 Re: Dlink DWL-G650 (WinXP) works, but not at boot/startup (Code 10)
On Aug 22, 1:28*pm, smlunatick wrote:
> On Aug 22, 1:43*am, Ohaya wrote:
>
>
>
>
>
> > Hi,
>
> > I recently got aDlinkDWL-G50wirelessadapter for one of my older
> > laptops (a Compaq, running WinXP Home SP2).
>
> > TheDlinkcard is a "Rev. B5", and I downloaded the drivers fromDlink
> > and got them installed.
>
> > TheDlinkinstallation installsDlink'sown utility for configuring the
> >wireless, but I wanted to use theWindowsZero config to do that. *At
> > first, when I enabled the "LetWindowsmanage" checkbox, I couldn't get
> > the configuration to show WPA/WPA-PSK, but after a lot of fiddling, I've
> > been able to get that. *I'm not 100% what finally got it working, butI
> > think it may've been installing the WinXP WPA2 update.
>
> > Anyway, things seem to work ok, but I notice that when Ibootthe
> > machine up, and if the card is plugged in when Iboot, it wasn't showing
> > up, and in Device Manager, it showed that the card couldn't start, with
> > a "Code 10".
>
> > If I pop the card out, then back in again,XPdetects it immediately,
> > and thewirelessworks.
>
> > If I leave the card out andbootthe laptop, then plug the card in after
> >XPhas booted, it gets detected.
>
> > I'm probably being a little picky, but I'd like to have the card work in
> > the situation where the card is plugged in already when the laptop is
> > booted, and was wondering if anyone has some ideas about what the
> > problem might be, and how to fix it?
>
> > The driver currently 2.2.4.1, dated 7/14/2004, and the file is
> > ar511.sys, in C:\WINDOWS\SYSTEM32\DRIVERS.
>
> > Thanks in advance!
>
> > Jim
>
> D-Link adapters tend to install a Connection Manger software link in
> the Start-up folder. *If there is one, remove it from the Start-up
> folder andWirelessZero Configuration should work correctly.- Hide quoted text -
>
> - Show quoted text -
Hi,
One of the things that I've noticed is that when I boot WinXP with the
card inserted, I don't hear that "kerplunk" sound, but when I pop the
card out, it makes that sound, and when I re-insert it it makes that
sound.
So, I started thinking that, for some reason, Windows wasn't even
"seeing" the card on boot, so I checked the PCMCIA adapter info in
Device Manager. That had "OZ6912", so I thought maybe I needed an
update for the card controller.
I did some searching, and found the following:
http://www.dslreports.com/forum/remark,16864520
If you look at the 9/12/06 posting from "aldamon", it says:
"Yeah, the latest drivers still didn't work. The OZ6912 Cardbus is
simply not compatible with the card. Here's what O2Micro told me:
There are several 802.11 PC Cards in the field with a compliance issue
to the PC Card Standard. Our products released in past 3 years will
work-around the issue, but OZ6912 is an old product and has this
issue.
The OZ6912 is end-of-life product at O2Micro, there is no support for
it now.
Sorry for this situation.
I returned the card this morning."
So, I think that that is the same thing that is happening with my
situation.
The laptop is a Compaq 2190US, which I "inherited" from my son, and
it's a few years old now, so I think that, unfortunately, that D-Link
DWL-G650 is one of those cards with a "compliance issue".
I'm waiting for a different brand card to arrive, and will try that in
this same laptop to see if it works (I do have some older PCMCIA
cards, an Orinoco Silver, and an "Ambicom", and those work, but
they're only 802.11b).
Thanks,
Jim
 |