Package: linux-image-2.6.22-3-amd64
Version: 2.6.22-5
Severity: normal

I have a 965G chipset with built-in audio, supported by the
snd-hda-intel driver. (More specific details below under "** PCI
devices".) It has rear audio connections for various speaker
configurations, and front jacks for headphones and microphone. I have
speakers connected to the rear jack appropriate for a single pair of
stereo speakers (labelled Front in ALSA, meaning the front stereo
speakers). When I plug headphones into the front headphone jack, the
headphones work, but the speakers continue to emit sound. I'd like
the speakers to mute when I plug in headphones.

Some Googling suggests the "model" option of the snd-hda-intel driver,
but I've tried numerous models and none achieve the desired effect.
In any case, the default model=auto should Do The Right Thing.

Happy to test patches or test kernels from Git, if that would help.

- Josh Triplett

-- Package-specific info:
** Version:
Linux version 2.6.22-3-amd64 (Debian 2.6.22-5) (maks@debian.org) (gcc version 4.1.3 20070831 (prerelease) (Debian 4.1.2-16)) #1 SMP Thu Oct 11 15:23:23 UTC 2007

** Not tainted

** Loaded modules:
Module Size Used by
snd_hda_intel 311968 4
i2c_dev 12424 0
i915 31488 2
drm 100776 3 i915
ppdev 13704 0
parport_pc 42664 0
lp 17352 0
parport 44428 3 ppdev,parport_pc,lp
button 13472 0
ac 10376 0
battery 15496 0
ipv6 296840 20
acpi_cpufreq 13704 0
cpufreq_ondemand 13328 4
cpufreq_userspace 9472 0
cpufreq_powersave 6272 0
cpufreq_stats 10400 0
freq_table 9600 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
cpufreq_conservative 12424 0
kvm_intel 25232 0
kvm 68688 1 kvm_intel
coretemp 12544 0
firewire_sbp2 18180 0
loop 23044 0
snd_pcm_oss 48288 0
snd_mixer_oss 21376 1 snd_pcm_oss
snd_pcm 89992 3 snd_hda_intel,snd_pcm_oss
snd_timer 28424 2 snd_pcm
snd 65896 11 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,sn d_timer
soundcore 13088 1 snd
i2c_i801 13468 0
iTCO_wdt 15824 0
intel_agp 32032 1
snd_page_alloc 15376 2 snd_hda_intel,snd_pcm
serio_raw 11780 0
i2c_core 31488 2 i2c_dev,i2c_i801
tsdev 13312 0
psmouse 45468 0
evdev 15232 3
ext3 137232 2
jbd 68080 1 ext3
mbcache 13832 1 ext3
dm_mirror 26240 0
dm_snapshot 21320 0
dm_mod 64112 5 dm_mirror,dm_snapshot
pata_marvell 12416 0
sd_mod 33280 4
ata_generic 13188 0
usbhid 32704 0
hid 31360 1 usbhid
ahci 28804 3
firewire_ohci 22784 0
generic 10372 0 [permanent]
firewire_core 49472 2 firewire_sbp2,firewire_ohci
crc_itu_t 6656 1 firewire_core
libata 132528 3 pata_marvell,ata_generic,ahci
ide_core 147728 1 generic
ehci_hcd 37900 0
scsi_mod 164536 3 firewire_sbp2,sd_mod,libata
uhci_hcd 29856 0
e1000 127552 0
thermal 19600 0
processor 39784 2 acpi_cpufreq,thermal
fan 9992 0

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82P965/G965 Memory Controller Hub [8086:29a0] (rev 02)
Subsystem: Intel Corporation Unknown device [8086:514d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0
Capabilities:

00:02.0 VGA compatible controller [0300]: Intel Corporation 82G965 Integrated Graphics Controller [8086:29a2] (rev 02) (prog-if 00 [VGA])
Subsystem: Intel Corporation Unknown device [8086:514d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at 90300000 (32-bit, non-prefetchable) [size=1M]
Region 2: Memory at 80000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 2410 [size=8]
Capabilities:

00:02.1 Display controller [0380]: Intel Corporation 82G965 Integrated Graphics Controller [8086:29a3] (rev 02)
Subsystem: Intel Corporation Unknown device [8086:514d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0
Region 0: Memory at 90200000 (32-bit, non-prefetchable) [size=1M]
Capabilities:

00:03.0 Communication controller [0780]: Intel Corporation 82P965/G965 HECI Controller [8086:29a4] (rev 02)
Subsystem: Intel Corporation Unknown device [8086:514d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 90426100 (64-bit, non-prefetchable) [size=16]
Capabilities:

00:19.0 Ethernet controller [0200]: Intel Corporation 82566DC Gigabit Network Connection [8086:104b] (rev 02)
Subsystem: Intel Corporation Unknown device [8086:0001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0
Interrupt: pin A routed to IRQ 1273
Region 0: Memory at 90400000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at 90424000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 20e0 [size=32]
Capabilities:

00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI #4 [8086:2834] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device [8086:514d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 20c0 [size=32]

