Etch not detecting DVD writer - Debian

This is a discussion on Etch not detecting DVD writer - Debian ; Hi all! few days ago I installed Etch on my computer and am now stuck with the DVD writer. The installer had no issue booting from the drive and do the installation. But the installed system no longer detects that ...

+ Reply to Thread
Results 1 to 5 of 5

Thread: Etch not detecting DVD writer

  1. Etch not detecting DVD writer

    Hi all!

    few days ago I installed Etch on my computer and am now stuck with the
    DVD writer. The installer had no issue booting from the drive and do the
    installation. But the installed system no longer detects that a DVD
    drive is there.

    The DVD is a SATA drive from LG, connected to a JMicron SATA/IDE JMB 363
    (according mainboard manual) controller. I'm wondering that the Etch
    installer was able to run this combination, whereas the Etch
    installation does not...

    Searching the net about that issue I'm even more wondering that the
    installation worked, after I read that support for the JMicron
    controller was introduced with 2.6.19. Don't get me wrong, I'm not
    complaining that the installation worked that smoothly... :-)

    Booting Knoppix 5.2 live CD works well, with the DVD being fine... but
    that's based on 2.6.19 anyway...

    Changing BIOS settings for the JMicron controller from IDE to AHCI
    didn't made a difference.

    Has anyone seen this before and ideas how to get Etch detect my DVD drive?

    Thanks & best regards,
    Manfred

    Bootdata ok (command line is root=/dev/md0 ro )
    Linux version 2.6.18-4-amd64 (Debian 2.6.18.dfsg.1-12) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Mon Mar 26 11:36:53 CEST 2007
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000007e790000 (usable)
    BIOS-e820: 000000007e790000 - 000000007e79e000 (ACPI data)
    BIOS-e820: 000000007e79e000 - 000000007e7e0000 (ACPI NVS)
    BIOS-e820: 000000007e7e0000 - 000000007e800000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
    DMI 2.4 present.
    ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000fad70
    ACPI: RSDT (v001 NEC 0x03000719 MSFT 0x00000097) @ 0x000000007e790000
    ACPI: FADT (v002 MSTEST OEMFACP 0x03000719 MSFT 0x00000097) @ 0x000000007e790200
    ACPI: MADT (v001 MSTEST OEMAPIC 0x03000719 MSFT 0x00000097) @ 0x000000007e790390
    ACPI: MCFG (v001 MSTEST OEMMCFG 0x03000719 MSFT 0x00000097) @ 0x000000007e790400
    ACPI: SLIC (v001 NEC 0x03000719 MSFT 0x00000097) @ 0x000000007e790440
    ACPI: OEMB (v001 MSTEST AMI_OEM 0x03000719 MSFT 0x00000097) @ 0x000000007e79e040
    ACPI: HPET (v001 MSTEST OEMHPET 0x03000719 MSFT 0x00000097) @ 0x000000007e79a250
    ACPI: ASF! (v032 LEGEND I865PASF 0x00000001 INTL 0x20060113) @ 0x000000007e79a288
    ACPI: GSCI (v001 MSTEST GMCHSCI 0x03000719 MSFT 0x00000097) @ 0x000000007e79e0c0
    ACPI: SSDT (v001 AMI CPU1PM 0x00000001 INTL 0x20060113) @ 0x000000007e7a00f0
    ACPI: SSDT (v001 AMI CPU2PM 0x00000001 INTL 0x20060113) @ 0x000000007e7a02b0
    ACPI: DSDT (v001 A0579 A0579000 0x00000000 INTL 0x20060113) @ 0x0000000000000000
    No NUMA configuration found
    Faking a node at 0000000000000000-000000007e790000
    Bootmem setup node 0 0000000000000000-000000007e790000
    On node 0 totalpages: 509966
    DMA zone: 3056 pages, LIFO batch:0
    DMA32 zone: 506910 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x808
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Processor #0 6:15 APIC version 20
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Processor #1 6:15 APIC version 20
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
    ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Setting APIC routing to physical flat
    ACPI: HPET id: 0x8086a202 base: 0xfed00000
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 80000000 (gap: 7e800000:80600000)
    SMP: Allowing 4 CPUs, 2 hotplug CPUs
    Built 1 zonelists. Total pages: 509966
    Kernel command line: root=/dev/md0 ro
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 32768 bytes)
    time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
    time.c: Detected 1866.670 MHz processor.
    Console: colour VGA+ 80x25
    Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Checking aperture...
    Memory: 2030880k/2072128k available (1930k kernel code, 40860k reserved, 868k data, 176k init)
    Calibrating delay using timer specific routine.. 3736.72 BogoMIPS (lpj=7473459)
    Security Framework v1.0.0 initialized
    SELinux: Disabled at boot.
    Capability LSM initialized
    Mount-cache hash table entries: 256
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 4096K
    using mwait in idle threads.
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU0: Thermal monitoring enabled (TM2)
    SMP alternatives: switching to UP code
    ACPI: Core revision 20060707
    Using local APIC timer interrupts.
    result 16666702
    Detected 16.666 MHz APIC timer.
    SMP alternatives: switching to SMP code
    Booting processor 1/2 APIC 0x1
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 3733.50 BogoMIPS (lpj=7467000)
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 4096K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    CPU1: Thermal monitoring enabled (TM2)
    Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz stepping 06
    Brought up 2 CPUs
    testing NMI watchdog ... OK.
    migration_cost=20
    checking if image is initramfs... it is
    Freeing initrd memory: 5661k freed
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
    PCI: Not using MMCONFIG.
    PCI: Using configuration type 1
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    Boot video device is 0000:00:02.0
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
    ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    pnp: ACPI device : hid PNP0A08
    pnp: ACPI device : hid PNP0C01
    pnp: ACPI device : hid PNP0200
    pnp: ACPI device : hid PNP0B00
    pnp: ACPI device : hid PNP0800
    pnp: ACPI device : hid PNP0C04
    pnp: ACPI device : hid PNP0501
    pnp: ACPI device : hid PNP0C02
    pnp: ACPI device : hid PNP0C02
    pnp: ACPI device : hid PNP0103
    pnp: ACPI device : hid PNP0C02
    pnp: ACPI device : hid PNP0303
    pnp: ACPI device : hid PNP0C02
    pnp: ACPI device : hid PNP0C01
    pnp: PnP ACPI: found 14 devices
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0
    hpet0: 3 64-bit timers, 14318180 Hz
    PCI-GART: No AMD northbridge found.
    pnp: the driver 'system' has been registered
    pnp: match found with the PnP device '00:01' and the driver 'system'
    pnp: match found with the PnP device '00:07' and the driver 'system'
    pnp: 00:07: ioport range 0x290-0x297 has been reserved
    pnp: match found with the PnP device '00:08' and the driver 'system'
    pnp: match found with the PnP device '00:0a' and the driver 'system'
    pnp: match found with the PnP device '00:0c' and the driver 'system'
    pnp: match found with the PnP device '00:0d' and the driver 'system'
    PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
    PCI: Bridge: 0000:00:1c.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: bfe00000-bfefffff
    PCI: Bridge: 0000:00:1c.4
    IO window: a000-afff
    MEM window: ff400000-ff4fffff
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1e.0
    IO window: b000-bfff
    MEM window: ff500000-ff5fffff
    PREFETCH window: 80000000-800fffff
    GSI 16 sharing vector 0xA9 and IRQ 16
    ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 169
    PCI: Setting latency timer of device 0000:00:1c.4 to 64
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
    TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP reno registered
    audit: initializing netlink socket (disabled)
    audit(1183842440.080:1): initialized
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    Initializing Cryptographic API
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.0cie00]
    Allocate Port Service[0000:00:1c.0cie02]
    PCI: Setting latency timer of device 0000:00:1c.4 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.4cie00]
    Allocate Port Service[0000:00:1c.4cie02]
    Real Time Clock Driver v1.12ac
    hpet_resources: 0xfed00000 is busy
    Linux agpgart interface v0.101 (c) Dave Jones
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    pnp: the driver 'serial' has been registered
    pnp: match found with the PnP device '00:06' and the driver 'serial'
    00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
    pnp: the driver 'i8042 kbd' has been registered
    pnp: match found with the PnP device '00:0b' and the driver 'i8042 kbd'
    pnp: the driver 'i8042 aux' has been registered
    PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    PNP: PS/2 controller doesn't have AUX irq; using default 12
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    mice: PS/2 mouse device common for all mice
    TCP bic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    NET: Registered protocol family 8
    NET: Registered protocol family 20
    ACPI: (supports S0 S1 S3 S4 S5)
    Freeing unused kernel memory: 176k freed
    input: AT Translated Set 2 keyboard as /class/input/input0
    ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
    ACPI: Getting cpuindex for acpiid 0x3
    ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
    ACPI: Getting cpuindex for acpiid 0x4
    USB Universal Host Controller Interface driver v3.0
    GSI 17 sharing vector 0xC9 and IRQ 17
    ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 201
    PCI: Setting latency timer of device 0000:00:1a.0 to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:1a.0: irq 201, io base 0x0000d880
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    ieee1394: Initialized config rom entry `ip1394'
    ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 169
