 [permanent]
lsmod: piix 9092 0 [permanent]
lsmod: it821x 7684 0 [permanent]
lsmod: slc90e66 4992 0 [permanent]
lsmod: serverworks 8328 0 [permanent]
lsmod: siimage 10880 0 [permanent]
lsmod: pdc202xx_new 7808 0 [permanent]
lsmod: opti621 3972 0 [permanent]
lsmod: pdc202xx_old 9344 0 [permanent]
lsmod: hpt34x 4992 0 [permanent]
lsmod: trm290 3972 0 [permanent]
lsmod: aec62xx 6656 0 [permanent]
lsmod: alim15x3 11020 0 [permanent]
lsmod: cmd64x 9884 0 [permanent]
lsmod: ns87415 4168 0 [permanent]
lsmod: rz1000 2688 0 [permanent]
lsmod: sis5513 12296 0 [permanent]
lsmod: triflex 3712 0 [permanent]
lsmod: cs5530 4864 0 [permanent]
lsmod: jmicron 4096 0 [permanent]
lsmod: cy82c693 4356 0 [permanent]
lsmod: cs5535 4224 0 [permanent]
lsmod: sd_mod 18832 0
lsmod: usbmouse 5376 0
lsmod: vga16fb 11148 0
lsmod: vgastate 7680 1 vga16fb
lsmod: usbserial 28136 0
lsmod: usbhid 35552 0
lsmod: usbkbd 6656 0
lsmod: usb_storage 70848 0
lsmod: thermal 13320 0
lsmod: processor 23212 1 thermal
lsmod: fan 4740 0
lsmod: ide_cd 35360 0
lsmod: cdrom 32160 1 ide_cd
lsmod: ide_disk 14720 8
lsmod: parport_pc 31268 0
lsmod: parport 31816 1 parport_pc
lsmod: psmouse 34312 0
lsmod: floppy 51748 0
lsmod: ehci_hcd 26888 0
lsmod: sata_via 9988 0
lsmod: uhci_hcd 19980 0
lsmod: usbcore 108676 8
usbmouse,usbserial,usbhid,usbkbd,usb_storage,ehci_ hcd,uhci_hcd
lsmod: via82cxxx 8324 0 [permanent]
lsmod: generic 4740 0 [permanent]
lsmod: ide_core 107248 31
ide_generic,cs5520,atiixp,amd74xx,sc1200,piix,it82 1x,slc90e66,serverworks,siimage,pdc202xx_new,opti6 21,pdc202xx_old,hpt34x,trm290,aec62xx,alim15x3,cmd 64x,ns87415,rz1000,sis5513,triflex,cs5530,jmicron, cy82c693,cs5535,usb_storage,ide_cd,ide_disk,via82c xxx,generic
lsmod: libata 87316 1 sata_via
lsmod: ohci1394 29744 0
lsmod: scsi_mod 121352 4 sbp2,sd_mod,usb_storage,libata
lsmod: ieee1394 84408 3 eth1394,sbp2,ohci1394
lsmod: evdev 8832 2
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 453396 468 452928 0% /dev
df: tmpfs 453396 468 452928 0% /dev
df: tmpfs 453396 468 452928 0% /.dev
df: /dev/ide/host0/bus0/target1/lun0/part1 41286796 2161932
37027580 6% /target
df: /dev/ide/host0/bus0/target1/lun0/part2 10317860 154252
9639488 2% /target/home
df: /dev/ide/host0/bus0/target0/lun0/part2 15615224 3185048
11636968 21% /target/mnt/hda2
df: /dev/ide/host0/bus0/target0/lun0/part3 5051900 609560
4442340 12% /target/mnt/hda3
df: /dev/ide/host0/bus0/target1/lun0/part4 106586240 26064960
80521280 24% /target/mnt/hdb4
free: total used free shared buffers
free: Mem: 906792 855932 50860 0 61900
free: Swap: 1052248 464 1051784
free: Total: 1959040 856396 1102644
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 50: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 51: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : AuthenticAMD
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 10
/proc/cpuinfo: model name : AMD Athlon(tm) XP 2600+
/proc/cpuinfo: stepping : 0
/proc/cpuinfo: cpu MHz : 1916.194
/proc/cpuinfo: cache size : 512 KB
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 1
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep
mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
ts
/proc/cpuinfo: bogomips : 3836.44
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 0170-0177 : ide1
/proc/ioports: 01f0-01f7 : ide0
/proc/ioports: 0376-0376 : ide1
/proc/ioports: 0378-037a : parport0
/proc/ioports: 037b-037f : parport0
/proc/ioports: 03c0-03df : vesafb
/proc/ioports: 03f2-03f5 : floppy
/proc/ioports: 03f6-03f6 : ide0
/proc/ioports: 03f7-03f7 : floppy DIR
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 0778-077a : parport0
/proc/ioports: 0800-0803 : ACPI PM1a_EVT_BLK
/proc/ioports: 0804-0805 : ACPI PM1a_CNT_BLK
/proc/ioports: 0808-080b : ACPI PM_TMR
/proc/ioports: 0810-0815 : ACPI CPU throttle
/proc/ioports: 0820-0823 : ACPI GPE0_BLK
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: b800-b8ff : 0000:00:12.0
/proc/ioports: b800-b8ff : via-rhine
/proc/ioports: bc00-bc1f : 0000:00:10.0
/proc/ioports: bc00-bc1f : uhci_hcd
/proc/ioports: c000-c01f : 0000:00:10.1
/proc/ioports: c000-c01f : uhci_hcd
/proc/ioports: c400-c41f : 0000:00:10.2
/proc/ioports: c400-c41f : uhci_hcd
/proc/ioports: c800-c81f : 0000:00:10.3
/proc/ioports: c800-c81f : uhci_hcd
/proc/ioports: cc00-ccff : 0000:00:0c.0
/proc/ioports: cc00-ccff : 8139too
/proc/ioports: d000-d01f : 0000:00:0a.0
/proc/ioports: d400-d4ff : 0000:00:0f.0
/proc/ioports: d400-d4ff : sata_via
/proc/ioports: d800-d80f : 0000:00:0f.0
/proc/ioports: d800-d80f : sata_via
/proc/ioports: dc00-dc03 : 0000:00:0f.0
/proc/ioports: dc00-dc03 : sata_via
/proc/ioports: e000-e007 : 0000:00:0f.0
/proc/ioports: e000-e007 : sata_via
/proc/ioports: e400-e403 : 0000:00:0f.0
/proc/ioports: e400-e403 : sata_via
/proc/ioports: e800-e807 : 0000:00:0f.0
/proc/ioports: e800-e807 : sata_via
/proc/ioports: ec00-ec07 : 0000:00:0a.1
/proc/ioports: fc00-fc0f : 0000:00:0f.1
/proc/ioports: fc00-fc07 : ide0
/proc/ioports: fc08-fc0f : ide1
/proc/iomem: 00000000-0009fbff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 0009fc00-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000cedff : Video ROM
