On Mon, 25 Aug 2008 19:50:01 -0700, ChasX
wrote:
>>I have a DSL modem connected to a linksys 4 port switch with wireless
>>capabilities(802.11B), 3 computers ,2 wired directly to the switch(one Vista,
>>one XP prof.), and an IBM laptop with a Microsoft MN-720 card(running XP
>>Prof.). The signal to the laptop is exceptionally strong. I was running 6
>>MB downloads to the wired computers(good numbers etc). I received 3Mb d.l. to
>>the wireless laptop. I wire the laptop to the switch and receive 6MB. I
>>upgraded to a 12 MB connection and the wired computers d.l. at 12 MB, but the
>>laptop receives 6MB (1/2 actually). I wired the laptop to the switch and
>>received 12 MB d.l. Is there a reason for the 1/2 speed d.l. on the laptop.
>>Incidentally the wireless is encrypted but I repeated all of the above
>>without encryption with the same results. I repeated this whole exercise on
>>a different system and a different carrier with the same results. It seems
>>as though the MN-720 card is not configured properly and I can't figure out
>>how to configure it. Your help would be appreciated.
>>thankyou very much . chas
Before you do any configuring, you might want to do a web search on
comparing speeds between wireless and wired.
--
The seabat
Filtering GoogleGroups & Groupies with extreme prejudice!
Usenet Improvement Project: http://improve-usenet.org/