problem with USB ports - Debian

This is a discussion on problem with USB ports - Debian ; Hello ! I'm trying to use a dongle with ndiswrapper, but it fails because a problem of usb. Indeed, when I put on the dongle, a lsusb give : Bus 001 Device 002: ID 0457:0163 Silicon Integrated Systems Corps. Bus ...

+ Reply to Thread
Results 1 to 6 of 6

Thread: problem with USB ports

  1. problem with USB ports

    Hello !
    I'm trying to use a dongle with ndiswrapper, but it fails because a
    problem of usb. Indeed, when I put on the dongle, a lsusb give :
    Bus 001 Device 002: ID 0457:0163 Silicon Integrated Systems Corps.
    Bus 001 Device 001: ID 0000:0000
    But, I have just one usb port on my portable !
    Two devices on the same port ?
    So, 30 seconds later, the dongle is not recognize. lsusb give :
    Bus 001 Device 001: ID 0000:0000
    So, I can't use my dongle.
    Thanks for help !
    Thibaud.


    --
    To UNSUBSCRIBE, email to debian-laptop-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

  2. Re: problem with USB ports

    > Bus 001 Device 002: ID 0457:0163 Silicon Integrated Systems Corps.
    > Bus 001 Device 001: ID 0000:0000


    ID 0000:0000 is the usb hub. there you plug your devices.

    akkording to http://sidux.com/PNphpBB2-viewtopic-t-68.html there is problem
    at least with kanotix + kernel 2.6.18.4-slh-up-1 + wlan stick.

    nik


    --
    To UNSUBSCRIBE, email to debian-laptop-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

  3. Re: problem with USB ports

    Thanks for your help Dr Nikolaus. Must I install
    ndiswrapper-utils-1.8.deb ? Because I tried, and it failed. But I'm
    sorry, I don't understand german. Can you explain, please ?

    Dr. Nikolaus Klepp a écrit :
    >> Bus 001 Device 002: ID 0457:0163 Silicon Integrated Systems Corps.
    >> Bus 001 Device 001: ID 0000:0000

    >
    > ID 0000:0000 is the usb hub. there you plug your devices.
    >
    > akkording to http://sidux.com/PNphpBB2-viewtopic-t-68.html there is problem
    > at least with kanotix + kernel 2.6.18.4-slh-up-1 + wlan stick.
    >
    > nik
    >
    >




    --
    To UNSUBSCRIBE, email to debian-laptop-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

  4. Re: problem with USB ports

    hi!
    the solution presented there is this:

    1) install the right kernel module (on the example it was kernel
    2.6.18.4-slh-up-1) - replace '...2.6.18.4-slh-up-1_1.28-1+1_i386' with
    whatever kernel you use:
    # dpkg -i ndiswrapper-modules-2.6.18.4-slh-up-1_1.28-1+1_i386.deb

    2) install ndiswrapper-utils 1.9:
    # dpkg -i ndiswrapper-utils-1.9_1.30-1_i386

    that should do the job. hope it warkes for you, too

    nik

    Am Mittwoch, 7. Februar 2007 22:16 schrieb Thibaud Hulin:
    > Thanks for your help Dr Nikolaus. Must I install
    > ndiswrapper-utils-1.8.deb ? Because I tried, and it failed. But I'm
    > sorry, I don't understand german. Can you explain, please ?
    >
    > Dr. Nikolaus Klepp a écrit :
    > >> Bus 001 Device 002: ID 0457:0163 Silicon Integrated Systems Corps.
    > >> Bus 001 Device 001: ID 0000:0000

    > >
    > > ID 0000:0000 is the usb hub. there you plug your devices.
    > >
    > > akkording to http://sidux.com/PNphpBB2-viewtopic-t-68.html there is
    > > problem at least with kanotix + kernel 2.6.18.4-slh-up-1 + wlan stick.
    > >
    > > nik


  5. Re: problem with USB ports

    Thanks for your explains !
    I used the link on your page to download and install ndiswrapper common,
    source and utils.
    But I don't know where are the -modules ?
    Waiting, I tried to get on the dongle, and after a couple of seconds, I
    got these errors :
    usb 1-1: device descriptor read/64, error -71
    Now, lsusb don't recognize my dongle...

    Thibaud.