    PCI: Setting latency timer of device 0000:00:1a.1 to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1a.1: irq 169, io base 0x0000dc00
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    GSI 18 sharing vector 0xD1 and IRQ 18
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 209
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.0: irq 209, io base 0x0000d400
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    GSI 19 sharing vector 0xD9 and IRQ 19
    ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 217
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.1: irq 217, io base 0x0000d480
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    GSI 20 sharing vector 0xE1 and IRQ 20
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 225
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.2: irq 225, io base 0x0000d800
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 225
    PCI: Setting latency timer of device 0000:00:1a.7 to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
    ehci_hcd 0000:00:1a.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1a.7
    ehci_hcd 0000:00:1a.7: irq 225, io mem 0xff9fb800
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb6: configuration #1 chosen from 1 choice
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 4 ports detected
    ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 209
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
    ehci_hcd 0000:00:1d.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: irq 209, io mem 0xff9fb400
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb7: configuration #1 chosen from 1 choice
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 6 ports detected
    JMB363: IDE controller at PCI slot 0000:01:00.1
    PCI: Enabling device 0000:01:00.1 (0000 -> 0001)
    ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 17 (level, low) -> IRQ 169
    JMB363: chipset revision 3
    JMB363: 100% native mode on irq 169
    PCI: Setting latency timer of device 0000:01:00.1 to 64
    ide2: BM-DMA at 0xa400-0xa407, BIOS settings: hdeio, hdfio
    ide3: BM-DMA at 0xa408-0xa40f, BIOS settings: hdgio, hdhio
    Probing IDE interface ide2...
    usb 5-2: new low speed USB device using uhci_hcd and address 2
    Probing IDE interface ide3...
    usb 5-2: configuration #1 chosen from 1 choice
    usbcore: registered new driver hiddev
    input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
    input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-2
    usbcore: registered new driver usbhid
    drivers/usb/input/hid-core.c: v2.6:USB HID core driver
    GSI 21 sharing vector 0xE9 and IRQ 21
    ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 21 (level, low) -> IRQ 233
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[233] MMIO=[ff5ff800-ff5fffff] Max Packet=[2048] IR/IT contexts=[4/8]
    JMB361: IDE controller at PCI slot 0000:01:00.0
    ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 201
    JMB361: chipset revision 3
    JMB361: 100% native mode on irq 201
    JMB361: dma_base is invalid
    ide0: JMB361 Bus-Master DMA disabled (BIOS)
    JMB361: dma_base is invalid
    ide1: JMB361 Bus-Master DMA disabled (BIOS)
    Probing IDE interface ide0...
    SCSI subsystem initialized
    libata version 2.00 loaded.
    Probing IDE interface ide1...
    ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 19 (level, low) -> IRQ 217
    skge 1.6 addr 0xff5f8000 irq 217 chip Yukon-Lite rev 9
    skge eth0: addr 00:1b:fc:7c:0a:bd
    ata_piix 0000:00:1f.2: version 2.00
    ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
    ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 217
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    ata1: SATA max UDMA/133 cmd 0xE880 ctl 0xE802 bmdma 0xE080 irq 217
    ata2: SATA max UDMA/133 cmd 0xE480 ctl 0xE402 bmdma 0xE088 irq 217
    scsi0 : ata_piix
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800015071d2]
    ata1.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32)
    ata1.00: ata1: dev 0 multi count 16
    ata1.00: configured for UDMA/133
    scsi1 : ata_piix
    ata2.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32)
    ata2.00: ata2: dev 0 multi count 16
    ata2.00: configured for UDMA/133
    Vendor: ATA Model: ST3320620AS Rev: 3.AA
    Type: Direct-Access ANSI SCSI revision: 05
    Vendor: ATA Model: ST3320620AS Rev: 3.AA
    Type: Direct-Access ANSI SCSI revision: 05
    ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
    ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 217
    PCI: Setting latency timer of device 0000:00:1f.5 to 64
    ata3: SATA max UDMA/133 cmd 0xD080 ctl 0xD002 bmdma 0xC800 irq 217
    ata4: SATA max UDMA/133 cmd 0xCC00 ctl 0xC882 bmdma 0xC808 irq 217
    scsi2 : ata_piix
    ata3.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32)
    ata3.00: ata3: dev 0 multi count 16
    ata3.00: configured for UDMA/133
    scsi3 : ata_piix
    ATA: abnormal status 0x7F on port 0xCC07
    Vendor: ATA Model: ST3320620AS Rev: 3.AA
    Type: Direct-Access ANSI SCSI revision: 05
    SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
    sda: Write Protect is off
    sda: Mode Sense: 00 3a 00 00
    SCSI device sda: drive cache: write back
    SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
    sda: Write Protect is off
    sda: Mode Sense: 00 3a 00 00
    SCSI device sda: drive cache: write back
    sda: sda1 sda2 sda3
    sd 0:0:0:0: Attached scsi disk sda
    SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
    sdb: Write Protect is off
    sdb: Mode Sense: 00 3a 00 00
    SCSI device sdb: drive cache: write back
    SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
    sdb: Write Protect is off
    sdb: Mode Sense: 00 3a 00 00
    SCSI device sdb: drive cache: write back
    sdb: sdb1 sdb2 sdb3
    sd 1:0:0:0: Attached scsi disk sdb
    SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB)
    sdc: Write Protect is off
    sdc: Mode Sense: 00 3a 00 00
    SCSI device sdc: drive cache: write back
    SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB)
    sdc: Write Protect is off
    sdc: Mode Sense: 00 3a 00 00
    SCSI device sdc: drive cache: write back
    sdc: sdc1 sdc2 sdc3
    sd 2:0:0:0: Attached scsi disk sdc
    Probing IDE interface ide0...
    Probing IDE interface ide1...
    Probing IDE interface ide2...
    Probing IDE interface ide3...
    md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
    md: bitmap version 4.39
    md: raid1 personality registered for level 1
    raid5: automatically using best checksumming function: generic_sse
    generic_sse: 6839.000 MB/sec
    raid5: using function: generic_sse (6839.000 MB/sec)
    raid6: int64x1 1750 MB/s
    raid6: int64x2 2111 MB/s
    raid6: int64x4 2016 MB/s
    raid6: int64x8 1342 MB/s
    raid6: sse2x1 3208 MB/s
    raid6: sse2x2 3834 MB/s
    raid6: sse2x4 5546 MB/s
    raid6: using algorithm sse2x4 (5546 MB/s)
    md: raid6 personality registered for level 6
    md: raid5 personality registered for level 5
    md: raid4 personality registered for level 4
    md: md0 stopped.
    md: bind
    md: bind
    md: bind
    raid1: raid set md0 active with 2 out of 2 mirrors
    md: md1 stopped.
    md: bind
    md: bind
    md: bind
    raid5: device sda3 operational as raid disk 0
    raid5: device sdc3 operational as raid disk 2
    raid5: device sdb3 operational as raid disk 1
    raid5: allocated 3212kB for md1
    raid5: raid level 5 set md1 active with 3 out of 3 devices, algorithm 2
    RAID5 conf printout:
    --- rd:3 wd:3 fd:0
    disk 0, o:1, dev:sda3
    disk 1, o:1, dev:sdb3
    disk 2, o:1, dev:sdc3
    device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
    Attempting manual resume
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    ts: Compaq touchscreen protocol output
    eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
    input: PC Speaker as /class/input/input2
    PCI: Enabling device 0000:00:1f.3 (0001 -> 0003)
    ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 225
    GSI 22 sharing vector 0x32 and IRQ 22
    ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50
    PCI: Setting latency timer of device 0000:00:1b.0 to 64
    hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
    Adding 979956k swap on /dev/sda2. Priority:-1 extents:1 across:979956k
    Adding 979956k swap on /dev/sdb2. Priority:-2 extents:1 across:979956k
    Adding 979956k swap on /dev/sdc2. Priority:-3 extents:1 across:979956k
    EXT3 FS on md0, internal journal
    loop: loaded (max 8 devices)
    ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
    ieee1394: sbp2: Try serialize_io=0 for better performance
    agpgart: Detected an Intel 965G Chipset.
    agpgart: Detected 7676K stolen memory.
    agpgart: AGP aperture is 512M @ 0xd0000000
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-0, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-1, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-4, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-5, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-2, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-3, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    skge eth1: enabling interface
    skge eth1: Link is up at 100 Mbps, full duplex, flow control tx and rx
    ACPI: Power Button (FF) [PWRF]
    ACPI: Power Button (CM) [PWRB]
    pnp: the driver 'parport_pc' has been registered
    lp: driver loaded but no devices found
    ppdev: user-space parallel port driver
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    IPv6 over IPv4 tunneling driver
    [drm] Initialized drm 1.0.1 20051102
    ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 201
    [drm] Initialized i915 1.5.0 20060119 on minor 0
    eth1: no IPv6 routers present

