I got new hard drive. Western Digital 200gb on sata. I connected it to
my pc and I run disklabel
then I run newfs and after that I mounted it and I saw
/dev/wd1a 183G 7.8T 347G 4602% /mnt/wd1

so I was traying to run fsck -f /dev/wd1a and what I saw? is :

`--# fsck_ffs -fy /dev/wd1a
** /dev/rwd1a
** File system is already clean
cannot alloc 4294964892 bytes for inphead


and here is my output of disklabel wd1

`--# disklabel wd1
# Inside MBR partition 0: type A9 start 63 size 390721905
# /dev/rwd1c:
type: ESDI
disk: WDC WD2000JD-22H
label: fictitious
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 16
sectors/cylinder: 1008
cylinders: 387621
total sectors: 390721968
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0 # microseconds
track-to-track seek: 0 # microseconds
drivedata: 0

5 partitions:
# size offset fstype [fsize bsize cpg]
a: 390721905 63 4.2BSD 2048 16384 328 # Cyl
0*-387620
c: 390721905 63 unused 0 0 # Cyl
0*-387620



and one more thing there is none in logs about fsck or anything else