00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI #5 [8086:2835] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device [8086:514d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 20a0 [size=32]

00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #2 [8086:283a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Unknown device [8086:514d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at 90425c00 (32-bit, non-prefetchable) [size=1K]
Capabilities:

00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
Subsystem: Intel Corporation Unknown device [8086:2504]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at 90420000 (64-bit, non-prefetchable) [size=16K]
Capabilities:

00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities:

00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 90100000-901fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities:

00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities:

00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities:

00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities:

00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI #1 [8086:2830] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device [8086:514d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 2080 [size=32]

00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI #2 [8086:2831] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device [8086:514d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 2060 [size=32]

00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI #3 [8086:2832] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device [8086:514d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 2040 [size=32]

00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #1 [8086:2836] (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Unknown device [8086:514d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at 90425800 (32-bit, non-prefetchable) [size=1K]
Capabilities:

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev f2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
Memory behind bridge: 90000000-900fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities:

00:1f.0 ISA bridge [0601]: Intel Corporation 82801HH (ICH8DH) LPC Interface Controller [8086:2812] (rev 02)
Subsystem: Intel Corporation Unknown device [8086:514d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
Capabilities:

00:1f.2 SATA controller [0106]: Intel Corporation 82801HB (ICH8) SATA AHCI Controller [8086:2821] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Intel Corporation Unknown device [8086:514d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
Interrupt: pin A routed to IRQ 1274
Region 0: I/O ports at 2408 [size=8]
Region 1: I/O ports at 241c [size=4]
Region 2: I/O ports at 2400 [size=8]
Region 3: I/O ports at 2418 [size=4]
Region 4: I/O ports at 2020 [size=32]
Region 5: Memory at 90425000 (32-bit, non-prefetchable) [size=2K]
Capabilities:

00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
Subsystem: Intel Corporation Unknown device [8086:514d]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin B routed to IRQ 21
Region 0: Memory at 90426000 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 2000 [size=32]

02:00.0 IDE interface [0101]: Marvell Technology Group Ltd. Unknown device [11ab:6101] (rev b1) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Marvell Technology Group Ltd. Unknown device [11ab:6101]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 1018 [size=8]
Region 1: I/O ports at 1024 [size=4]
Region 2: I/O ports at 1010 [size=8]
Region 3: I/O ports at 1020 [size=4]
Region 4: I/O ports at 1000 [size=16]
Region 5: Memory at 90100000 (32-bit, non-prefetchable) [size=512]
Capabilities:

06:03.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10 [OHCI])
Subsystem: Intel Corporation Unknown device [8086:514d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at 90004000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at 90000000 (32-bit, non-prefetchable) [size=16K]
Capabilities:



-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.22-3-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.22-3-amd64 depends on:
ii e2fsprogs 1.40.2-1 ext2 file system utilities and lib
ii initramfs-tools [linux-initr 0.91b tools for generating an initramfs
ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo

linux-image-2.6.22-3-amd64 recommends no packages.

-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.22-3-amd64/postinst/create-kimage-link-2.6.22-3-amd64: true
linux-image-2.6.22-3-amd64/prerm/would-invalidate-boot-loader-2.6.22-3-amd64: true
linux-image-2.6.22-3-amd64/postinst/depmod-error-initrd-2.6.22-3-amd64: false
linux-image-2.6.22-3-amd64/postinst/old-system-map-link-2.6.22-3-amd64: true
linux-image-2.6.22-3-amd64/preinst/overwriting-modules-2.6.22-3-amd64: true
linux-image-2.6.22-3-amd64/preinst/failed-to-move-modules-2.6.22-3-amd64:
linux-image-2.6.22-3-amd64/prerm/removing-running-kernel-2.6.22-3-amd64: true
linux-image-2.6.22-3-amd64/postinst/depmod-error-2.6.22-3-amd64: false
linux-image-2.6.22-3-amd64/postinst/bootloader-error-2.6.22-3-amd64:
linux-image-2.6.22-3-amd64/preinst/abort-overwrite-2.6.22-3-amd64:
linux-image-2.6.22-3-amd64/preinst/already-running-this-2.6.22-3-amd64:
linux-image-2.6.22-3-amd64/postinst/old-initrd-link-2.6.22-3-amd64: true
linux-image-2.6.22-3-amd64/postinst/bootloader-test-error-2.6.22-3-amd64:
linux-image-2.6.22-3-amd64/preinst/bootloader-initrd-2.6.22-3-amd64: true
linux-image-2.6.22-3-amd64/preinst/lilo-initrd-2.6.22-3-amd64: true
linux-image-2.6.22-3-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.22-3-amd64/preinst/abort-install-2.6.22-3-amd64:
linux-image-2.6.22-3-amd64/preinst/elilo-initrd-2.6.22-3-amd64: true
linux-image-2.6.22-3-amd64/postinst/old-dir-initrd-link-2.6.22-3-amd64: true
linux-image-2.6.22-3-amd64/preinst/initrd-2.6.22-3-amd64:
linux-image-2.6.22-3-amd64/postinst/kimage-is-a-directory:



--
To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org