    Linux version 2.6.19.5 (root@Knoppix) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #4 SMP PREEMPT Sat Mar 3 02:19:32 CET 2007
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000007e790000 (usable)
    BIOS-e820: 000000007e790000 - 000000007e79e000 (ACPI data)
    BIOS-e820: 000000007e79e000 - 000000007e7e0000 (ACPI NVS)
    BIOS-e820: 000000007e7e0000 - 000000007e800000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
    1127MB HIGHMEM available.
    896MB LOWMEM available.
    found SMP MP-table at 000ff780
    Entering add_active_range(0, 0, 518032) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 229376
    HighMem 229376 -> 518032
    early_node_map[1] active PFN ranges
    0: 0 -> 518032
    On node 0 totalpages: 518032
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4064 pages, LIFO batch:0
    Normal zone: 1760 pages used for memmap
    Normal zone: 223520 pages, LIFO batch:31
    HighMem zone: 2255 pages used for memmap
    HighMem zone: 286401 pages, LIFO batch:31
    DMI 2.4 present.
    ACPI: RSDP (v000 ACPIAM ) @ 0x000fad70
    ACPI: RSDT (v001 NEC 0x03000719 MSFT 0x00000097) @ 0x7e790000
    ACPI: FADT (v002 MSTEST OEMFACP 0x03000719 MSFT 0x00000097) @ 0x7e790200
    ACPI: MADT (v001 MSTEST OEMAPIC 0x03000719 MSFT 0x00000097) @ 0x7e790390
    ACPI: MCFG (v001 MSTEST OEMMCFG 0x03000719 MSFT 0x00000097) @ 0x7e790400
    ACPI: SLIC (v001 NEC 0x03000719 MSFT 0x00000097) @ 0x7e790440
    ACPI: OEMB (v001 MSTEST AMI_OEM 0x03000719 MSFT 0x00000097) @ 0x7e79e040
    ACPI: HPET (v001 MSTEST OEMHPET 0x03000719 MSFT 0x00000097) @ 0x7e79a250
    ACPI: ASF! (v032 LEGEND I865PASF 0x00000001 INTL 0x20060113) @ 0x7e79a288
    ACPI: GSCI (v001 MSTEST GMCHSCI 0x03000719 MSFT 0x00000097) @ 0x7e79e0c0
    ACPI: SSDT (v001 AMI CPU1PM 0x00000001 INTL 0x20060113) @ 0x7e7a00f0
    ACPI: SSDT (v001 AMI CPU2PM 0x00000001 INTL 0x20060113) @ 0x7e7a02b0
    ACPI: DSDT (v001 A0579 A0579000 0x00000000 INTL 0x20060113) @ 0x00000000
    ACPI: PM-Timer IO Port: 0x808
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Processor #0 6:15 APIC version 20
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Processor #1 6:15 APIC version 20
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
    ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    ACPI: HPET id: 0x8086a202 base: 0xfed00000
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 80000000 (gap: 7e800000:80600000)
    Detected 1866.736 MHz processor.
    Built 1 zonelists. Total pages: 513985
    Kernel command line: ramdisk_size=100000 init=/etc/init lang=de apm=power-off vga=791 initrd=minirt.gz nomce loglevel=0 libata.atapi_enabled=1 quiet nmi_watchdog=0 BOOT_IMAGE=knoppix BOOT_IMAGE=linux
    mapped APIC to ffffd000 (fee00000)
    mapped IOAPIC to ffffc000 (fec00000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Console: colour dummy device 80x25
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 2048256k/2072128k available (2748k kernel code, 22668k reserved, 956k data, 336k init, 1154624k highmem)
    virtual kernel memory layout:
    fixmap : 0xffe16000 - 0xfffff000 (1956 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
    lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
    .init : 0xc04a6000 - 0xc04fa000 ( 336 kB)
    .data : 0xc03af3bc - 0xc049e7b4 ( 956 kB)
    .text : 0xc0100000 - 0xc03af3bc (2748 kB)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Using HPET for base-timer
    Calibrating delay using timer specific routine.. 3736.14 BogoMIPS (lpj=7472281)
    Security Framework v1.0.0 initialized
    SELinux: Disabled at boot.
    Capability LSM initialized
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
    monitor/mwait feature present.
    using mwait in idle threads.
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 4096K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0000e3bd 00000000 00000001
    Compat vDSO mapped to ffffe000.
    Checking 'hlt' instruction... OK.
    Checking for popad bug... OK.
    SMP alternatives: switching to UP code
    ACPI: Core revision 20060707
    CPU0: Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz stepping 06
    SMP alternatives: switching to SMP code
    Booting processor 1/1 eip 3000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 3733.42 BogoMIPS (lpj=7466847)
    CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
    monitor/mwait feature present.
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 4096K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0000e3bd 00000000 00000001
    CPU1: Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz stepping 06
    Total of 2 processors activated (7469.56 BogoMIPS).
    ENABLING IO-APIC IRQs
    ...TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    checking TSC synchronization across 2 CPUs: passed.
    Brought up 2 CPUs
    migration_cost=665
    checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
    Freeing initrd memory: 1189k freed
    NET: Registered protocol family 16
    EISA bus registered
    ACPI: bus type pci registered
    PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
    PCI: Not using MMCONFIG.
    PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
    PCI: Using configuration type 1
    Setting up standard PCI resources
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    Boot video device is 0000:00:02.0
    PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
    PCI quirk: region 0480-04bf claimed by ICH6 GPIO
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
    ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    pnp: PnP ACPI: found 14 devices
    PnPBIOS: Disabled by ACPI PNP
    SCSI subsystem initialized
    libata version 2.00 loaded.
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    pnp: 00:07: ioport range 0x290-0x297 has been reserved
    PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
    PCI: Bridge: 0000:00:1c.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: bfe00000-bfefffff
    PCI: Bridge: 0000:00:1c.4
    IO window: a000-afff
    MEM window: ff400000-ff4fffff
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1e.0
    IO window: b000-bfff
    MEM window: ff500000-ff5fffff
    PREFETCH window: 80000000-800fffff
    ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1c.4 to 64
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
    TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    audit: initializing netlink socket (disabled)
    audit(1183842679.792:1): initialized
    highmem bounce pool size: 64 pages
    Total HugeTLB memory allocated, 0
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    fuse init (API version 7.8)
    fuse distribution version: 2.6.1
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered (default)
    io scheduler cfq registered
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.0cie00]
    Allocate Port Service[0000:00:1c.0cie02]
    PCI: Setting latency timer of device 0000:00:1c.4 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.4cie00]
    Allocate Port Service[0000:00:1c.4cie02]
    vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3072k, total 7616k
    vesafb: mode is 1024x768x16, linelength=2048, pages=3
    vesafb: protected mode interface info at 00ff:44f0
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Real Time Clock Driver v1.12ac
    floppy0: no floppy controllers found
    RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    JMB363: IDE controller at PCI slot 0000:01:00.1
    PCI: Enabling device 0000:01:00.1 (0000 -> 0001)
    ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 17 (level, low) -> IRQ 16
    JMB363: chipset revision 3
    JMB363: 100% native mode on irq 16
    PCI: Setting latency timer of device 0000:01:00.1 to 64
    ide2: BM-DMA at 0xa400-0xa407, BIOS settings: hdeio, hdfio
    ide3: BM-DMA at 0xa408-0xa40f, BIOS settings: hdgMA, hdhMA
    Probing IDE interface ide2...
    Probing IDE interface ide3...
    Probing IDE interface ide0...
    Probing IDE interface ide1...
    Probing IDE interface ide2...
    Probing IDE interface ide3...
    Loading iSCSI transport class v2.0-724.<7>ahci 0000:01:00.0: version 2.0
    ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:01:00.0 to 64
    ahci 0000:01:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
    ahci 0000:01:00.0: flags: 64bit ncq pm led clo pmp pio slum part
    ata1: SATA max UDMA/133 cmd 0xF8828100 ctl 0x0 bmdma 0x0 irq 17
    ata2: SATA max UDMA/133 cmd 0xF8828180 ctl 0x0 bmdma 0x0 irq 17
    scsi0 : ahci
    ata1: SATA link down (SStatus 0 SControl 300)
    scsi1 : ahci
    ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata2.00: ATAPI, max UDMA/100
    ata2.00: configured for UDMA/100
    scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H62N CL00 PQ: 0 ANSI: 5
    ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    ata2.00: (irq_stat 0x48000000, interface fatal error)
    ata2.00: tag 0 cmd 0xa0 Emask 0x50 stat 0x51 err 0x64 (ATA bus error)
    ata2: soft resetting port
    ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata2.00: configured for UDMA/100
    ata2: EH complete
    sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    ata_piix 0000:00:1f.2: version 2.00ac6
    ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    ata3: SATA max UDMA/133 cmd 0xE880 ctl 0xE802 bmdma 0xE080 irq 18
    ata4: SATA max UDMA/133 cmd 0xE480 ctl 0xE402 bmdma 0xE088 irq 18
    scsi2 : ata_piix
    ata3.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32)
    ata3.00: ata3: dev 0 multi count 16
    ata3.00: configured for UDMA/133
    scsi3 : ata_piix
    ata4.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32)
    ata4.00: ata4: dev 0 multi count 16
    ata4.00: configured for UDMA/133
    scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
    SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
    sda: Write Protect is off
    sda: Mode Sense: 00 3a 00 00
    SCSI device sda: drive cache: write back
    SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
    sda: Write Protect is off
    sda: Mode Sense: 00 3a 00 00
    SCSI device sda: drive cache: write back
    sda: sda1 sda2 sda3
    sd 2:0:0:0: Attached scsi disk sda
    scsi 3:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
    SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
    sdb: Write Protect is off
    sdb: Mode Sense: 00 3a 00 00
    SCSI device sdb: drive cache: write back
    SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
    sdb: Write Protect is off
    sdb: Mode Sense: 00 3a 00 00
    SCSI device sdb: drive cache: write back
    sdb: sdb1 sdb2 sdb3
    sd 3:0:0:0: Attached scsi disk sdb
    ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
    ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1f.5 to 64
    ata5: SATA max UDMA/133 cmd 0xD080 ctl 0xD002 bmdma 0xC800 irq 18
    ata6: SATA max UDMA/133 cmd 0xCC00 ctl 0xC882 bmdma 0xC808 irq 18
    scsi4 : ata_piix
    ata5.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32)
    ata5.00: ata5: dev 0 multi count 16
    ata5.00: configured for UDMA/133
    scsi5 : ata_piix
    ATA: abnormal status 0x7F on port 0xCC07
    scsi 4:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
    SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB)
    sdc: Write Protect is off
    sdc: Mode Sense: 00 3a 00 00
    SCSI device sdc: drive cache: write back
    SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB)
    sdc: Write Protect is off
    sdc: Mode Sense: 00 3a 00 00
    SCSI device sdc: drive cache: write back
    sdc: sdc1 sdc2 sdc3
    sd 4:0:0:0: Attached scsi disk sdc
    PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    PNP: PS/2 controller doesn't have AUX irq; using default 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    EISA: Probing bus 0 at eisa.0
    EISA: Detected 0 cards.
    Initializing XFRM netlink socket
    NET: Registered protocol family 1
    NET: Registered protocol family 15
    Using IPI No-Shortcut mode
    ACPI: (supports S0 S1 S3 S4 S5)
    Time: tsc clocksource has been installed.
    input: AT Translated Set 2 keyboard as /class/input/input0
    RAMDISK: Compressed image found at block 0
    VFS: Mounted root (ext2 filesystem).
    Failed initialization of WD-7000 SCSI card!
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 19
    PCI: Setting latency timer of device 0000:00:1a.7 to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1a.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1a.7
    ehci_hcd 0000:00:1a.7: irq 19, io mem 0xff9fb800
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 4 ports detected
    ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:1d.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: irq 20, io mem 0xff9fb400
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 6 ports detected
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:1a.0 to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000d880
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1a.1 to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1a.1: irq 16, io base 0x0000dc00
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000d400
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000d480
    usb usb6: configuration #1 chosen from 1 choice
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000d800
    usb usb7: configuration #1 chosen from 1 choice
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 2 ports detected
    ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    usb 7-2: new low speed USB device using uhci_hcd and address 2
    usb 7-2: configuration #1 chosen from 1 choice
    usbcore: registered new interface driver libusual
    usbcore: registered new interface driver hiddev
    input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
    input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-2
    usbcore: registered new interface driver usbhid
    drivers/usb/input/hid-core.c: v2.6:USB HID core driver
    Initializing USB Mass Storage driver...
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    ieee1394: Initialized config rom entry `ip1394'
    ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 21 (level, low) -> IRQ 21
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[ff5ff800-ff5fffff] Max Packet=[2048] IR/IT contexts=[4/8]
    ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
    ieee1394: sbp2: Try serialize_io=0 for better performance
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800015071d2]
    ISO 9660 Extensions: Microsoft Joliet Level 3
    ISO 9660 Extensions: RRIP_1991A
    cloop: Initializing cloop v2.06
    cloop: loaded (max 8 devices)
    cloop: /cdrom/KNOPPIX/KNOPPIX: 49667 blocks, 131072 bytes/block, largest block is 131118 bytes.
    cloop: loaded 256 blocks into cache.
    ISO 9660 Extensions: RRIP_1991A
    cloop: losetup_file: 38179 blocks, 131072 bytes/block, largest block is 131118 bytes.
    cloop: loaded 256 blocks into cache.
    ISO 9660 Extensions: RRIP_1991A
    aufs 20070226
    Freeing unused kernel memory: 336k freed
    ACPI: Power Button (FF) [PWRF]
    ACPI: Power Button (CM) [PWRB]
    Using specific hotkey driver
    ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
    ACPI: Getting cpuindex for acpiid 0x3
    ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
    ACPI: Getting cpuindex for acpiid 0x4
    cpufreq: No nForce2 chipset.
    p4-clockmod: Unknown p4-clockmod-capable CPU. Please send an e-mail to
    p4-clockmod: Unknown p4-clockmod-capable CPU. Please send an e-mail to
    powernow: This module only works with AMD K7 CPUs
    ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    ata2.00: (irq_stat 0x48000000, interface fatal error)
    ata2.00: tag 0 cmd 0xa0 Emask 0x50 stat 0x51 err 0x54 (ATA bus error)
    ata2: soft resetting port
    ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata2.00: configured for UDMA/100
    ata2: EH complete
    eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
    ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    ata2.00: (irq_stat 0x48000000, interface fatal error)
    ata2.00: tag 0 cmd 0xa0 Emask 0x50 stat 0x51 err 0x54 (ATA bus error)
    sr 1:0:0:0: Attached scsi generic sg0 type 5
    sd 2:0:0:0: Attached scsi generic sg1 type 0
    sd 3:0:0:0: Attached scsi generic sg2 type 0
    sd 4:0:0:0: Attached scsi generic sg3 type 0
    ata2: soft resetting port
    ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata2.00: configured for UDMA/100
    ata2: EH complete
    PCI: Enabling device 0000:00:1f.3 (0001 -> 0003)
    ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 19
    Linux agpgart interface v0.101 (c) Dave Jones
    agpgart: Detected an Intel 965G Chipset.
    agpgart: Detected 7676K stolen memory.
    agpgart: AGP aperture is 512M @ 0xd0000000
    ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 19 (level, low) -> IRQ 18
    skge 1.9 addr 0xff5f8000 irq 18 chip Yukon-Lite rev 9
    skge eth1: addr 00:1b:fc:7c:0a:bd
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
    PCI: Setting latency timer of device 0000:00:1b.0 to 64
    hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
    device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
    Adding 979956k swap on /dev/sda2. Priority:-1 extents:1 across:979956k
    Adding 979956k swap on /dev/sdb2. Priority:-2 extents:1 across:979956k
    Adding 979956k swap on /dev/sdc2. Priority:-3 extents:1 across:979956k
    NET: Registered protocol family 17
    skge eth1: enabling interface
    skge eth1: Link is up at 100 Mbps, full duplex, flow control both
    [drm] Initialized drm 1.0.1 20051102
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    Mobile IPv6
    ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
    [drm] Initialized i915 1.5.0 20060119 on minor 0
    eth1: no IPv6 routers present
    skge eth1: disabling interface
    skge eth1: enabling interface
    skge eth1: Link is up at 100 Mbps, full duplex, flow control both
    eth1: no IPv6 routers present


