Hi listmembers
I would like to use beryl (compiz) and xgl on my notebook. I've a very old one
and hope, you can tell me, if it would work. My notebook is an IBM ThinkPad
T21, 256mb ram, hdd is 20gb,Pentium III (Coppermine), 647.255
and this is my lspci:

*************************************************
debiany% lspci
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:02.0 CardBus bridge: Texas Instruments PCI1450 (rev 03)
00:02.1 CardBus bridge: Texas Instruments PCI1450 (rev 03)
00:03.0 Ethernet controller: 3Com Corporation 3c556B CardBus [Tornado] (rev 20)
00:03.1 Communication controller: 3Com Corporation Mini PCI 56k Winmodem (rev 20)
00:05.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev01)
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev01)
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
01:00.0 VGA compatible controller: S3 Inc. 86C270-294 Savage/IX-MV (rev11)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88w8335[Libertas] 802.11b/g Wireless (rev 03)
************************************************

Is it possible to use xgl and beryl on my notebook? Or doesn't? I've
tried a lot, so I installed .deb's I found in the web and tryed the tutorial
[1]. So I assume it does not work, because of VGA S3 Savage graficcard.... But
I hope, you got an idea.. Never the less, here is uname -a , could be important
for you...: 2.6.17-2-686

[1] http://www.lukytux.net/xgl_unter_debian.php

Best Regards
Mike J.

--
Mike Jankowski
mike_jan@web.de
irc.freenode.net
#kanotix, #debian.de


--
To UNSUBSCRIBE, email to debian-laptop-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org