    Dr. Nikolaus Klepp a écrit :
    > hi!
    > the solution presented there is this:
    >
    > 1) install the right kernel module (on the example it was kernel
    > 2.6.18.4-slh-up-1) - replace '...2.6.18.4-slh-up-1_1.28-1+1_i386' with
    > whatever kernel you use:
    > # dpkg -i ndiswrapper-modules-2.6.18.4-slh-up-1_1.28-1+1_i386.deb
    >
    > 2) install ndiswrapper-utils 1.9:
    > # dpkg -i ndiswrapper-utils-1.9_1.30-1_i386
    >
    > that should do the job. hope it warkes for you, too
    >
    > nik
    >
    > Am Mittwoch, 7. Februar 2007 22:16 schrieb Thibaud Hulin:
    >> Thanks for your help Dr Nikolaus. Must I install
    >> ndiswrapper-utils-1.8.deb ? Because I tried, and it failed. But I'm
    >> sorry, I don't understand german. Can you explain, please ?
    >>
    >> Dr. Nikolaus Klepp a écrit :
    >>>> Bus 001 Device 002: ID 0457:0163 Silicon Integrated Systems Corps.
    >>>> Bus 001 Device 001: ID 0000:0000
    >>> ID 0000:0000 is the usb hub. there you plug your devices.
    >>>
    >>> akkording to http://sidux.com/PNphpBB2-viewtopic-t-68.html there is
    >>> problem at least with kanotix + kernel 2.6.18.4-slh-up-1 + wlan stick.
    >>>
    >>> nik

    >
    >
    >




    --
    To UNSUBSCRIBE, email to debian-laptop-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

  6. Re: problem with USB ports

    hi!

    sorry to say, but all docs i found refer to do: a) install kernel sources,
    sometimes b) install newer kernel + sources but all say c) install latest
    ndiswraper. "error -71" apears quit often in the groups, seams to be
    something with power supply (???) - at least when the plugged unit is a disk
    drive or similar. i haven't seen something with a solution mentioning a wlan
    stich and error -7. but i've seen another - german - success storry with the
    same stick at http://www.unixboard.de/vb3/archive/...p/t-25667.html -
    again, install kernel sources and latest ndiswrapper.
    maybe you can find some help there:

    http://www.wlanfr.net
    http://www.alionet.org/lofiversion/i...hp/t13870.html

    nik

    Am Donnerstag, 8. Februar 2007 19:25 schrieb Thibaud Hulin:
    > Thanks for your explains !
    > I used the link on your page to download and install ndiswrapper common,
    > source and utils.
    > But I don't know where are the -modules ?
    > Waiting, I tried to get on the dongle, and after a couple of seconds, I
    > got these errors :
    > usb 1-1: device descriptor read/64, error -71
    > Now, lsusb don't recognize my dongle...
    >
    > Thibaud.
    >
    > Dr. Nikolaus Klepp a écrit :
    > > hi!
    > > the solution presented there is this:
    > >
    > > 1) install the right kernel module (on the example it was kernel
    > > 2.6.18.4-slh-up-1) - replace '...2.6.18.4-slh-up-1_1.28-1+1_i386' with
    > > whatever kernel you use:
    > > # dpkg -i ndiswrapper-modules-2.6.18.4-slh-up-1_1.28-1+1_i386.deb
    > >
    > > 2) install ndiswrapper-utils 1.9:
    > > # dpkg -i ndiswrapper-utils-1.9_1.30-1_i386
    > >
    > > that should do the job. hope it warkes for you, too
    > >
    > > nik
    > >
    > > Am Mittwoch, 7. Februar 2007 22:16 schrieb Thibaud Hulin:
    > >> Thanks for your help Dr Nikolaus. Must I install
    > >> ndiswrapper-utils-1.8.deb ? Because I tried, and it failed. But I'm
    > >> sorry, I don't understand german. Can you explain, please ?
    > >>
    > >> Dr. Nikolaus Klepp a écrit :
    > >>>> Bus 001 Device 002: ID 0457:0163 Silicon Integrated Systems Corps.
    > >>>> Bus 001 Device 001: ID 0000:0000
    > >>>
    > >>> ID 0000:0000 is the usb hub. there you plug your devices.
    > >>>
    > >>> akkording to http://sidux.com/PNphpBB2-viewtopic-t-68.html there is
    > >>> problem at least with kanotix + kernel 2.6.18.4-slh-up-1 + wlan stick.
    > >>>
    > >>> nik


+ Reply to Thread