june wrote:
> Rod Speed wrote:
>> june wrote:
>>> june wrote:
>>>> Hi
>>>>
>>>> had a few pc issues recently
>>>>
>>>> so went for a full format of the c: partition
>>>> and full load from scratch
>>>>
>>>> then after about 6 backups later - so pc fully loaded
>>>>
>>>> acronis failed to start up - didnt think anything of it
>>>>
>>>> was ok after
>>>>
>>>> had a printer install hang - so had a forced reboot
>>>>
>>>> so decided to go backto the image before the printer to be extra
>>>> clean acronis said image corrupt - oh dear . . .
>>>>
>>>> anyway - if i boot up from the acronis boot cd - all images verify
>>>> so i reinstalled back to the one it wouldnt do before
>>>>
>>>> pc back to normal
>>>>
>>>> but every time i do a checkdisk it always finds a few minor errors
>>>>
>>>> i know in it self they are nothing - e.g. unused indexes etc.
>>>>
>>>> but its every time
>>>>
>>>> it leaves me with an uneasy feeling - wondering if its HD or maybe
>>>> the sata cable ?
>>>>
>>>>
>>>> any ideas welcome
>>>>
>>>> thanks
>>>>
>>>
>>> from speedfan smart readings
>>>
>>> Attribute Current Raw Overall
>>> Raw Read Error Rate 100 0 Normal
>>> 3Spin Up Time 77 7640 Normal
>>> Start/Stop Count 100 217 Very good
>>> Reallocated Sector Count100 0 Very good
>>> Seek Error Rate 253 0 Very good
>>> Seek Time Performance 100 0 Very good
>>> Power On Hours Count 100 556 Very good
>>> Spin Retry Count 100 0 Very good
>>> Calibration Retry Count 100 0 Very good
>>> Power Cycle Count 100 214 Very good
>>> Read Soft Error Rate 100 0 Normal
>>> Unknown attribute 183 100 0 Very good
>>> Unknown attribute 184 100 0 Very good
>>> Unknown attribute 187 100 0 Very good
>>> Unknown attribute 188 100 0 Very good
>>> Airflow Temperature 74 437321754 Good
>>> Hardware ECC Recovered 100 166714 Very good
>>> Reallocated Event Count 100 0 Very good
>>> Current Pending Sector 100 0 Very good
>>> Offline Uncorrectable Sector Count 100 0 Very good
>>> Ultra DMA CRC Error Rate 100 0 Normal
>>> Write Error Rate 100 0 Normal
>>> Soft Read Error Rate 253 0 Very good
>>
>> The hard drive looks fine.
>>
>> Is there anything useful in the system logs ?
>>
>> You dont say what OS you are using.
>>
>
> hi
>
> xp pro sp3
>
>
> error code
> ==========
>
> 32 (0x70020) date time The archive is corrupted: None
>
>
> 502 (0x101F6) date time Operation with partition "0-0" was terminated
> details image corruption (0x70020)
> tag = 0xF5F8CBCF76155638
>
>
> not checked disk for a day - so might do tomorrow
>
>
> the big tag show sup on google but in foreign
>
> http://www.google.co.uk/search?q=0xF...s=sn4&filter=0
>
>
>
>
>
>
>
>
>
>


and the little tag is there as well