  2. Re: Etch not detecting DVD writer


    > scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H62N CL00 PQ: 0

    ANSI: 5
    > ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    > ata2.00: (irq_stat 0x48000000, interface fatal error)
    > ata2.00: tag 0 cmd 0xa0 Emask 0x50 stat 0x51 err 0x64 (ATA bus error)
    > ata2: soft resetting port
    > ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    > ata2.00: configured for UDMA/100
    > ata2: EH complete
    > sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
    > Uniform CD-ROM driver Revision: 3.20
    > sr 1:0:0:0: Attached scsi CD-ROM sr0
    > ata_piix 0000:00:1f.2: version 2.00ac6
    > ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    > ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18


    Looks like a dvd rw drive WAS detected at ata2.00 assigned to sr0


    anfred Lutz wrote:
    > Hi all!
    >
    > few days ago I installed Etch on my computer and am now stuck with the
    > DVD writer. The installer had no issue booting from the drive and do the
    > installation. But the installed system no longer detects that a DVD
    > drive is there.
    >
    > The DVD is a SATA drive from LG, connected to a JMicron SATA/IDE JMB 363
    > (according mainboard manual) controller. I'm wondering that the Etch
    > installer was able to run this combination, whereas the Etch
    > installation does not...
    >
    > Searching the net about that issue I'm even more wondering that the
    > installation worked, after I read that support for the JMicron
    > controller was introduced with 2.6.19. Don't get me wrong, I'm not
    > complaining that the installation worked that smoothly... :-)
    >
    > Booting Knoppix 5.2 live CD works well, with the DVD being fine... but
    > that's based on 2.6.19 anyway...
    >
    > Changing BIOS settings for the JMicron controller from IDE to AHCI
    > didn't made a difference.
    >
    > Has anyone seen this before and ideas how to get Etch detect my DVD drive?
    >
    > Thanks & best regards,
    > Manfred
    >
    >
    > ------------------------------------------------------------------------
    >
    > Bootdata ok (command line is root=/dev/md0 ro )
    > Linux version 2.6.18-4-amd64 (Debian 2.6.18.dfsg.1-12) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Mon Mar 26 11:36:53 CEST 2007
    > BIOS-provided physical RAM map:
    > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    > BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    > BIOS-e820: 0000000000100000 - 000000007e790000 (usable)
    > BIOS-e820: 000000007e790000 - 000000007e79e000 (ACPI data)
    > BIOS-e820: 000000007e79e000 - 000000007e7e0000 (ACPI NVS)
    > BIOS-e820: 000000007e7e0000 - 000000007e800000 (reserved)
    > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    > BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
    > DMI 2.4 present.
    > ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000fad70
    > ACPI: RSDT (v001 NEC 0x03000719 MSFT 0x00000097) @ 0x000000007e790000
    > ACPI: FADT (v002 MSTEST OEMFACP 0x03000719 MSFT 0x00000097) @ 0x000000007e790200
    > ACPI: MADT (v001 MSTEST OEMAPIC 0x03000719 MSFT 0x00000097) @ 0x000000007e790390
    > ACPI: MCFG (v001 MSTEST OEMMCFG 0x03000719 MSFT 0x00000097) @ 0x000000007e790400
    > ACPI: SLIC (v001 NEC 0x03000719 MSFT 0x00000097) @ 0x000000007e790440
    > ACPI: OEMB (v001 MSTEST AMI_OEM 0x03000719 MSFT 0x00000097) @ 0x000000007e79e040
    > ACPI: HPET (v001 MSTEST OEMHPET 0x03000719 MSFT 0x00000097) @ 0x000000007e79a250
    > ACPI: ASF! (v032 LEGEND I865PASF 0x00000001 INTL 0x20060113) @ 0x000000007e79a288
    > ACPI: GSCI (v001 MSTEST GMCHSCI 0x03000719 MSFT 0x00000097) @ 0x000000007e79e0c0
    > ACPI: SSDT (v001 AMI CPU1PM 0x00000001 INTL 0x20060113) @ 0x000000007e7a00f0
    > ACPI: SSDT (v001 AMI CPU2PM 0x00000001 INTL 0x20060113) @ 0x000000007e7a02b0
    > ACPI: DSDT (v001 A0579 A0579000 0x00000000 INTL 0x20060113) @ 0x0000000000000000
    > No NUMA configuration found
    > Faking a node at 0000000000000000-000000007e790000
    > Bootmem setup node 0 0000000000000000-000000007e790000
    > On node 0 totalpages: 509966
    > DMA zone: 3056 pages, LIFO batch:0
    > DMA32 zone: 506910 pages, LIFO batch:31
    > ACPI: PM-Timer IO Port: 0x808
    > ACPI: Local APIC address 0xfee00000
    > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    > Processor #0 6:15 APIC version 20
    > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    > Processor #1 6:15 APIC version 20
    > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
    > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    > ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    > IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    > ACPI: IRQ0 used by override.
    > ACPI: IRQ2 used by override.
    > ACPI: IRQ9 used by override.
    > Setting APIC routing to physical flat
    > ACPI: HPET id: 0x8086a202 base: 0xfed00000
    > Using ACPI (MADT) for SMP configuration information
    > Allocating PCI resources starting at 80000000 (gap: 7e800000:80600000)
    > SMP: Allowing 4 CPUs, 2 hotplug CPUs
    > Built 1 zonelists. Total pages: 509966
    > Kernel command line: root=/dev/md0 ro
    > Initializing CPU#0
    > PID hash table entries: 4096 (order: 12, 32768 bytes)
    > time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
    > time.c: Detected 1866.670 MHz processor.
    > Console: colour VGA+ 80x25
    > Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    > Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    > Checking aperture...
    > Memory: 2030880k/2072128k available (1930k kernel code, 40860k reserved, 868k data, 176k init)
    > Calibrating delay using timer specific routine.. 3736.72 BogoMIPS (lpj=7473459)
    > Security Framework v1.0.0 initialized
    > SELinux: Disabled at boot.
    > Capability LSM initialized
    > Mount-cache hash table entries: 256
    > CPU: L1 I cache: 32K, L1 D cache: 32K
    > CPU: L2 cache: 4096K
    > using mwait in idle threads.
    > CPU: Physical Processor ID: 0
    > CPU: Processor Core ID: 0
    > CPU0: Thermal monitoring enabled (TM2)
    > SMP alternatives: switching to UP code
    > ACPI: Core revision 20060707
    > Using local APIC timer interrupts.
    > result 16666702
    > Detected 16.666 MHz APIC timer.
    > SMP alternatives: switching to SMP code
    > Booting processor 1/2 APIC 0x1
    > Initializing CPU#1
    > Calibrating delay using timer specific routine.. 3733.50 BogoMIPS (lpj=7467000)
    > CPU: L1 I cache: 32K, L1 D cache: 32K
    > CPU: L2 cache: 4096K
    > CPU: Physical Processor ID: 0
    > CPU: Processor Core ID: 1
    > CPU1: Thermal monitoring enabled (TM2)
    > Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz stepping 06
    > Brought up 2 CPUs
    > testing NMI watchdog ... OK.
    > migration_cost=20
    > checking if image is initramfs... it is
    > Freeing initrd memory: 5661k freed
    > NET: Registered protocol family 16
    > ACPI: bus type pci registered
    > PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
    > PCI: Not using MMCONFIG.
    > PCI: Using configuration type 1
    > ACPI: Interpreter enabled
    > ACPI: Using IOAPIC for interrupt routing
    > ACPI: PCI Root Bridge [PCI0] (0000:00)
    > PCI: Probing PCI hardware (bus 00)
    > Boot video device is 0000:00:02.0
    > PCI: Transparent bridge - 0000:00:1e.0
    > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
    > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
    > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
    > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
    > ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
    > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    > Linux Plug and Play Support v0.97 (c) Adam Belay
    > pnp: PnP ACPI init
    > pnp: ACPI device : hid PNP0A08
    > pnp: ACPI device : hid PNP0C01
    > pnp: ACPI device : hid PNP0200
    > pnp: ACPI device : hid PNP0B00
    > pnp: ACPI device : hid PNP0800
    > pnp: ACPI device : hid PNP0C04
    > pnp: ACPI device : hid PNP0501
    > pnp: ACPI device : hid PNP0C02
    > pnp: ACPI device : hid PNP0C02
    > pnp: ACPI device : hid PNP0103
    > pnp: ACPI device : hid PNP0C02
    > pnp: ACPI device : hid PNP0303
    > pnp: ACPI device : hid PNP0C02
    > pnp: ACPI device : hid PNP0C01
    > pnp: PnP ACPI: found 14 devices
    > usbcore: registered new driver usbfs
    > usbcore: registered new driver hub
    > PCI: Using ACPI for IRQ routing
    > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    > hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0
    > hpet0: 3 64-bit timers, 14318180 Hz
    > PCI-GART: No AMD northbridge found.
    > pnp: the driver 'system' has been registered
    > pnp: match found with the PnP device '00:01' and the driver 'system'
    > pnp: match found with the PnP device '00:07' and the driver 'system'
    > pnp: 00:07: ioport range 0x290-0x297 has been reserved
    > pnp: match found with the PnP device '00:08' and the driver 'system'
    > pnp: match found with the PnP device '00:0a' and the driver 'system'
    > pnp: match found with the PnP device '00:0c' and the driver 'system'
    > pnp: match found with the PnP device '00:0d' and the driver 'system'
    > PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
    > PCI: Bridge: 0000:00:1c.0
    > IO window: disabled.
    > MEM window: disabled.
    > PREFETCH window: bfe00000-bfefffff
    > PCI: Bridge: 0000:00:1c.4
    > IO window: a000-afff
    > MEM window: ff400000-ff4fffff
    > PREFETCH window: disabled.
    > PCI: Bridge: 0000:00:1e.0
    > IO window: b000-bfff
    > MEM window: ff500000-ff5fffff
    > PREFETCH window: 80000000-800fffff
    > GSI 16 sharing vector 0xA9 and IRQ 16
    > ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
    > PCI: Setting latency timer of device 0000:00:1c.0 to 64
    > ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 169
    > PCI: Setting latency timer of device 0000:00:1c.4 to 64
    > PCI: Setting latency timer of device 0000:00:1e.0 to 64
    > NET: Registered protocol family 2
    > IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
    > TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    > TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    > TCP: Hash tables configured (established 262144 bind 65536)
    > TCP reno registered
    > audit: initializing netlink socket (disabled)
    > audit(1183842440.080:1): initialized
    > VFS: Disk quotas dquot_6.5.1
    > Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    > Initializing Cryptographic API
    > io scheduler noop registered
    > io scheduler anticipatory registered
    > io scheduler deadline registered
    > io scheduler cfq registered (default)
    > PCI: Setting latency timer of device 0000:00:1c.0 to 64
    > assign_interrupt_mode Found MSI capability
    > Allocate Port Service[0000:00:1c.0cie00]
    > Allocate Port Service[0000:00:1c.0cie02]
    > PCI: Setting latency timer of device 0000:00:1c.4 to 64
    > assign_interrupt_mode Found MSI capability
    > Allocate Port Service[0000:00:1c.4cie00]
    > Allocate Port Service[0000:00:1c.4cie02]
    > Real Time Clock Driver v1.12ac
    > hpet_resources: 0xfed00000 is busy
    > Linux agpgart interface v0.101 (c) Dave Jones
    > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    > pnp: the driver 'serial' has been registered
    > pnp: match found with the PnP device '00:06' and the driver 'serial'
    > 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    > RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
    > pnp: the driver 'i8042 kbd' has been registered
    > pnp: match found with the PnP device '00:0b' and the driver 'i8042 kbd'
    > pnp: the driver 'i8042 aux' has been registered
    > PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    > PNP: PS/2 controller doesn't have AUX irq; using default 12
    > serio: i8042 AUX port at 0x60,0x64 irq 12
    > serio: i8042 KBD port at 0x60,0x64 irq 1
    > mice: PS/2 mouse device common for all mice
    > TCP bic registered
    > NET: Registered protocol family 1
    > NET: Registered protocol family 17
    > NET: Registered protocol family 8
    > NET: Registered protocol family 20
    > ACPI: (supports S0 S1 S3 S4 S5)
    > Freeing unused kernel memory: 176k freed
    > input: AT Translated Set 2 keyboard as /class/input/input0
    > ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
    > ACPI: Getting cpuindex for acpiid 0x3
    > ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
    > ACPI: Getting cpuindex for acpiid 0x4
    > USB Universal Host Controller Interface driver v3.0
    > GSI 17 sharing vector 0xC9 and IRQ 17
    > ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 201
    > PCI: Setting latency timer of device 0000:00:1a.0 to 64
    > uhci_hcd 0000:00:1a.0: UHCI Host Controller
    > uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    > uhci_hcd 0000:00:1a.0: irq 201, io base 0x0000d880
    > usb usb1: configuration #1 chosen from 1 choice
    > hub 1-0:1.0: USB hub found
    > hub 1-0:1.0: 2 ports detected
    > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    > ieee1394: Initialized config rom entry `ip1394'
    > ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 169
    > PCI: Setting latency timer of device 0000:00:1a.1 to 64
    > uhci_hcd 0000:00:1a.1: UHCI Host Controller
    > uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
    > uhci_hcd 0000:00:1a.1: irq 169, io base 0x0000dc00
    > usb usb2: configuration #1 chosen from 1 choice
    > hub 2-0:1.0: USB hub found
    > hub 2-0:1.0: 2 ports detected
    > GSI 18 sharing vector 0xD1 and IRQ 18
    > ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 209
    > PCI: Setting latency timer of device 0000:00:1d.0 to 64
    > uhci_hcd 0000:00:1d.0: UHCI Host Controller
    > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
    > uhci_hcd 0000:00:1d.0: irq 209, io base 0x0000d400
    > usb usb3: configuration #1 chosen from 1 choice
    > hub 3-0:1.0: USB hub found
    > hub 3-0:1.0: 2 ports detected
    > GSI 19 sharing vector 0xD9 and IRQ 19
    > ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 217
    > PCI: Setting latency timer of device 0000:00:1d.1 to 64
    > uhci_hcd 0000:00:1d.1: UHCI Host Controller
    > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
    > uhci_hcd 0000:00:1d.1: irq 217, io base 0x0000d480
    > usb usb4: configuration #1 chosen from 1 choice
    > hub 4-0:1.0: USB hub found
    > hub 4-0:1.0: 2 ports detected
    > GSI 20 sharing vector 0xE1 and IRQ 20
    > ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 225
    > PCI: Setting latency timer of device 0000:00:1d.2 to 64
    > uhci_hcd 0000:00:1d.2: UHCI Host Controller
    > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
    > uhci_hcd 0000:00:1d.2: irq 225, io base 0x0000d800
    > usb usb5: configuration #1 chosen from 1 choice
    > hub 5-0:1.0: USB hub found
    > hub 5-0:1.0: 2 ports detected
    > ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 225
    > PCI: Setting latency timer of device 0000:00:1a.7 to 64
    > ehci_hcd 0000:00:1a.7: EHCI Host Controller
    > ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
    > ehci_hcd 0000:00:1a.7: debug port 1
    > PCI: cache line size of 32 is not supported by device 0000:00:1a.7
    > ehci_hcd 0000:00:1a.7: irq 225, io mem 0xff9fb800
    > ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    > usb usb6: configuration #1 chosen from 1 choice
    > hub 6-0:1.0: USB hub found
    > hub 6-0:1.0: 4 ports detected
    > ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 209
    > PCI: Setting latency timer of device 0000:00:1d.7 to 64
    > ehci_hcd 0000:00:1d.7: EHCI Host Controller
    > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
    > ehci_hcd 0000:00:1d.7: debug port 1
    > PCI: cache line size of 32 is not supported by device 0000:00:1d.7
    > ehci_hcd 0000:00:1d.7: irq 209, io mem 0xff9fb400
    > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    > usb usb7: configuration #1 chosen from 1 choice
    > hub 7-0:1.0: USB hub found
    > hub 7-0:1.0: 6 ports detected
    > JMB363: IDE controller at PCI slot 0000:01:00.1
    > PCI: Enabling device 0000:01:00.1 (0000 -> 0001)
    > ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 17 (level, low) -> IRQ 169
    > JMB363: chipset revision 3
    > JMB363: 100% native mode on irq 169
    > PCI: Setting latency timer of device 0000:01:00.1 to 64
    > ide2: BM-DMA at 0xa400-0xa407, BIOS settings: hdeio, hdfio
    > ide3: BM-DMA at 0xa408-0xa40f, BIOS settings: hdgio, hdhio
    > Probing IDE interface ide2...
    > usb 5-2: new low speed USB device using uhci_hcd and address 2
    > Probing IDE interface ide3...
    > usb 5-2: configuration #1 chosen from 1 choice
    > usbcore: registered new driver hiddev
    > input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
    > input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-2
    > usbcore: registered new driver usbhid
    > drivers/usb/input/hid-core.c: v2.6:USB HID core driver
    > GSI 21 sharing vector 0xE9 and IRQ 21
    > ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 21 (level, low) -> IRQ 233
    > ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[233] MMIO=[ff5ff800-ff5fffff] Max Packet=[2048] IR/IT contexts=[4/8]
    > JMB361: IDE controller at PCI slot 0000:01:00.0
    > ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 201
    > JMB361: chipset revision 3
    > JMB361: 100% native mode on irq 201
    > JMB361: dma_base is invalid
    > ide0: JMB361 Bus-Master DMA disabled (BIOS)
    > JMB361: dma_base is invalid
    > ide1: JMB361 Bus-Master DMA disabled (BIOS)
    > Probing IDE interface ide0...
    > SCSI subsystem initialized
    > libata version 2.00 loaded.
    > Probing IDE interface ide1...
    > ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 19 (level, low) -> IRQ 217
    > skge 1.6 addr 0xff5f8000 irq 217 chip Yukon-Lite rev 9
    > skge eth0: addr 00:1b:fc:7c:0a:bd
    > ata_piix 0000:00:1f.2: version 2.00
    > ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
    > ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 217
    > PCI: Setting latency timer of device 0000:00:1f.2 to 64
    > ata1: SATA max UDMA/133 cmd 0xE880 ctl 0xE802 bmdma 0xE080 irq 217
    > ata2: SATA max UDMA/133 cmd 0xE480 ctl 0xE402 bmdma 0xE088 irq 217
    > scsi0 : ata_piix
    > ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800015071d2]
    > ata1.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32)
    > ata1.00: ata1: dev 0 multi count 16
    > ata1.00: configured for UDMA/133
    > scsi1 : ata_piix
    > ata2.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32)
    > ata2.00: ata2: dev 0 multi count 16
    > ata2.00: configured for UDMA/133
    > Vendor: ATA Model: ST3320620AS Rev: 3.AA
    > Type: Direct-Access ANSI SCSI revision: 05
    > Vendor: ATA Model: ST3320620AS Rev: 3.AA
    > Type: Direct-Access ANSI SCSI revision: 05
    > ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
    > ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 217
    > PCI: Setting latency timer of device 0000:00:1f.5 to 64
    > ata3: SATA max UDMA/133 cmd 0xD080 ctl 0xD002 bmdma 0xC800 irq 217
    > ata4: SATA max UDMA/133 cmd 0xCC00 ctl 0xC882 bmdma 0xC808 irq 217
    > scsi2 : ata_piix
    > ata3.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32)
    > ata3.00: ata3: dev 0 multi count 16
    > ata3.00: configured for UDMA/133
    > scsi3 : ata_piix
    > ATA: abnormal status 0x7F on port 0xCC07
    > Vendor: ATA Model: ST3320620AS Rev: 3.AA
    > Type: Direct-Access ANSI SCSI revision: 05
    > SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
    > sda: Write Protect is off
    > sda: Mode Sense: 00 3a 00 00
    > SCSI device sda: drive cache: write back
    > SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
    > sda: Write Protect is off
    > sda: Mode Sense: 00 3a 00 00
    > SCSI device sda: drive cache: write back
    > sda: sda1 sda2 sda3
    > sd 0:0:0:0: Attached scsi disk sda
    > SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
    > sdb: Write Protect is off
    > sdb: Mode Sense: 00 3a 00 00
    > SCSI device sdb: drive cache: write back
    > SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
    > sdb: Write Protect is off
    > sdb: Mode Sense: 00 3a 00 00
    > SCSI device sdb: drive cache: write back
    > sdb: sdb1 sdb2 sdb3
    > sd 1:0:0:0: Attached scsi disk sdb
    > SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB)
    > sdc: Write Protect is off
    > sdc: Mode Sense: 00 3a 00 00
    > SCSI device sdc: drive cache: write back
    > SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB)
    > sdc: Write Protect is off
    > sdc: Mode Sense: 00 3a 00 00
    > SCSI device sdc: drive cache: write back
    > sdc: sdc1 sdc2 sdc3
    > sd 2:0:0:0: Attached scsi disk sdc
    > Probing IDE interface ide0...
    > Probing IDE interface ide1...
    > Probing IDE interface ide2...
    > Probing IDE interface ide3...
    > md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
    > md: bitmap version 4.39
    > md: raid1 personality registered for level 1
    > raid5: automatically using best checksumming function: generic_sse
    > generic_sse: 6839.000 MB/sec
    > raid5: using function: generic_sse (6839.000 MB/sec)
    > raid6: int64x1 1750 MB/s
    > raid6: int64x2 2111 MB/s
    > raid6: int64x4 2016 MB/s
    > raid6: int64x8 1342 MB/s
    > raid6: sse2x1 3208 MB/s
    > raid6: sse2x2 3834 MB/s
    > raid6: sse2x4 5546 MB/s
    > raid6: using algorithm sse2x4 (5546 MB/s)
    > md: raid6 personality registered for level 6
    > md: raid5 personality registered for level 5
    > md: raid4 personality registered for level 4
    > md: md0 stopped.
    > md: bind
    > md: bind
    > md: bind
    > raid1: raid set md0 active with 2 out of 2 mirrors
    > md: md1 stopped.
    > md: bind
    > md: bind
    > md: bind
    > raid5: device sda3 operational as raid disk 0
    > raid5: device sdc3 operational as raid disk 2
    > raid5: device sdb3 operational as raid disk 1
    > raid5: allocated 3212kB for md1
    > raid5: raid level 5 set md1 active with 3 out of 3 devices, algorithm 2
    > RAID5 conf printout:
    > --- rd:3 wd:3 fd:0
    > disk 0, o:1, dev:sda3
    > disk 1, o:1, dev:sdb3
    > disk 2, o:1, dev:sdc3
    > device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
    > Attempting manual resume
    > kjournald starting. Commit interval 5 seconds
    > EXT3-fs: mounted filesystem with ordered data mode.
    > ts: Compaq touchscreen protocol output
    > eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
    > input: PC Speaker as /class/input/input2
    > PCI: Enabling device 0000:00:1f.3 (0001 -> 0003)
    > ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 225
    > GSI 22 sharing vector 0x32 and IRQ 22
    > ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50
    > PCI: Setting latency timer of device 0000:00:1b.0 to 64
    > hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
    > Adding 979956k swap on /dev/sda2. Priority:-1 extents:1 across:979956k
    > Adding 979956k swap on /dev/sdb2. Priority:-2 extents:1 across:979956k
    > Adding 979956k swap on /dev/sdc2. Priority:-3 extents:1 across:979956k
    > EXT3 FS on md0, internal journal
    > loop: loaded (max 8 devices)
    > ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
    > ieee1394: sbp2: Try serialize_io=0 for better performance
    > agpgart: Detected an Intel 965G Chipset.
    > agpgart: Detected 7676K stolen memory.
    > agpgart: AGP aperture is 512M @ 0xd0000000
    > kjournald starting. Commit interval 5 seconds
    > EXT3 FS on dm-0, internal journal
    > EXT3-fs: mounted filesystem with ordered data mode.
    > kjournald starting. Commit interval 5 seconds
    > EXT3 FS on dm-1, internal journal
    > EXT3-fs: mounted filesystem with ordered data mode.
    > kjournald starting. Commit interval 5 seconds
    > EXT3 FS on dm-4, internal journal
    > EXT3-fs: mounted filesystem with ordered data mode.
    > kjournald starting. Commit interval 5 seconds
    > EXT3 FS on dm-5, internal journal
    > EXT3-fs: mounted filesystem with ordered data mode.
    > kjournald starting. Commit interval 5 seconds
    > EXT3 FS on dm-2, internal journal
    > EXT3-fs: mounted filesystem with ordered data mode.
    > kjournald starting. Commit interval 5 seconds
    > EXT3 FS on dm-3, internal journal
    > EXT3-fs: mounted filesystem with ordered data mode.
    > skge eth1: enabling interface
    > skge eth1: Link is up at 100 Mbps, full duplex, flow control tx and rx
    > ACPI: Power Button (FF) [PWRF]
    > ACPI: Power Button (CM) [PWRB]
    > pnp: the driver 'parport_pc' has been registered
    > lp: driver loaded but no devices found