/proc/iomem: 000d0000-000d7fff : reserved
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-3ffeffff : System RAM
/proc/iomem: 00100000-00276d79 : Kernel code
/proc/iomem: 00276d7a-0030cc73 : Kernel data
/proc/iomem: 3fff0000-3fff7fff : ACPI Tables
/proc/iomem: 3fff8000-3fffffff : ACPI Non-volatile Storage
/proc/iomem: bbd00000-dbcfffff : PCI Bus #01
/proc/iomem: c0000000-cfffffff : 0000:01:00.0
/proc/iomem: c0000000-cfffffff : vesafb
/proc/iomem: dbe00000-dfefffff : PCI Bus #01
/proc/iomem: dd000000-ddffffff : 0000:01:00.0
/proc/iomem: de000000-deffffff : 0000:01:00.0
/proc/iomem: dfee0000-dfefffff : 0000:01:00.0
/proc/iomem: dfff4000-dfff7fff : 0000:00:0a.2
/proc/iomem: dfffb400-dfffb4ff : 0000:00:12.0
/proc/iomem: dfffb400-dfffb4ff : via-rhine
/proc/iomem: dfffb500-dfffb5ff : 0000:00:10.4
/proc/iomem: dfffb500-dfffb5ff : ehci_hcd
/proc/iomem: dfffb700-dfffb7ff : 0000:00:0c.0
/proc/iomem: dfffb700-dfffb7ff : 8139too
/proc/iomem: dfffb800-dfffbfff : 0000:00:0a.2
/proc/iomem: dfffb800-dfffbfff : ohci1394
/proc/iomem: e0000000-e3ffffff : 0000:00:00.0
/proc/iomem: fec00000-fec00fff : reserved
/proc/iomem: fee00000-fee00fff : reserved
/proc/iomem: fff80000-ffffffff : reserved
/proc/interrupts: CPU0
/proc/interrupts: 0: 719111 IO-APIC-edge timer
/proc/interrupts: 1: 248 IO-APIC-edge i8042
/proc/interrupts: 6: 8 IO-APIC-edge floppy
/proc/interrupts: 7: 2 IO-APIC-edge parport0
/proc/interrupts: 9: 0 IO-APIC-level acpi
/proc/interrupts: 12: 48564 IO-APIC-edge i8042
/proc/interrupts: 14: 91426 IO-APIC-edge ide0
/proc/interrupts: 15: 11205 IO-APIC-edge ide1
/proc/interrupts: 169: 3 IO-APIC-level ohci1394
/proc/interrupts: 177: 0 IO-APIC-level libata
/proc/interrupts: 185: 5512 IO-APIC-level uhci_hcd:usb1,
uhci_hcd:usb2, uhci_hcd:usb3, uhci_hcd:usb4, ehci_hcd:usb5
/proc/interrupts: 193: 277958 IO-APIC-level eth1
/proc/interrupts: NMI: 0
/proc/interrupts: LOC: 719099
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 906792 kB
/proc/meminfo: MemFree: 50732 kB
/proc/meminfo: Buffers: 61900 kB
/proc/meminfo: Cached: 709596 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 314064 kB
/proc/meminfo: Inactive: 484056 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 906792 kB
/proc/meminfo: LowFree: 50732 kB
/proc/meminfo: SwapTotal: 1052248 kB
/proc/meminfo: SwapFree: 1051784 kB
/proc/meminfo: Dirty: 1644 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 26660 kB
/proc/meminfo: Mapped: 6972 kB
/proc/meminfo: Slab: 48216 kB
/proc/meminfo: PageTables: 268 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: CommitLimit: 1505644 kB
/proc/meminfo: Committed_AS: 68772 kB
/proc/meminfo: VmallocTotal: 122576 kB
/proc/meminfo: VmallocUsed: 11312 kB
/proc/meminfo: VmallocChunk: 110736 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd event0
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 feffffdf
ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0011 Vendor=0002 Product=0006 Version=0056
/proc/bus/input/devices: N: Name="ImExPS/2 Logitech Wheel Mouse"
/proc/bus/input/devices: P: Phys=isa0060/serio1/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input1
/proc/bus/input/devices: H: Handlers=mouse0 event1
/proc/bus/input/devices: B: EV=7
/proc/bus/input/devices: B: KEY=1f0000 0 0 0 0 0 0 0 0
/proc/bus/input/devices: B: REL=143
/proc/bus/input/devices:
dmidecode: # dmidecode 2.8
dmidecode: SMBIOS 2.3 present.
dmidecode: 29 structures occupying 984 bytes.
dmidecode: Table at 0x000F0630.
dmidecode:
dmidecode: Handle 0x0000, DMI type 0, 20 bytes
dmidecode: BIOS Information
dmidecode: Vendor: American Megatrends Inc.
dmidecode: Version: P1.10
dmidecode: Release Date: 12/08/2004
dmidecode: Address: 0xF0000
dmidecode: Runtime Size: 64 kB
dmidecode: ROM Size: 256 kB
dmidecode: Characteristics:
dmidecode: ISA is supported
dmidecode: PCI is supported
dmidecode: PNP is supported
dmidecode: APM is supported
dmidecode: BIOS is upgradeable
dmidecode: BIOS shadowing is allowed
dmidecode: ESCD support is available
dmidecode: Boot from CD is supported
dmidecode: Selectable boot is supported
dmidecode: BIOS ROM is socketed
dmidecode: EDD is supported
dmidecode: 5.25"/360 KB floppy services are supported (int 13h)
dmidecode: 5.25"/1.2 MB floppy services are supported (int 13h)
dmidecode: 3.5"/720 KB floppy services are supported (int 13h)
dmidecode: 3.5"/2.88 MB floppy services are supported (int 13h)
dmidecode: Print screen service is supported (int 5h)
dmidecode: 8042 keyboard services are supported (int 9h)
dmidecode: Printer services are supported (int 17h)
dmidecode: CGA/mono video services are supported (int 10h)
dmidecode: ACPI is supported
dmidecode: USB legacy is supported
dmidecode: AGP is supported
dmidecode: LS-120 boot is supported
dmidecode: ATAPI Zip drive boot is supported
dmidecode: BIOS boot specification is supported
dmidecode:
dmidecode: Handle 0x0001, DMI type 1, 25 bytes
dmidecode: System Information
dmidecode: Manufacturer:
dmidecode: Product Name: K7VT4APro
dmidecode: Version: 1.0x
dmidecode: Serial Number: 00000000
