DoItUrselfer wrote:
> I got a netgear WAP and plugged it into my router. The indicator light
> that shows it has found a network lights up on the WAP. The
> instructions say to type in the IP on the back of the WAP to access
> its internal setups however it always brings up a page can't be
> displayed. I turned off my firewall. I thought I might have to add the
> IP to my dlink router setup but not sure what settings to choose if I
> do that. I'm sorry I'm such a networking loser. I'm stuck. What's
> scary to me is accessing the IP on the back of the WAP is supposed to
> be the easy part! Can anyone offer suggestions?

"The IP on the back" sounds as if it's a fixed, pre-set IP. That won't
work for an arbitrary network.

The WAP's IP and your computer must be in the same subnet in order for
you to reach the WAP's configuration page. That's why the Netgear WAP
setup instructions usually start by telling you to (temporarily)
configure the pc that you're going to use to configure the WAP by
setting a static IP that's compatible with the default IP of the WAP.

What model Netgear WAP do you have?

--
Lem -- MS-MVP

To the moon and back with 2K words of RAM and 36K words of ROM.
http://en.wikipedia.org/wiki/Apollo_Guidance_Computer
http://history.nasa.gov/afj/compessay.htm