    > ppdev: user-space parallel port driver
    > NET: Registered protocol family 10
    > lo: Disabled Privacy Extensions
    > IPv6 over IPv4 tunneling driver
    > [drm] Initialized drm 1.0.1 20051102
    > ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 201
    > [drm] Initialized i915 1.5.0 20060119 on minor 0
    > eth1: no IPv6 routers present
    >
    >
    > ------------------------------------------------------------------------
    >
    > Linux version 2.6.19.5 (root@Knoppix) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #4 SMP PREEMPT Sat Mar 3 02:19:32 CET 2007
    > BIOS-provided physical RAM map:
    > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    > BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    > BIOS-e820: 0000000000100000 - 000000007e790000 (usable)
    > BIOS-e820: 000000007e790000 - 000000007e79e000 (ACPI data)
    > BIOS-e820: 000000007e79e000 - 000000007e7e0000 (ACPI NVS)
    > BIOS-e820: 000000007e7e0000 - 000000007e800000 (reserved)
    > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    > BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
    > 1127MB HIGHMEM available.
    > 896MB LOWMEM available.
    > found SMP MP-table at 000ff780
    > Entering add_active_range(0, 0, 518032) 0 entries of 256 used
    > Zone PFN ranges:
    > DMA 0 -> 4096
    > Normal 4096 -> 229376
    > HighMem 229376 -> 518032
    > early_node_map[1] active PFN ranges
    > 0: 0 -> 518032
    > On node 0 totalpages: 518032
    > DMA zone: 32 pages used for memmap
    > DMA zone: 0 pages reserved
    > DMA zone: 4064 pages, LIFO batch:0
    > Normal zone: 1760 pages used for memmap
    > Normal zone: 223520 pages, LIFO batch:31
    > HighMem zone: 2255 pages used for memmap
    > HighMem zone: 286401 pages, LIFO batch:31
    > DMI 2.4 present.
    > ACPI: RSDP (v000 ACPIAM ) @ 0x000fad70
    > ACPI: RSDT (v001 NEC 0x03000719 MSFT 0x00000097) @ 0x7e790000
    > ACPI: FADT (v002 MSTEST OEMFACP 0x03000719 MSFT 0x00000097) @ 0x7e790200
    > ACPI: MADT (v001 MSTEST OEMAPIC 0x03000719 MSFT 0x00000097) @ 0x7e790390
    > ACPI: MCFG (v001 MSTEST OEMMCFG 0x03000719 MSFT 0x00000097) @ 0x7e790400
    > ACPI: SLIC (v001 NEC 0x03000719 MSFT 0x00000097) @ 0x7e790440
    > ACPI: OEMB (v001 MSTEST AMI_OEM 0x03000719 MSFT 0x00000097) @ 0x7e79e040
    > ACPI: HPET (v001 MSTEST OEMHPET 0x03000719 MSFT 0x00000097) @ 0x7e79a250
    > ACPI: ASF! (v032 LEGEND I865PASF 0x00000001 INTL 0x20060113) @ 0x7e79a288
    > ACPI: GSCI (v001 MSTEST GMCHSCI 0x03000719 MSFT 0x00000097) @ 0x7e79e0c0
    > ACPI: SSDT (v001 AMI CPU1PM 0x00000001 INTL 0x20060113) @ 0x7e7a00f0
    > ACPI: SSDT (v001 AMI CPU2PM 0x00000001 INTL 0x20060113) @ 0x7e7a02b0
    > ACPI: DSDT (v001 A0579 A0579000 0x00000000 INTL 0x20060113) @ 0x00000000
    > ACPI: PM-Timer IO Port: 0x808
    > ACPI: Local APIC address 0xfee00000
    > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    > Processor #0 6:15 APIC version 20
    > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    > Processor #1 6:15 APIC version 20
    > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
    > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    > ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    > IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    > ACPI: IRQ0 used by override.
    > ACPI: IRQ2 used by override.
    > ACPI: IRQ9 used by override.
    > Enabling APIC mode: Flat. Using 1 I/O APICs
    > ACPI: HPET id: 0x8086a202 base: 0xfed00000
    > Using ACPI (MADT) for SMP configuration information
    > Allocating PCI resources starting at 80000000 (gap: 7e800000:80600000)
    > Detected 1866.736 MHz processor.
    > Built 1 zonelists. Total pages: 513985
    > Kernel command line: ramdisk_size=100000 init=/etc/init lang=de apm=power-off vga=791 initrd=minirt.gz nomce loglevel=0 libata.atapi_enabled=1 quiet nmi_watchdog=0 BOOT_IMAGE=knoppix BOOT_IMAGE=linux
    > mapped APIC to ffffd000 (fee00000)
    > mapped IOAPIC to ffffc000 (fec00000)
    > Enabling fast FPU save and restore... done.
    > Enabling unmasked SIMD FPU exception support... done.
    > Initializing CPU#0
    > PID hash table entries: 4096 (order: 12, 16384 bytes)
    > Console: colour dummy device 80x25
    > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    > Memory: 2048256k/2072128k available (2748k kernel code, 22668k reserved, 956k data, 336k init, 1154624k highmem)
    > virtual kernel memory layout:
    > fixmap : 0xffe16000 - 0xfffff000 (1956 kB)
    > pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    > vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
    > lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
    > .init : 0xc04a6000 - 0xc04fa000 ( 336 kB)
    > .data : 0xc03af3bc - 0xc049e7b4 ( 956 kB)
    > .text : 0xc0100000 - 0xc03af3bc (2748 kB)
    > Checking if this processor honours the WP bit even in supervisor mode... Ok.
    > Using HPET for base-timer
    > Calibrating delay using timer specific routine.. 3736.14 BogoMIPS (lpj=7472281)
    > Security Framework v1.0.0 initialized
    > SELinux: Disabled at boot.
    > Capability LSM initialized
    > Mount-cache hash table entries: 512
    > CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
    > monitor/mwait feature present.
    > using mwait in idle threads.
    > CPU: L1 I cache: 32K, L1 D cache: 32K
    > CPU: L2 cache: 4096K
    > CPU: Physical Processor ID: 0
    > CPU: Processor Core ID: 0
    > CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0000e3bd 00000000 00000001
    > Compat vDSO mapped to ffffe000.
    > Checking 'hlt' instruction... OK.
    > Checking for popad bug... OK.
    > SMP alternatives: switching to UP code
    > ACPI: Core revision 20060707
    > CPU0: Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz stepping 06
    > SMP alternatives: switching to SMP code
    > Booting processor 1/1 eip 3000
    > Initializing CPU#1
    > Calibrating delay using timer specific routine.. 3733.42 BogoMIPS (lpj=7466847)
    > CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
    > monitor/mwait feature present.
    > CPU: L1 I cache: 32K, L1 D cache: 32K
    > CPU: L2 cache: 4096K
    > CPU: Physical Processor ID: 0
    > CPU: Processor Core ID: 1
    > CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0000e3bd 00000000 00000001
    > CPU1: Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz stepping 06
    > Total of 2 processors activated (7469.56 BogoMIPS).
    > ENABLING IO-APIC IRQs
    > ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    > checking TSC synchronization across 2 CPUs: passed.
    > Brought up 2 CPUs
    > migration_cost=665
    > checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
    > Freeing initrd memory: 1189k freed
    > NET: Registered protocol family 16
    > EISA bus registered
    > ACPI: bus type pci registered
    > PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
    > PCI: Not using MMCONFIG.
    > PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
    > PCI: Using configuration type 1
    > Setting up standard PCI resources
    > ACPI: Interpreter enabled
    > ACPI: Using IOAPIC for interrupt routing
    > ACPI: PCI Root Bridge [PCI0] (0000:00)
    > PCI: Probing PCI hardware (bus 00)
    > Boot video device is 0000:00:02.0
    > PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
    > PCI quirk: region 0480-04bf claimed by ICH6 GPIO
    > PCI: Transparent bridge - 0000:00:1e.0
    > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
    > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
    > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
    > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
    > ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
    > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    > Linux Plug and Play Support v0.97 (c) Adam Belay
    > pnp: PnP ACPI init
    > pnp: PnP ACPI: found 14 devices
    > PnPBIOS: Disabled by ACPI PNP
    > SCSI subsystem initialized
    > libata version 2.00 loaded.
    > PCI: Using ACPI for IRQ routing
    > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    > NetLabel: Initializing
    > NetLabel: domain hash size = 128
    > NetLabel: protocols = UNLABELED CIPSOv4
    > NetLabel: unlabeled traffic allowed by default
    > pnp: 00:07: ioport range 0x290-0x297 has been reserved
    > PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
    > PCI: Bridge: 0000:00:1c.0
    > IO window: disabled.
    > MEM window: disabled.
    > PREFETCH window: bfe00000-bfefffff
    > PCI: Bridge: 0000:00:1c.4
    > IO window: a000-afff
    > MEM window: ff400000-ff4fffff
    > PREFETCH window: disabled.
    > PCI: Bridge: 0000:00:1e.0
    > IO window: b000-bfff
    > MEM window: ff500000-ff5fffff
    > PREFETCH window: 80000000-800fffff
    > ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
    > PCI: Setting latency timer of device 0000:00:1c.0 to 64
    > ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 16
    > PCI: Setting latency timer of device 0000:00:1c.4 to 64
    > PCI: Setting latency timer of device 0000:00:1e.0 to 64
    > NET: Registered protocol family 2
    > IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    > TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
    > TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
    > TCP: Hash tables configured (established 131072 bind 65536)
    > TCP reno registered
    > audit: initializing netlink socket (disabled)
    > audit(1183842679.792:1): initialized
    > highmem bounce pool size: 64 pages
    > Total HugeTLB memory allocated, 0
    > VFS: Disk quotas dquot_6.5.1
    > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    > fuse init (API version 7.8)
    > fuse distribution version: 2.6.1
    > io scheduler noop registered
    > io scheduler anticipatory registered
    > io scheduler deadline registered (default)
    > io scheduler cfq registered
    > PCI: Setting latency timer of device 0000:00:1c.0 to 64
    > assign_interrupt_mode Found MSI capability
    > Allocate Port Service[0000:00:1c.0cie00]
    > Allocate Port Service[0000:00:1c.0cie02]
    > PCI: Setting latency timer of device 0000:00:1c.4 to 64
    > assign_interrupt_mode Found MSI capability
    > Allocate Port Service[0000:00:1c.4cie00]
    > Allocate Port Service[0000:00:1c.4cie02]
    > vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3072k, total 7616k
    > vesafb: mode is 1024x768x16, linelength=2048, pages=3
    > vesafb: protected mode interface info at 00ff:44f0
    > vesafb: scrolling: redraw
    > vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    > Console: switching to colour frame buffer device 128x48
    > fb0: VESA VGA frame buffer device
    > isapnp: Scanning for PnP cards...
    > isapnp: No Plug & Play device found
    > Real Time Clock Driver v1.12ac
    > floppy0: no floppy controllers found
    > RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
    > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    > JMB363: IDE controller at PCI slot 0000:01:00.1
    > PCI: Enabling device 0000:01:00.1 (0000 -> 0001)
    > ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 17 (level, low) -> IRQ 16
    > JMB363: chipset revision 3
    > JMB363: 100% native mode on irq 16
    > PCI: Setting latency timer of device 0000:01:00.1 to 64
    > ide2: BM-DMA at 0xa400-0xa407, BIOS settings: hdeio, hdfio
    > ide3: BM-DMA at 0xa408-0xa40f, BIOS settings: hdgMA, hdhMA
    > Probing IDE interface ide2...
    > Probing IDE interface ide3...
    > Probing IDE interface ide0...
    > Probing IDE interface ide1...
    > Probing IDE interface ide2...
    > Probing IDE interface ide3...
    > Loading iSCSI transport class v2.0-724.<7>ahci 0000:01:00.0: version 2.0
    > ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17
    > PCI: Setting latency timer of device 0000:01:00.0 to 64
    > ahci 0000:01:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
    > ahci 0000:01:00.0: flags: 64bit ncq pm led clo pmp pio slum part
    > ata1: SATA max UDMA/133 cmd 0xF8828100 ctl 0x0 bmdma 0x0 irq 17
    > ata2: SATA max UDMA/133 cmd 0xF8828180 ctl 0x0 bmdma 0x0 irq 17
    > scsi0 : ahci
    > ata1: SATA link down (SStatus 0 SControl 300)
    > scsi1 : ahci
    > ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    > ata2.00: ATAPI, max UDMA/100
    > ata2.00: configured for UDMA/100
    > scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H62N CL00 PQ: 0 ANSI: 5
    > ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    > ata2.00: (irq_stat 0x48000000, interface fatal error)
    > ata2.00: tag 0 cmd 0xa0 Emask 0x50 stat 0x51 err 0x64 (ATA bus error)
    > ata2: soft resetting port
    > ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    > ata2.00: configured for UDMA/100
    > ata2: EH complete
    > sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
    > Uniform CD-ROM driver Revision: 3.20
    > sr 1:0:0:0: Attached scsi CD-ROM sr0
    > ata_piix 0000:00:1f.2: version 2.00ac6
    > ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    > ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18
    > PCI: Setting latency timer of device 0000:00:1f.2 to 64
    > ata3: SATA max UDMA/133 cmd 0xE880 ctl 0xE802 bmdma 0xE080 irq 18
    > ata4: SATA max UDMA/133 cmd 0xE480 ctl 0xE402 bmdma 0xE088 irq 18
    > scsi2 : ata_piix
    > ata3.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32)
    > ata3.00: ata3: dev 0 multi count 16
    > ata3.00: configured for UDMA/133
    > scsi3 : ata_piix
    > ata4.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32)
    > ata4.00: ata4: dev 0 multi count 16
    > ata4.00: configured for UDMA/133
    > scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
    > SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
    > sda: Write Protect is off
    > sda: Mode Sense: 00 3a 00 00
    > SCSI device sda: drive cache: write back
    > SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
    > sda: Write Protect is off
    > sda: Mode Sense: 00 3a 00 00
    > SCSI device sda: drive cache: write back
    > sda: sda1 sda2 sda3
    > sd 2:0:0:0: Attached scsi disk sda
    > scsi 3:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
    > SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
    > sdb: Write Protect is off
    > sdb: Mode Sense: 00 3a 00 00
    > SCSI device sdb: drive cache: write back
    > SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
    > sdb: Write Protect is off
    > sdb: Mode Sense: 00 3a 00 00
    > SCSI device sdb: drive cache: write back
    > sdb: sdb1 sdb2 sdb3
    > sd 3:0:0:0: Attached scsi disk sdb
    > ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
    > ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 18
    > PCI: Setting latency timer of device 0000:00:1f.5 to 64
    > ata5: SATA max UDMA/133 cmd 0xD080 ctl 0xD002 bmdma 0xC800 irq 18
    > ata6: SATA max UDMA/133 cmd 0xCC00 ctl 0xC882 bmdma 0xC808 irq 18
    > scsi4 : ata_piix
    > ata5.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32)
    > ata5.00: ata5: dev 0 multi count 16
    > ata5.00: configured for UDMA/133
    > scsi5 : ata_piix
    > ATA: abnormal status 0x7F on port 0xCC07
    > scsi 4:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
    > SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB)
    > sdc: Write Protect is off
    > sdc: Mode Sense: 00 3a 00 00
    > SCSI device sdc: drive cache: write back
    > SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB)
    > sdc: Write Protect is off
    > sdc: Mode Sense: 00 3a 00 00
    > SCSI device sdc: drive cache: write back
    > sdc: sdc1 sdc2 sdc3
    > sd 4:0:0:0: Attached scsi disk sdc
    > PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    > PNP: PS/2 controller doesn't have AUX irq; using default 12
    > serio: i8042 KBD port at 0x60,0x64 irq 1
    > serio: i8042 AUX port at 0x60,0x64 irq 12
    > mice: PS/2 mouse device common for all mice
    > EISA: Probing bus 0 at eisa.0
    > EISA: Detected 0 cards.
    > Initializing XFRM netlink socket
    > NET: Registered protocol family 1
    > NET: Registered protocol family 15
    > Using IPI No-Shortcut mode
    > ACPI: (supports S0 S1 S3 S4 S5)
    > Time: tsc clocksource has been installed.
    > input: AT Translated Set 2 keyboard as /class/input/input0
    > RAMDISK: Compressed image found at block 0
    > VFS: Mounted root (ext2 filesystem).
    > Failed initialization of WD-7000 SCSI card!
    > usbcore: registered new interface driver usbfs
    > usbcore: registered new interface driver hub
    > usbcore: registered new device driver usb
    > ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 19
    > PCI: Setting latency timer of device 0000:00:1a.7 to 64
    > ehci_hcd 0000:00:1a.7: EHCI Host Controller
    > ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    > ehci_hcd 0000:00:1a.7: debug port 1
    > PCI: cache line size of 32 is not supported by device 0000:00:1a.7
    > ehci_hcd 0000:00:1a.7: irq 19, io mem 0xff9fb800
    > ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    > usb usb1: configuration #1 chosen from 1 choice
    > hub 1-0:1.0: USB hub found
    > hub 1-0:1.0: 4 ports detected
    > ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
    > PCI: Setting latency timer of device 0000:00:1d.7 to 64
    > ehci_hcd 0000:00:1d.7: EHCI Host Controller
    > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    > ehci_hcd 0000:00:1d.7: debug port 1
    > PCI: cache line size of 32 is not supported by device 0000:00:1d.7
    > ehci_hcd 0000:00:1d.7: irq 20, io mem 0xff9fb400
    > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    > usb usb2: configuration #1 chosen from 1 choice
    > hub 2-0:1.0: USB hub found
    > hub 2-0:1.0: 6 ports detected
    > USB Universal Host Controller Interface driver v3.0
    > ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 17
    > PCI: Setting latency timer of device 0000:00:1a.0 to 64
    > uhci_hcd 0000:00:1a.0: UHCI Host Controller
    > uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    > uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000d880
    > usb usb3: configuration #1 chosen from 1 choice
    > hub 3-0:1.0: USB hub found
    > hub 3-0:1.0: 2 ports detected
    > ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 16
    > PCI: Setting latency timer of device 0000:00:1a.1 to 64
    > uhci_hcd 0000:00:1a.1: UHCI Host Controller
    > uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    > uhci_hcd 0000:00:1a.1: irq 16, io base 0x0000dc00
    > usb usb4: configuration #1 chosen from 1 choice
    > hub 4-0:1.0: USB hub found
    > hub 4-0:1.0: 2 ports detected
    > ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
    > PCI: Setting latency timer of device 0000:00:1d.0 to 64
    > uhci_hcd 0000:00:1d.0: UHCI Host Controller
    > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    > uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000d400
    > usb usb5: configuration #1 chosen from 1 choice
    > hub 5-0:1.0: USB hub found
    > hub 5-0:1.0: 2 ports detected
    > ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
    > PCI: Setting latency timer of device 0000:00:1d.1 to 64
    > uhci_hcd 0000:00:1d.1: UHCI Host Controller
    > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    > uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000d480
    > usb usb6: configuration #1 chosen from 1 choice
    > hub 6-0:1.0: USB hub found
    > hub 6-0:1.0: 2 ports detected
    > ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
    > PCI: Setting latency timer of device 0000:00:1d.2 to 64
    > uhci_hcd 0000:00:1d.2: UHCI Host Controller
    > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    > uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000d800
    > usb usb7: configuration #1 chosen from 1 choice
    > hub 7-0:1.0: USB hub found
    > hub 7-0:1.0: 2 ports detected
    > ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    > usb 7-2: new low speed USB device using uhci_hcd and address 2
    > usb 7-2: configuration #1 chosen from 1 choice
    > usbcore: registered new interface driver libusual
    > usbcore: registered new interface driver hiddev
    > input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
    > input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-2
    > usbcore: registered new interface driver usbhid
    > drivers/usb/input/hid-core.c: v2.6:USB HID core driver
    > Initializing USB Mass Storage driver...
    > usbcore: registered new interface driver usb-storage
    > USB Mass Storage support registered.
    > ieee1394: Initialized config rom entry `ip1394'
    > ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 21 (level, low) -> IRQ 21
    > ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[ff5ff800-ff5fffff] Max Packet=[2048] IR/IT contexts=[4/8]
    > ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
    > ieee1394: sbp2: Try serialize_io=0 for better performance
    > ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800015071d2]
    > ISO 9660 Extensions: Microsoft Joliet Level 3
    > ISO 9660 Extensions: RRIP_1991A
    > cloop: Initializing cloop v2.06
    > cloop: loaded (max 8 devices)
    > cloop: /cdrom/KNOPPIX/KNOPPIX: 49667 blocks, 131072 bytes/block, largest block is 131118 bytes.
    > cloop: loaded 256 blocks into cache.
    > ISO 9660 Extensions: RRIP_1991A
    > cloop: losetup_file: 38179 blocks, 131072 bytes/block, largest block is 131118 bytes.
    > cloop: loaded 256 blocks into cache.
    > ISO 9660 Extensions: RRIP_1991A
    > aufs 20070226
    > Freeing unused kernel memory: 336k freed
    > ACPI: Power Button (FF) [PWRF]
    > ACPI: Power Button (CM) [PWRB]
    > Using specific hotkey driver
    > ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
    > ACPI: Getting cpuindex for acpiid 0x3
    > ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
    > ACPI: Getting cpuindex for acpiid 0x4
    > cpufreq: No nForce2 chipset.
    > p4-clockmod: Unknown p4-clockmod-capable CPU. Please send an e-mail to
    > p4-clockmod: Unknown p4-clockmod-capable CPU. Please send an e-mail to
    > powernow: This module only works with AMD K7 CPUs
    > ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    > ata2.00: (irq_stat 0x48000000, interface fatal error)
    > ata2.00: tag 0 cmd 0xa0 Emask 0x50 stat 0x51 err 0x54 (ATA bus error)
    > ata2: soft resetting port
    > ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    > ata2.00: configured for UDMA/100
    > ata2: EH complete
    > eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
    > ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    > ata2.00: (irq_stat 0x48000000, interface fatal error)
    > ata2.00: tag 0 cmd 0xa0 Emask 0x50 stat 0x51 err 0x54 (ATA bus error)
    > sr 1:0:0:0: Attached scsi generic sg0 type 5
    > sd 2:0:0:0: Attached scsi generic sg1 type 0
    > sd 3:0:0:0: Attached scsi generic sg2 type 0
    > sd 4:0:0:0: Attached scsi generic sg3 type 0
    > ata2: soft resetting port
    > ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    > ata2.00: configured for UDMA/100
    > ata2: EH complete
    > PCI: Enabling device 0000:00:1f.3 (0001 -> 0003)
    > ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 19
    > Linux agpgart interface v0.101 (c) Dave Jones
    > agpgart: Detected an Intel 965G Chipset.
    > agpgart: Detected 7676K stolen memory.
    > agpgart: AGP aperture is 512M @ 0xd0000000
    > ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 19 (level, low) -> IRQ 18
    > skge 1.9 addr 0xff5f8000 irq 18 chip Yukon-Lite rev 9
    > skge eth1: addr 00:1b:fc:7c:0a:bd
    > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    > 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    > ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
    > PCI: Setting latency timer of device 0000:00:1b.0 to 64
    > hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
    > device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
    > Adding 979956k swap on /dev/sda2. Priority:-1 extents:1 across:979956k
    > Adding 979956k swap on /dev/sdb2. Priority:-2 extents:1 across:979956k
    > Adding 979956k swap on /dev/sdc2. Priority:-3 extents:1 across:979956k
    > NET: Registered protocol family 17
    > skge eth1: enabling interface
    > skge eth1: Link is up at 100 Mbps, full duplex, flow control both
    > [drm] Initialized drm 1.0.1 20051102
    > NET: Registered protocol family 10
    > lo: Disabled Privacy Extensions
    > Mobile IPv6
    > ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
    > [drm] Initialized i915 1.5.0 20060119 on minor 0
    > eth1: no IPv6 routers present
    > skge eth1: disabling interface
    > skge eth1: enabling interface
    > skge eth1: Link is up at 100 Mbps, full duplex, flow control both
    > eth1: no IPv6 routers present