dmidecode: UUID: Not Settable
dmidecode: Wake-up Type: Power Switch
dmidecode:
dmidecode: Handle 0x0002, DMI type 2, 8 bytes
dmidecode: Base Board Information
dmidecode: Manufacturer:
dmidecode: Product Name: K7VT4APro
dmidecode: Version: 1.0x
dmidecode: Serial Number: 00000000
dmidecode:
dmidecode: Handle 0x0003, DMI type 3, 17 bytes
dmidecode: Chassis Information
dmidecode: Manufacturer:
dmidecode: Type: Desktop
dmidecode: Lock: Not Present
dmidecode: Version: X.XX
dmidecode: Serial Number: 00000000
dmidecode: Asset Tag: 00000000
dmidecode: Boot-up State: Other
dmidecode: Power Supply State: Other
dmidecode: Thermal State: Other
dmidecode: Security Status: None
dmidecode: OEM Information: 0x00000000
dmidecode:
dmidecode: Handle 0x0004, DMI type 4, 32 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: Socket-A
dmidecode: Type: Unknown
dmidecode: Family: Unknown
dmidecode: Manufacturer: AMD
dmidecode: ID: A0 06 90 D4 55 00 00 00
dmidecode: Version: AMD Athlon(tm) XP 2600+
dmidecode: Voltage: 3.3 V 2.9 V
dmidecode: External Clock: 166 MHz
dmidecode: Max Speed: 3000 MHz
dmidecode: Current Speed: 1917 MHz
dmidecode: Status: Populated, Enabled
dmidecode: Upgrade: Socket A (Socket 462)
dmidecode: L1 Cache Handle: 0x0005
dmidecode: L2 Cache Handle: 0x0006
dmidecode: L3 Cache Handle: Not Provided
dmidecode:
dmidecode: Handle 0x0005, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: Internal Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 1
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 128 KB
dmidecode: Maximum Size: 1024 KB
dmidecode: Supported SRAM Types:
dmidecode: Synchronous
dmidecode: Installed SRAM Type: Synchronous
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: None
dmidecode: System Type: Unified
dmidecode: Associativity: 4-way Set-associative
dmidecode:
dmidecode: Handle 0x0006, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: Internal Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 2
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 512 KB
dmidecode: Maximum Size: 1024 KB
dmidecode: Supported SRAM Types:
dmidecode: Synchronous
dmidecode: Installed SRAM Type: Synchronous
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: System Type: Unified
dmidecode: Associativity: 4-way Set-associative
dmidecode:
dmidecode: Handle 0x0007, DMI type 5, 20 bytes
dmidecode: Memory Controller Information
dmidecode: Error Detecting Method: 32-bit ECC
dmidecode: Error Correcting Capabilities:
dmidecode: Single-bit Error Correcting
dmidecode: Supported Interleave: One-way Interleave
dmidecode: Current Interleave: One-way Interleave
dmidecode: Maximum Memory Module Size: 1024 MB
dmidecode: Maximum Total Memory Size: 2048 MB
dmidecode: Supported Speeds:
dmidecode: Other
dmidecode: Supported Memory Types:
dmidecode: Parity
dmidecode: ECC
dmidecode: DIMM
dmidecode: SDRAM
dmidecode: Memory Module Voltage: 3.3 V
dmidecode: Associated Memory Slots: 2
dmidecode: 0x0008
dmidecode: 0x0009
dmidecode: Enabled Error Correcting Capabilities:
dmidecode: Single-bit Error Correcting
dmidecode:
dmidecode: Handle 0x0008, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIMM1
dmidecode: Bank Connections: 1 0
dmidecode: Current Speed: Unknown
dmidecode: Type: FPM DIMM
dmidecode: Installed Size: 512 MB (Double-bank Connection)
dmidecode: Enabled Size: 512 MB (Double-bank Connection)
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x0009, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIMM2
dmidecode: Bank Connections: 3 2
dmidecode: Current Speed: Unknown
dmidecode: Type: FPM DIMM
dmidecode: Installed Size: 512 MB (Double-bank Connection)
dmidecode: Enabled Size: 512 MB (Double-bank Connection)
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x000A, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI1
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: 1
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: Opening is shared
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x000B, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI2
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: In Use
dmidecode: Length: Long
dmidecode: ID: 2
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: Opening is shared
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x000C, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI3
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: 3
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: Opening is shared
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x000D, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI4
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: In Use
dmidecode: Length: Long
dmidecode: ID: 4
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: Opening is shared
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x000E, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI5
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: 5
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: Opening is shared
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x000F, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: PS2 KEYBOARD
