=?big5?B?aGVscCAuLi5IQUNNUKq6sN3DRA==?= - Aix

This is a discussion on =?big5?B?aGVscCAuLi5IQUNNUKq6sN3DRA==?= - Aix ; 請問一下... 為什麼我在Verifying HACMP config時出現下列訊息: ERROR: Volume Group rootvg on node: p650 is configured to auto-varyon. 後來我把Resource Group*奐s更改址輸入file susyems名稱不輸入vg名稱就可以Verifying & sync HACMP config HACMP start也正常; 但是在stop HACMP或是takeover時無法release resource group:volume group, file systems; services IP等; 檢查/tmp/hacmp.out後發現卡在umount /hd4 /var /usr...都是rootvg的file systems 請高手幫幫忙...

+ Reply to Thread
Results 1 to 2 of 2

Thread: =?big5?B?aGVscCAuLi5IQUNNUKq6sN3DRA==?=

  1. =?big5?B?aGVscCAuLi5IQUNNUKq6sN3DRA==?=

    請問一下...
    為什麼我在Verifying HACMP config時出現下列訊息:
    ERROR: Volume Group rootvg on node: p650 is configured to auto-varyon.
    後來我把Resource Group*奐s更改址輸入file
    susyems名稱不輸入vg名稱就可以Verifying & sync HACMP config
    HACMP start也正常;
    但是在stop HACMP或是takeover時無法release resource group:volume
    group, file systems; services IP等;
    檢查/tmp/hacmp.out後發現卡在umount /hd4 /var
    /usr...都是rootvg的file systems
    請高手幫幫忙

  2. =?big5?B?UmU6IGhlbHAgLi4uSEFDTVCqurDdw0Q=?=


    byron.hsu@neweb.com.tw wrote:
    > 請問一下...
    > 為什麼我在Verifying HACMP config時出現下列訊息:
    > ERROR: Volume Group rootvg on node: p650 is configured to auto-varyon.
    > 後來我把Resource Group*奐s更改址輸入file
    > susyems名稱不輸入vg名稱就可以Verifying & syncHACMP config
    > HACMP start也正常;
    > 但是在stop HACMP或是takeover時無法release resource group:volume
    > group, file systems; services IP等;
    > 檢查/tmp/hacmp.out後發現卡在umount /hd4 /var
    > /usr...都是rootvg的file systems
    > 請高手幫幫忙


    1. Don't put rootvg or any portion of it in the resource group.

    2. Assuming you didn't intentionally put rootvg in the resource group,
    look at lslv for each LV in rootvg and see if it has a label field
    that matches a filesystem name for a filesystem that IS in the
    resource group ( This can happen when you migrate rootvg , rename
    filesystems in /etc/filesystems without using chfs , stuff like that)


    If hacmp sees a filesystem name or lv name that matches ANYTHING it
    sees in the resource group definition it will pull in the whole volume
    group . Then it will try to vary it off on fallover , etc. If it's
    rootvg , it ain't gonna work.


+ Reply to Thread