  3. Re: Etch not detecting DVD writer

    On 07/08/2007 10:35 AM, ken scharf wrote:
    >
    > > scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H62N CL00 PQ: 0

    > ANSI: 5
    > > ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    > > ata2.00: (irq_stat 0x48000000, interface fatal error)
    > > ata2.00: tag 0 cmd 0xa0 Emask 0x50 stat 0x51 err 0x64 (ATA bus error)
    > > ata2: soft resetting port
    > > ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    > > ata2.00: configured for UDMA/100
    > > ata2: EH complete
    > > sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
    > > Uniform CD-ROM driver Revision: 3.20
    > > sr 1:0:0:0: Attached scsi CD-ROM sr0
    > > ata_piix 0000:00:1f.2: version 2.00ac6
    > > ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    > > ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18 [...]

    >
    > Looks like a dvd rw drive WAS detected at ata2.00 assigned to sr0
    >
    >


    That's Knoppix--not Etch.

    Mr. Lutz, if you must, you can download 2.6.19 from kernel.org and build
    it the old fashioned way.

    First check out backports.org to see if they have a 2.6.19 kernel for Etch.

  4. Re: Etch not detecting DVD writer

    Mumia W. wrote:
    > Mr. Lutz, if you must, you can download 2.6.19 from kernel.org and build
    > it the old fashioned way.
    >
    > First check out backports.org to see if they have a 2.6.19 kernel for Etch.


    I hoped to get around that, since the Etch installer worked without
    problems. Do you see any chance with the 2.6.18.4 kernel for this setup?

    Cheers,
    Manfred

  5. Re: Etch not detecting DVD writer

    Manfred Lutz wrote:
    > I hoped to get around that, since the Etch installer worked without
    > problems. Do you see any chance with the 2.6.18.4 kernel for this setup?


    Please ignore that one, just picked the latest available 2.6.21 kernel
    on backports.org. That solved the problem.

    Thanks for your help!

    Cheer,
    Manfred

+ Reply to Thread