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: PS2 Keyboard
dmidecode: External Connector Type: PS/2
dmidecode: Port Type: Keyboard Port
dmidecode:
dmidecode: Handle 0x0010, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: PS2 MOUSE
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: PS2 Mouse
dmidecode: External Connector Type: PS/2
dmidecode: Port Type: Mouse Port
dmidecode:
dmidecode: Handle 0x0011, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: COM
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: COM Port
dmidecode: External Connector Type: DB-9 male
dmidecode: Port Type: Serial Port 16550A Compatible
dmidecode:
dmidecode: Handle 0x0012, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: LPT
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: LPT Port
dmidecode: External Connector Type: DB-25 female
dmidecode: Port Type: Parallel Port ECP/EPP
dmidecode:
dmidecode: Handle 0x0013, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: USB
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Rear USB 0
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0014, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: USB
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Rear USB 1
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0015, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: USB
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Front USB 2
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0016, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: USB
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Front USB 3
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0017, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: ETHERNET
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: ETHERNET
dmidecode: External Connector Type: RJ-45
dmidecode: Port Type: Network Port
dmidecode:
dmidecode: Handle 0x0018, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: LINE-OUT
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: LINE-OUT
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0019, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: LINE-IN
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: LINE-IN
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x001A, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: MICROPHONE
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: MICROPHONE
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x001B, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: GAME
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Game Port
dmidecode: External Connector Type: DB-15 female
dmidecode: Port Type: MIDI Port
dmidecode:
dmidecode: Handle 0x001C, DMI type 13, 22 bytes
dmidecode: BIOS Language Information
dmidecode: Installable Languages: 1
dmidecode: English
dmidecode: Currently Installed Language: English
dmidecode:
dmidecode: Wrong DMI structures length: 984 bytes announced,
structures occupy 965 bytes.
/proc/fb: 0 VESA VGA
/proc/fb: 1 VGA16 VGA
/etc/directfbrc: no-hardware
/etc/directfbrc: bg-color=ffdcdad5
/etc/directfbrc: screenshot-dir=/var/log
/etc/directfbrc: disable-module=keyboard
/etc/directfbrc: disable-module=ps2mouse
/etc/directfbrc: #disable-module=linux_input
dfbinfo: (*) DirectFB/Config: Parsing config file '/etc/directfbrc'.
dfbinfo:
dfbinfo: ---------------------- DirectFB v0.9.25 ---------------------
dfbinfo: (c) 2000-2002 convergence integrated media GmbH
dfbinfo: (c) 2002-2004 convergence GmbH
dfbinfo: -----------------------------------------------------------
dfbinfo:
dfbinfo: (*) DirectFB/Core: Single Application Core. (2006-12-04 07:06)
dfbinfo: (*) Direct/Memcpy: Using linux kernel memcpy()
dfbinfo: (*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 17847)...
dfbinfo: (*) Direct/Modules: suppress module 'ps2mouse'
dfbinfo: (*) Direct/Modules: suppress module 'keyboard'
dfbinfo: (*) Direct/Thread: Running 'Linux Input' (INPUT, 17848)...
dfbinfo: (!!!) *** UNIMPLEMENTED [fusion_reactor_set_lock] ***
[../../../lib/fusion/reactor.c:853]
dfbinfo: (*) DirectFB/Input: AT Translated Set 2 keyboard (1) 0.1
(convergence integrated media GmbH)
dfbinfo: (*) Direct/Thread: Running 'Linux Input' (INPUT, 17849)...
dfbinfo: (*) DirectFB/Input: ImExPS/2 Logitech Wheel Mouse (2) 0.1
(convergence integrated media GmbH)
dfbinfo: (*) DirectFB/Graphics: Generic Software Rasterizer 0.6
(convergence integrated media GmbH)
dfbinfo: (*) DirectFB/Core/WM: Default 0.2 (Convergence GmbH)
dfbinfo:
dfbinfo:
dfbinfo: Screen (00) FBDev Primary Screen (primary screen)
dfbinfo: Caps: VSYNC POWER_MANAGEMENT
dfbinfo:
dfbinfo: Layer (00) FBDev Primary Layer (primary layer)
dfbinfo: Type: GRAPHICS
dfbinfo: Caps: SURFACE BRIGHTNESS CONTRAST SATURATION
dfbinfo:
dfbinfo:
dfbinfo: Input (00) AT Translated Set 2 keyboard (primary keyboard)
dfbinfo: Type: KEYBOARD
dfbinfo: Caps: KEYS
dfbinfo:
dfbinfo: Input (01) ImExPS/2 Logitech Wheel Mouse (primary mouse)
dfbinfo: Type: MOUSE
dfbinfo: Caps: AXES BUTTONS
dfbinfo: Max. Axis: 3
dfbinfo: Max. Button: 4
dfbinfo:

==============================================
Installer status:
==============================================
Package: ttf-thai-tlwg-udeb
Status: install ok unpacked
Version: 1:0.4.5-2
Description: Thai fonts in TrueType format for D-I use

Package: scsi-core-modules-2.6.18-5-486-di
Status: install ok unpacked
Version: 1.44etch1
Provides: scsi-core-modules
Depends: kernel-image-2.6.18-5-486-di
Description: Core SCSI subsystem

Package: mouse-modules-2.6.18-5-486-di
Status: install ok unpacked
Version: 1.44etch1
Provides: mouse-modules
Depends: kernel-image-2.6.18-5-486-di, input-modules-2.6.18-5-486-di,
usb-modules-2.6.18-5-486-di
Description: Mouse support

Package: preseed-common
Status: install ok unpacked
Version: 1.28
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding

Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone

Package: localechooser
Status: install ok installed
Version: 1.37
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10

Package: fb-modules-2.6.18-5-486-di
Status: install ok unpacked
Version: 1.44etch1
Provides: fb-modules
Depends: kernel-image-2.6.18-5-486-di
Description: Frame buffer support

Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-13
Description: GNU C Library: NSS helper for DNS - udeb

Package: cdrom-checker
Status: install ok unpacked
Version: 1.11
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940

Package: lowmemcheck
Status: install ok unpacked
Version: 1.25
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode

Package: cdrom-retriever
Status: install ok installed
Version: 1.14
Provides: retriever
Depends: cdebconf-udeb, cdrom-detect
Description: Fetch modules from a CDROM

Package: main-menu
Status: install ok unpacked
Version: 1.18
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb,
libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: Debian installer main menu

Package: ttf-khmeros-udeb
Status: install ok unpacked
Version: 3.10-4
Provides: ttf-installer
Description: Debian-Installer font for the Khmer language of Cambodia

Package: di-utils-shell
Status: install ok unpacked
Version: 1.45etch1
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950

Package: ttf-dejavu-udeb
Status: install ok unpacked
Version: 2.15-1
Description: Vera font family derivate with additional characters

Package: di-utils
Status: install ok installed
Version: 1.45etch1
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: Miscellaneous utilities for the debian installer

Package: usb-modules-2.6.18-5-486-di
Status: install ok unpacked
Version: 1.44etch1
Provides: usb-modules
Depends: kernel-image-2.6.18-5-486-di
Description: USB support

Package: ttf-cjk-compact-udeb
Status: install ok unpacked
Version: 1.8
Description: Shrinked CJK TrueType fonts for GUI d-i.

Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52
Description: Newt frontend for Debian Configuration Management System

Package: pcmcia-storage-modules-2.6.18-5-486-di
Status: install ok unpacked
Version: 1.44etch1
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.18-5-486-di,
ide-core-modules-2.6.18-5-486-di, cdrom-core-modules-2.6.18-5-486-di,
pcmcia-modules-2.6.18-5-486-di
Description: PCMCIA storage drivers

Package: ttf-freefont-udeb
Status: install ok unpacked
Version: 20060501cvs-10
Provides: ttf-installer
Description: Freefont Sans fonts for the graphical installer

Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.3-pre4-2
Depends: libc6 (>= 2.3.6-6)
Description: tools for managing Linux kernel modules

Package: rootskel
Status: install ok installed
Version: 1.50
Depends: di-utils (>= 1.43), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer

Package: ide-core-modules-2.6.18-5-486-di
Status: install ok unpacked
Version: 1.44etch1
Provides: ide-core-modules
Depends: kernel-image-2.6.18-5-486-di
Description: IDE support

Package: libgtk-directfb-2.0-0-udeb
Status: install ok unpacked
Version: 2.8.20-7
Depends: libatk1.0-udeb (>= 1.12.2), libc6 (>= 2.3.6-6),
libcairo-directfb2-udeb (>= 1.2.4), libdirectfb-0.9-25-udeb,
libglib2.0-udeb (>= 2.12.0), libpango1.0-udeb (>= 1.14.8),
libpng12-0-udeb (>= 1.2.13-4)
Description: The GTK+ graphical user interface library - minimal runtime

Package: udev-udeb
Status: install ok unpacked
Version: 0.105-4
Depends: libc6 (>= 2.3.6-6)
Description: /dev/ and hotplug management daemon

Package: libpng12-0-udeb
Status: install ok unpacked
Version: 1.2.15~beta5-1
Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
Description: PNG library - minimal runtime library

Package: libnss-files-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-13
Description: GNU C Library: NSS helper for files - udeb

Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-7.1
Depends: libc6 (>= 2.3.6-6)
Description: Access software for a blind person using a soft braille terminal

Package: sata-modules-2.6.18-5-486-di
Status: install ok unpacked
Version: 1.44etch1
Provides: sata-modules
Depends: kernel-image-2.6.18-5-486-di, scsi-core-modules-2.6.18-5-486-di
Description: SATA drivers

Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.6-6)
Description: Free Implementation of the Unicode BiDi algorithm

Package: libcairo-directfb2-udeb
Status: install ok unpacked
Version: 1.2.4-4
Depends: fontconfig-udeb (>= 2.4.0), libc6 (>= 2.3.6-6),
libdirectfb-0.9-25-udeb, libfreetype6-udeb (>= 2.2), libpng12-0-udeb
(>= 1.2.8rel), zlib1g-udeb (>= 1:1.2.1)
Description: The Cairo 2D vector graphics library DirectFB build

Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.6-6)
Description: text-wrapping library with i18n - runtime udeb

Package: gtk2-engines-udeb
Status: install ok unpacked
Version: 1:2.8.2-1
Depends: libatk1.0-udeb (>= 1.12.2), libc6 (>= 2.3.6-6),
libcairo-directfb2-udeb (>= 1.2.4), libdirectfb-0.9-25-udeb,
libglib2.0-udeb (>= 2.12.0), libgtk-directfb-2.0-0-udeb (>= 2.8.0),
libpango1.0-udeb (>= 1.14.7)
Description: theme engines for GTK+ 2.x in the Debian installer

Package: acpi-modules-2.6.18-5-486-di
Status: install ok unpacked
Version: 1.44etch1
Provides: acpi-modules
Depends: kernel-image-2.6.18-5-486-di
Description: ACPI support modules

Package: fat-modules-2.6.18-5-486-di
Status: install ok unpacked
Version: 1.44etch1
Provides: fat-modules
Depends: kernel-image-2.6.18-5-486-di
Description: FAT filesystem support

Package: auto-install
Status: install ok unpacked
Version: 0.03
Depends: cdebconf-udeb, netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 19

Package: usb-discover
Status: install ok unpacked
Version: 1.06
Depends: cdebconf-udeb
Description: Discover USB and load kernel modules

Package: ide-modules-2.6.18-5-486-di
Status: install ok unpacked
Version: 1.44etch1
Provides: ide-modules
Depends: kernel-image-2.6.18-5-486-di, ide-core-modules-2.6.18-5-486-di
Description: IDE drivers

Package: rescue-check
Status: install ok unpacked
Version: 1.9
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1..18)
Description: enter d-i rescue mode if requested

Package: nano-udeb
Status: install ok unpacked
Version: 2.0.2-1etch1
Provides: editor
Depends: libc6 (>= 2.3.6-6), libslang2-udeb (>= 2.0.6-3)
Description: free Pico clone with some new features - tiny build

Package: rootskel-gtk
Status: install ok unpacked
Version: 1.06
Depends: cdebconf-udeb, rootskel, mouse-modules, gtk2-engines-udeb
Description: Additions for graphical installs to skeleton root
filesystem (debian-installer)

Package: cdebconf-udeb
Status: install ok installed
Version: 0.114
Provides: debconf-2.0
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50),
libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)

Package: ai-choosers
Status: install ok unpacked
Version: 0.03
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 22

Package: libpango1.0-udeb
Status: install ok unpacked
Version: 1.14.8-5
Depends: fontconfig-udeb (>= 2.4.0), libc6 (>= 2.3.6-6),
libcairo-directfb2-udeb (>= 1.2.4), libfreetype6-udeb (>= 2.2),
libglib2.0-udeb (>= 2.12.0), zlib1g-udeb (>= 1:1.2.1)
Description: Layout and rendering of internationalized text

Package: cdrom-modules-2.6.18-5-486-di
Status: install ok unpacked
Version: 1.44etch1
Provides: cdrom-modules
Depends: ide-modules-2.6.18-5-486-di,
cdrom-core-modules-2.6.18-5-486-di, kernel-image-2.6.18-5-486-di
Description: Esoteric CDROM drivers

Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions

Package: scsi-common-modules-2.6.18-5-486-di
Status: install ok unpacked
Version: 1.44etch1
Provides: scsi-common-modules
Depends: kernel-image-2.6.18-5-486-di,
scsi-core-modules-2.6.18-5-486-di, cdrom-core-modules-2.6.18-5-486-di
Description: Very common SCSI drivers

Package: usb-serial-modules-2.6.18-5-486-di
Status: install ok unpacked
Version: 1.44etch1
Provides: usb-serial-modules
Depends: kernel-image-2.6.18-5-486-di, usb-modules-2.6.18-5-486-di
Description: USB serial drivers

Package: load-cdrom
Status: install ok installed
Version: 1.14
Depends: cdebconf-udeb, cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 16

Package: cdrom-core-modules-2.6.18-5-486-di
Status: install ok unpacked
Version: 1.44etch1
Provides: cdrom-core-modules
Depends: kernel-image-2.6.18-5-486-di,
scsi-core-modules-2.6.18-5-486-di, ide-modules-2.6.18-5-486-di
Description: CDROM support

Package: kernel-image-2.6.18-5-486-di
Status: install ok unpacked
Version: 1.44etch1
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer

Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb, libc6 (>= 2.3.6-6)
Description: Plain text frontend for Debian Configuration Management System

Package: libfreetype6-udeb
Status: install ok unpacked
Version: 2.2.1-5+etch1
Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
Description: FreeType 2 font engine for the debian-installer

Package: floppy-modules-2.6.18-5-486-di
Status: install ok unpacked
Version: 1.44etch1
Provides: floppy-modules
Depends: kernel-image-2.6.18-5-486-di
Description: Floppy driver

Package: iso-3166-udeb
Status: install ok installed
Version: 1.0a-1
Description: provides iso_3166.tab file

Package: ttf-malayalam-fonts-udeb
Status: install ok unpacked
Version: 1:0.4.7.4
Provides: ttf-installer
Description: Free TrueType fonts for the Malayalam language

Package: scsi-modules-2.6.18-5-486-di
Status: install ok unpacked
Version: 1.44etch1
Provides: scsi-modules
Depends: kernel-image-2.6.18-5-486-di,
scsi-core-modules-2.6.18-5-486-di, parport-modules-2.6.18-5-486-di,
cdrom-core-modules-2.6.18-5-486-di, firmware-modules-2.6.18-5-486-di
Description: SCSI drivers

Package: ttf-farsiweb-udeb
Status: install ok unpacked
Version: 0.4.dfsg-6
Provides: ttf-installer
Description: Farsiweb TrueType fonts for the graphical installer

Package: floppy-retriever
Status: install ok unpacked
Version: 1.14
Provides: retriever
Depends: cdebconf-udeb, mountfloppy
Description: Fetches modules from a floppy

Package: ethdetect
Status: install ok installed
Version: 1.50
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect,
di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 17

Package: libexpat1-udeb
Status: install ok unpacked
Version: 1.95.8-3.4
Provides: libexpat1
Depends: libc6 (>= 2.3.6-6)
Description: XML parsing C library - runtime library

Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-4
Depends: libc6 (>= 2.3.6-6)
Description: Tiny utilities for the debian-installer

Package: initrd-preseed
Status: install ok unpacked
Version: 1.28
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd

Package: archdetect
Status: install ok installed
Version: 1.50
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50)
Description: Hardware architecture detector

Package: ttf-bpg-georgian-fonts-udeb
Status: install ok unpacked
Version: 0.3
Provides: ttf-installer
Description: BPG Georgian fonts for the graphical installer

Package: save-logs
Status: install ok unpacked
Version: 2.29
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940

Package: di-utils-reboot
Status: install ok unpacked
Version: 1.45etch1
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 995

Package: anna
Status: install ok installed
Version: 1.27
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb,
libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do

Package: input-modules-2.6.18-5-486-di
Status: install ok unpacked
Version: 1.44etch1
Provides: input-modules
Depends: kernel-image-2.6.18-5-486-di, usb-modules-2.6.18-5-486-di
Description: Input devices support

Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.1.0-1
Provides: libsysfs2
Depends: libc6 (>= 2.3.6-6)
Description: interface library to sysfs

Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-3
Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6

Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4~pre4-1
Depends: libc6 (>= 2.3.6-6)
Description: Linux PCI Utilities (udeb)

Package: console-keymaps-at
Status: install ok installed
Version: 2:1.01-7
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards

Package: ttf-tamil-fonts-udeb
Status: install ok unpacked
Version: 1:0.4.7.4
Provides: ttf-installer
Description: Free TrueType fonts for the Tamil language

Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.45etch1
Description: Terminfo entries needed by newt/slang in debian installer

Package: libdirectfb-0.9-25-udeb
Status: install ok unpacked
Version: 0.9.25.1-5
Provides: libdirectfb-0.9-25
Depends: libc6 (>= 2.3.6-6), libfreetype6-udeb (>= 2.2),
libpng12-0-udeb (>= 1.2.8rel), libsysfs2-udeb, zlib1g-udeb (>=
1:1.2.1)
Description: direct frame buffer graphics - shared libraries

Package: hw-detect
Status: install ok installed
Version: 1.50
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75),
di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it

Package: kbd-chooser
Status: install ok installed
Version: 1.34
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb,
libdebian-installer4-udeb (>= 0.50), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12

Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.50
Depends: libc6 (>= 2.3.6-6)
Description: Library of common debian-installer functions

Package: fontconfig-udeb
Status: install ok unpacked
Version: 2.4.2-1.2
Depends: fontconfig-udeb (>= 2.4.0), libc6 (>= 2.3.6-6),
libexpat1-udeb (>= 1.95.8), libfreetype6-udeb (>= 2.2), zlib1g-udeb
(>= 1:1.2.1)
Description: generic font configuration library - minimal runtime

Package: cdebconf-gtk-udeb
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb, libatk1.0-udeb (>= 1.12.2), libc6 (>=
2.3.6-6), libcairo-directfb2-udeb (>= 1.2.4), libdirectfb-0.9-25-udeb,
libglib2.0-udeb (>= 2.12.0), libgtk-directfb-2.0-0-udeb (>= 2.8.0),
libpango1.0-udeb (>= 1.14.8), rootskel-gtk (>= 0.05)
Description: Gtk+ frontend for Debian Configuration Management System

Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale

Package: usb-storage-modules-2.6.18-5-486-di
Status: install ok unpacked
Version: 1.44etch1
Provides: usb-storage-modules
Depends: ide-core-modules-2.6.18-5-486-di,
scsi-core-modules-2.6.18-5-486-di, usb-modules-2.6.18-5-486-di
Description: USB storage support

Package: env-preseed
Status: install ok unpacked
Version: 1.28
Description: debconf preseeding via environment variables

Package: mountfloppy
Status: install ok unpacked
Version: 0.11
Depends: cdebconf-udeb, di-utils (>= 1.15)
Description: Mounts a floppy

Package: firmware-modules-2.6.18-5-486-di
Status: install ok unpacked
Version: 1.44etch1
Provides: firmware-modules
Depends: kernel-image-2.6.18-5-486-di
Description: Firmware request modules

Package: pcmcia-modules-2.6.18-5-486-di
Status: install ok unpacked
Version: 1.44etch1
Provides: pcmcia-modules
Depends: kernel-image-2.6.18-5-486-di, firmware-modules-2.6.18-5-486-di
Description: Common PCMCIA drivers

Package: cdebconf-priority
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930

Package: netcfg
Status: install ok installed
Version: 1.36
Provides: configured-network
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb,
libdebian-installer4-udeb (>= 0.50), libiw28-udeb (>= 28),
dhcp-client-udeb | dhcp3-client-udeb | pump-udeb,
ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18

Package: file-preseed
Status: install ok unpacked
Version: 1.28
Depends: cdebconf-udeb, di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14

Package: ttf-tmuni-udeb
Status: install ok unpacked
Version: 0.0.20040806-1.2
Provides: ttf-installer
Description: font for Tibetan, Dzongkha and Ladakhi (OpenType Unicode)

Package: zlib1g-udeb
Status: install ok unpacked
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer

Package: libglib2.0-udeb
Status: install ok unpacked
Version: 2.12.4-2
Depends: libc6 (>= 2.3.6-6)
Description: The GLib library of C routines

Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.114
Depends: libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)

Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.5
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal

Package: firewire-core-modules-2.6.18-5-486-di
Status: install ok unpacked
Version: 1.44etch1
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.18-5-486-di, kernel-image-2.6.18-5-486-di
Description: Core FireWire drivers

Package: libatk1.0-udeb
Status: install ok unpacked
Version: 1.12.4-3
Depends: libc6 (>= 2.3.6-6), libglib2.0-udeb (>= 2.12.0)
Description: The ATK accessibility toolkit

Package: cdrom-detect
Status: install ok installed
Version: 1.20etch1
Depends: cdebconf-udeb, hw-detect, di-utils (>= 1.45etch1)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 13

Package: serial-modules-2.6.18-5-486-di
Status: install ok unpacked
Version: 1.44etch1
Provides: serial-modules
Depends: kernel-image-2.6.18-5-486-di, pcmcia-modules-2.6.18-5-486-di
Description: Serial drivers

Package: parport-modules-2.6.18-5-486-di
Status: install ok unpacked
Version: 1.44etch1
Provides: parport-modules
Depends: kernel-image-2.6.18-5-486-di
Description: Parallel port support

Package: debian-installer
Status: install ok installed
Version: cdrom-gtk-20070308etch1
Description: debian installation image

Package: apt-cdrom-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team
Version: 1:0.20etch1
Depends: cdrom-detect, cdebconf-udeb
Provides: apt-mirror-setup
Description: set up a CD in sources.list

Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team
Version: 1:0.20etch1
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list

Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team
Version: 1:0.20etch1
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70

Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 632
Maintainer: Debian Install System Team
Version: 1.76
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb,
libdebian-installer4-udeb (>= 0.50), mounted-partitions,
debootstrap-udeb (>= 0.3.1), created-fstab, archdetect,
di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19), gpgv-udeb
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65

Package: choose-mirror
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 12
Maintainer: Debian Install System Team
Version: 2.13etch1
Depends: configured-network, choose-mirror-bin
Description: Choose mirror to install from (menu item)
Installer-Menu-Item: 23

Package: choose-mirror-bin
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 336
Maintainer: Debian Install System Team
Version: 2.13etch1
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb,
libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: Choose mirror to install from (program)

Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 76
Maintainer: Debian Install System Team
Version: 0.15
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62

Package: crc-modules-2.6.18-5-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team
Version: 1.44etch1
Depends: kernel-image-2.6.18-5-486-di
Provides: crc-modules
Description: CRC modules
This package contains CRC support modules.

Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 168
Maintainer: Anthony Towns
Version: 0.3.3.2etch1
Depends: libc6 (>= 2.3.6-6), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.